Honeywell 5800WAVE Frequently Asked Questions
Is the Resideo PROA7 Compatible w/ All Resideo Door/Window Sensors?
Resideo Panels will work with most Resideo contacts. For more specifics, let us show you the sometimes confusing details of Resideo vs Honeywell Home products.
How Do I Set The House ID For a Honeywell LYNX Touch?
The House ID Code for a LYNX Touch can be set from 01 to 31. It is used for communicating with bi-directional wireless devices. Find out how to set the House ID for a LYNX Touch.
What Loop Number Does My Honeywell 5800 Series Wireless Device Use?
Different 5800 Series wireless devices use different, and in some cases, multiple loop numbers. Shown is a list of commonly used devices and their loop numbers.
What Frequency Do the 5800 Sensors Operate at?
Honeywell's 5800 series wireless devices operate at 345 MHz. This frequency was assigned to them by the FCC, and should operate free of interference in the US.
How to program House ID for Honeywell 2GIG GC3?
The 2GIG GC3 control panel does not support the use of Honeywell 5800 series devices that use a House ID. Read on to see compatible bi-directional devices.
How Do I Program a Honeywell 5800WAVE to a L5210?
The 5800WAVE simply needs its House ID to match the L5210s House ID to work as a system wireless siren. Learn how to interface the 5800WAVE with the L5210.
Can a Honeywell 5800RP Work on a 2GIG System?
A Honeywell 5800RP can work with any 2GIG system. The 5800 repeater will only communicate with Honeywell 5800 devices that are enrolled to the system.
What is a Loop on the Lyric Gateway
Learn about how loops work on the Lyric Gateway
How Do I Setup a Hardwired Zone on a Lyric Gateway?
Learn how to setup a hardwired zone on a Lyric Gateway
Can I set WIFI Primary, GSM Backup on my Lyric Gateway?
Learn how to set WIFI as Primary and GSM as Backup on a Lyric Gateway
Resideo Panels will work with most Resideo contacts. For more specifics, let us show you the sometimes confusing details of Resideo vs Honeywell Home products.
Added:
How Do I Set The House ID For a Honeywell LYNX Touch?
The House ID Code for a LYNX Touch can be set from 01 to 31. It is used for communicating with bi-directional wireless devices. Find out how to set the House ID for a LYNX Touch.
Added:
What Loop Number Does My Honeywell 5800 Series Wireless Device Use?
Different 5800 Series wireless devices use different, and in some cases, multiple loop numbers. Shown is a list of commonly used devices and their loop numbers.
Added:
What Frequency Do the 5800 Sensors Operate at?
Honeywell's 5800 series wireless devices operate at 345 MHz. This frequency was assigned to them by the FCC, and should operate free of interference in the US.
Added:
How to program House ID for Honeywell 2GIG GC3?
The 2GIG GC3 control panel does not support the use of Honeywell 5800 series devices that use a House ID. Read on to see compatible bi-directional devices.
Added:
How Do I Program a Honeywell 5800WAVE to a L5210?
The 5800WAVE simply needs its House ID to match the L5210s House ID to work as a system wireless siren. Learn how to interface the 5800WAVE with the L5210.
Added:
Can a Honeywell 5800RP Work on a 2GIG System?
A Honeywell 5800RP can work with any 2GIG system. The 5800 repeater will only communicate with Honeywell 5800 devices that are enrolled to the system.
Added:
What is a Loop on the Lyric Gateway
Learn about how loops work on the Lyric Gateway
Added:
How Do I Setup a Hardwired Zone on a Lyric Gateway?
Learn how to setup a hardwired zone on a Lyric Gateway
Added:
Can I set WIFI Primary, GSM Backup on my Lyric Gateway?
Learn how to set WIFI as Primary and GSM as Backup on a Lyric Gateway
Added: