Honeywell Home PROA7PLUS Frequently Asked Questions
How Do I Change a Master Code on a Honeywell Home PROA7?
The Honeywell Home PROA7 has one Master Code. To edit it enter Menu, Settings, User Management and entering the current Master Code. Keep reading to learn more.
Why Can't I Pair a PROWLTOUCH to a PROA7 or PROA7PLUS?
The ProSeries panel and the PROWLTOUCH find each other using a service called "Bonjour" or mDNS. Not all routers handle this well. Learn to overcome this issue.
How Do I Power Down My PROA7 Security System?
To power down the Honeywell Home PROA7 system, first, open the system and disconnect the battery. AC power will be disconnected in one of two ways. Keep reading.
How Do I Add GD00Z-8-GC Garage CNTRL to ProA7/ProA7Plus?
Note the DSK Pin, then mount the hardware. Put the panel into inclusion mode then press the Link button on the GD00Z-8-GC. Enter the Pin when prompted by the panel. Learn more.
Can I Use a Honeywell 5816 Sensor With a Honeywell Home PROA7PLUS?
The Honeywell Home PROA7PLUS will support a Honeywell 5816 after a PROTAKEOVER Legacy Receiver has been installed inside the panel. Learn about using a 5816 with a PROA7PLUS.
Can I Use the Honeywell Home PROA7PLUS with Total Connect 2.0?
The PROA7PLUS has a built-in AlarmNet IP Communicator that allows it to work with Total Connect 2.0. Cellular modules are also available. Learn about using the PROA7PLUS with TC2.
How Do I Add a Z-Wave Lock to a Honeywell Home PROA7PLUS?
The PROA7PLUS has a built-in PROWIFIZW, so Z-Wave locks can be readily paired. User codes can be pushed over to the lock for unlocking and automatic system disarming. Learn more.
Can I Use the PROA7PLUS With Alarm.com?
The Honeywell Home PROA7PLUS cannot be used with Alarm.com. But it can be used with a similar interactive platform called Total Connect 2.0. Learn about the PROA7PLUS.
Can I Use the Resideo PROA7C With Alarm.com?
There is no Alarm.com Communicator for the Resideo PROA7C. This makes it impossible to be used with Alarm.com. But it can be set up with Total Connect 2.0. Learn about the PROA7C.
Why Won't My Honeywell Home PROA7PLUS Connect to WIFI?
Some reasons why a PROA7PLUS might fail to connect to WIFI are something being wrong with its PROWIFIZW, an incorrect network password, or a setting on an Ubiquiti AP. Learn more.
The Honeywell Home PROA7 has one Master Code. To edit it enter Menu, Settings, User Management and entering the current Master Code. Keep reading to learn more.
Added:
Why Can't I Pair a PROWLTOUCH to a PROA7 or PROA7PLUS?
The ProSeries panel and the PROWLTOUCH find each other using a service called "Bonjour" or mDNS. Not all routers handle this well. Learn to overcome this issue.
Added:
How Do I Power Down My PROA7 Security System?
To power down the Honeywell Home PROA7 system, first, open the system and disconnect the battery. AC power will be disconnected in one of two ways. Keep reading.
Added:
How Do I Add GD00Z-8-GC Garage CNTRL to ProA7/ProA7Plus?
Note the DSK Pin, then mount the hardware. Put the panel into inclusion mode then press the Link button on the GD00Z-8-GC. Enter the Pin when prompted by the panel. Learn more.
Added:
Can I Use a Honeywell 5816 Sensor With a Honeywell Home PROA7PLUS?
The Honeywell Home PROA7PLUS will support a Honeywell 5816 after a PROTAKEOVER Legacy Receiver has been installed inside the panel. Learn about using a 5816 with a PROA7PLUS.
Added:
Can I Use the Honeywell Home PROA7PLUS with Total Connect 2.0?
The PROA7PLUS has a built-in AlarmNet IP Communicator that allows it to work with Total Connect 2.0. Cellular modules are also available. Learn about using the PROA7PLUS with TC2.
Added:
How Do I Add a Z-Wave Lock to a Honeywell Home PROA7PLUS?
The PROA7PLUS has a built-in PROWIFIZW, so Z-Wave locks can be readily paired. User codes can be pushed over to the lock for unlocking and automatic system disarming. Learn more.
Added:
Can I Use the PROA7PLUS With Alarm.com?
The Honeywell Home PROA7PLUS cannot be used with Alarm.com. But it can be used with a similar interactive platform called Total Connect 2.0. Learn about the PROA7PLUS.
Added:
Can I Use the Resideo PROA7C With Alarm.com?
There is no Alarm.com Communicator for the Resideo PROA7C. This makes it impossible to be used with Alarm.com. But it can be set up with Total Connect 2.0. Learn about the PROA7C.
Added:
Why Won't My Honeywell Home PROA7PLUS Connect to WIFI?
Some reasons why a PROA7PLUS might fail to connect to WIFI are something being wrong with its PROWIFIZW, an incorrect network password, or a setting on an Ubiquiti AP. Learn more.
Added: