Honeywell 5800RL Frequently Asked Questions

How Do I Set The House ID For a Honeywell LYNX Touch?
The House ID Code for a LYNX Touch can be set from 01 to 31. It is used for communicating with bi-directional wireless devices. Find out how to set the House ID for a LYNX Touch.
Added:
What Frequency Do the 5800 Sensors Operate at?
Honeywell's 5800 series wireless devices operate at 345 MHz. This frequency was assigned to them by the FCC, and should operate free of interference in the US.
Added:
How do I wire the Trigger on the Lyric Gateway?
The Lyric Gateway has no trigger on the main system and is not compatible with any 5800 wireless relay. Learn about why the Lyric has no trigger input.
Added:
How to program House ID for Honeywell 2GIG GC3?
The 2GIG GC3 control panel does not support the use of Honeywell 5800 series devices that use a House ID. Read on to see compatible bi-directional devices.
Added:
How Many Zones Does The Lyric Gateway Have?
Find out how many zones the Lyric Gateway has
Added:
How Do I Add a Honeywell 748 Siren to a L7000 or L5200?
A Honeywell 748 siren is a hardwired dual tone siren designed for indoor and outdoor use. The Lynx Touch L5200 and L7000 does not have a bell output like a hardwired alarm system to power an external siren. A relay must be used if a user wants to add an external siren to the system.
Added:
How Do I Add a Wired Siren to My LYNX Touch Panel using the Lynx-EXT?
Give your LYNX Touch alarm system a louder voice by adding an external sounder!
Added:
What is a DIP switch on an alarm sensor?
Learn what a DIP switch is for an alarm device and how to use them.
Added: