Honeywell Home PROA7PLUS Frequently Asked Questions
How Do I Find the Firmware Version of a PROA7PLUS?
To find the firmware version of a PROA7PLUS enter the Installer Tools menu then check System Information then General Information. Click here to learn more.
What Is the Default Installer Code on a Resideo PROA7C?
The Resideo PROA7C's default Installer Code is 4112. The Installer Code must be used to enter programming. Click here to read about the PROA7C Installer Code.
How Do I Turn off My Honeywell Home PROA7?
To disarm the Honeywell Home PROA7, enter a valid code during entry delay or when the alarm is triggered. To power down, remove AC and battery. Learn more here.
What is the Default Master Code on a Resideo PROA7?
The default Master Code on the PROA7 is 1234. This code should be updated to a more secure one as soon as you begin using your system. Keep reading for details.
Can A Resideo PROA7 Support All Resideo CO Detectors?
No, from the box the PROA7 only supports PROSIX sensors. SiX sensors can be added along with a PROTAKEOVER to support legacy wireless. Learn about the PROA7.
How Do I Install PROWIFI / PROWIFIZW To PROA7 / PROA7C?
Power down, turn the panel over and remove the left side cover. Insert the module as indicated at the top left. Return the cover and power up. Read for details.
How Do I Install an LTE Unit To a PROA7 or PROA7PLUS?
To install an LTE module, be sure the panel is powered down and dismounted. Turn it over and remove the side cover and install the module. Click for details.
How Do I Install a Honeywell Home PROA7 or PROA7PLUS?
Mount the system to the wall or desk mount it, then program all your peripherals and activate the system. Click here to get all the details of installation.
Can I Program a 5834-4 Key Fob to a Resideo PROA7PLUS?
No, even with a PROTAKEOVER Module, the PROA7PLUS will not support the 5834-4. If you need a key fob you must use the PROSIXFOB. Click here to learn more.
Do All Resideo Smoke/Heat Detectors Work With PROA7PLUS?
Out of the box, only PROSIX Series wireless sensors will work. You can add compatibility for legacy RF devices with the PROTAKEOVER. Read here for details.
To find the firmware version of a PROA7PLUS enter the Installer Tools menu then check System Information then General Information. Click here to learn more.
Added:
What Is the Default Installer Code on a Resideo PROA7C?
The Resideo PROA7C's default Installer Code is 4112. The Installer Code must be used to enter programming. Click here to read about the PROA7C Installer Code.
Added:
How Do I Turn off My Honeywell Home PROA7?
To disarm the Honeywell Home PROA7, enter a valid code during entry delay or when the alarm is triggered. To power down, remove AC and battery. Learn more here.
Added:
What is the Default Master Code on a Resideo PROA7?
The default Master Code on the PROA7 is 1234. This code should be updated to a more secure one as soon as you begin using your system. Keep reading for details.
Added:
Can A Resideo PROA7 Support All Resideo CO Detectors?
No, from the box the PROA7 only supports PROSIX sensors. SiX sensors can be added along with a PROTAKEOVER to support legacy wireless. Learn about the PROA7.
Added:
How Do I Install PROWIFI / PROWIFIZW To PROA7 / PROA7C?
Power down, turn the panel over and remove the left side cover. Insert the module as indicated at the top left. Return the cover and power up. Read for details.
Added:
How Do I Install an LTE Unit To a PROA7 or PROA7PLUS?
To install an LTE module, be sure the panel is powered down and dismounted. Turn it over and remove the side cover and install the module. Click for details.
Added:
How Do I Install a Honeywell Home PROA7 or PROA7PLUS?
Mount the system to the wall or desk mount it, then program all your peripherals and activate the system. Click here to get all the details of installation.
Added:
Can I Program a 5834-4 Key Fob to a Resideo PROA7PLUS?
No, even with a PROTAKEOVER Module, the PROA7PLUS will not support the 5834-4. If you need a key fob you must use the PROSIXFOB. Click here to learn more.
Added:
Do All Resideo Smoke/Heat Detectors Work With PROA7PLUS?
Out of the box, only PROSIX Series wireless sensors will work. You can add compatibility for legacy RF devices with the PROTAKEOVER. Read here for details.
Added: