Honeywell VISTA-10P Frequently Asked Questions
How Do I Wire a Door or Window Contact in Series?
Wire multiple door and window sensors together by connecting them in a series circuit. Let us show you the details of how this setup is wired and how it works.
How Do I Upgrade a Honeywell VISTA P-Series System to Use LTE?
Adding an LTE communicator to a VISTA P-Series Panel will allow it to connect with an LTE network. But certain firmware requirements must be met for TC2. Learn about VISTA Panels.
How Do I Install the Resideo LTE-IA On My VISTA P-Series System?
The Resideo LTE-IA is a great dual-path communicator for a VISTA P-Series System. Make sure to test signal strength before mounting. Learn how to install the Resideo LTE-IA.
How Do I Install the Resideo LTE-IV On My VISTA P-Series System?
The Resideo LTE-IV is easy to install and use with a VISTA Series Panel. You should test signal strength before mounting to the panel. Learn how to install the Resideo LTE-IV.
How Do I Self-Monitor a VISTA P-Series System?
Self-monitoring means that all system alerts are sent to the end user via text and/or email. The VISTA-P is not connected with a monitoring station. Learn about self-monitoring.
What Does FC Stand For on My Alarm System?
An FC code indicates that a Honeywell VISTA System is having trouble communicating. This message is often displayed on a keypad when the panel previously used its built-in dialer to send signals. This error code can be cleared by most end users. Learn more about the FC code on a VISTA panel.
How Do I Clear the FC Code on my Honeywell Alarm?
An FC code on a Honeywell VISTA System stands for Failed To Communicate. This means that the panel attempted to dial out using its built-in dialer, and it did not receive acknowledgement that the signal was accepted. Learn more about clearing the FC code on a Honeywell security system.
How Do I Make My 6160RF Chime When a Zone is Opened?
Enabling the chime on a 6160RF keypad is a very easy process. However, the user will need to know the Master Code for the system to enable this feature. Once the chime has been enabled, the keypad will chime whenever a zone is faulted. Learn more about the chime feature on a 6160RF keypad.
What Panels Does a GSMX4G Radio Work With?
A GSMX4G cellular communicator is designed for use with Honeywell VISTA panels, as well as the LYNX Plus L3000 system. The GSMX4G will provide the system with a 4G cellular connection using the AT&T cellular service, and it is fully compatible with the Total Connect 2.0 service provided by AlarmNet.
How Many 5881s Can I Hook Up to My VISTA Wired Security System?
The Vista P series panels support only 1 wireless receiver. The standalone receivers come in three capacities, Low, Medium, and High. A Low receiver supports up to 8 zones, Medium supports up to 16, and High supports as many as the panel will allow. Choose your receiver based on the zones needed.
Wire multiple door and window sensors together by connecting them in a series circuit. Let us show you the details of how this setup is wired and how it works.
Added:
How Do I Upgrade a Honeywell VISTA P-Series System to Use LTE?
Adding an LTE communicator to a VISTA P-Series Panel will allow it to connect with an LTE network. But certain firmware requirements must be met for TC2. Learn about VISTA Panels.
Added:
How Do I Install the Resideo LTE-IA On My VISTA P-Series System?
The Resideo LTE-IA is a great dual-path communicator for a VISTA P-Series System. Make sure to test signal strength before mounting. Learn how to install the Resideo LTE-IA.
Added:
How Do I Install the Resideo LTE-IV On My VISTA P-Series System?
The Resideo LTE-IV is easy to install and use with a VISTA Series Panel. You should test signal strength before mounting to the panel. Learn how to install the Resideo LTE-IV.
Added:
How Do I Self-Monitor a VISTA P-Series System?
Self-monitoring means that all system alerts are sent to the end user via text and/or email. The VISTA-P is not connected with a monitoring station. Learn about self-monitoring.
Added:
What Does FC Stand For on My Alarm System?
An FC code indicates that a Honeywell VISTA System is having trouble communicating. This message is often displayed on a keypad when the panel previously used its built-in dialer to send signals. This error code can be cleared by most end users. Learn more about the FC code on a VISTA panel.
Added:
How Do I Clear the FC Code on my Honeywell Alarm?
An FC code on a Honeywell VISTA System stands for Failed To Communicate. This means that the panel attempted to dial out using its built-in dialer, and it did not receive acknowledgement that the signal was accepted. Learn more about clearing the FC code on a Honeywell security system.
Added:
How Do I Make My 6160RF Chime When a Zone is Opened?
Enabling the chime on a 6160RF keypad is a very easy process. However, the user will need to know the Master Code for the system to enable this feature. Once the chime has been enabled, the keypad will chime whenever a zone is faulted. Learn more about the chime feature on a 6160RF keypad.
Added:
What Panels Does a GSMX4G Radio Work With?
A GSMX4G cellular communicator is designed for use with Honeywell VISTA panels, as well as the LYNX Plus L3000 system. The GSMX4G will provide the system with a 4G cellular connection using the AT&T cellular service, and it is fully compatible with the Total Connect 2.0 service provided by AlarmNet.
Added:
How Many 5881s Can I Hook Up to My VISTA Wired Security System?
The Vista P series panels support only 1 wireless receiver. The standalone receivers come in three capacities, Low, Medium, and High. A Low receiver supports up to 8 zones, Medium supports up to 16, and High supports as many as the panel will allow. Choose your receiver based on the zones needed.
Added: