Resideo PROA7C Frequently Asked Questions
How Do I Quickly Configure a Honeywell Home PROSIXC2W?
First, wire the zones, then calibrate the module. Enter zone programming, then tamper the module. Complete configuration for any used zones. Read on for more.
Can I Use A Resideo IPCAM-WOC2 Without an Alarm System?
The IPCAM-WOC2 works with Total Connect 2.0 and can be used independently from an alarm system. Keep reading to learn more about using the IPCAM-WOC2 features.
How Do I Install a Honeywell Home PROA7PLUS To My Wall?
To install the ProSeries, install additional panel modules, run power and mount the backplate. Attach panel to the backplate then power on. Read on for details.
How Do I Connect a Honeywell Home PROA7PLUS to WIFI?
Enter Menu, then Settings, enter a valid code and go to WIFI Networks. Choose the proper network, enter the password, and connect. Keep reading to learn more.
How Do I Change a Master Code on a Honeywell Home PROA7?
The Honeywell Home PROA7 has one Master Code. To edit it enter Menu, Settings, User Management and entering the current Master Code. Keep reading to learn more.
Why Can't I Pair a PROWLTOUCH to a PROA7 or PROA7PLUS?
The ProSeries panel and the PROWLTOUCH find each other using a service called "Bonjour" or mDNS. Not all routers handle this well. Learn to overcome this issue.
How Do I Power Down My PROA7 Security System?
To power down the Honeywell Home PROA7 system, first, open the system and disconnect the battery. AC power will be disconnected in one of two ways. Keep reading.
How Do I Add GD00Z-8-GC Garage CNTRL to ProA7/ProA7Plus?
Note the DSK Pin, then mount the hardware. Put the panel into inclusion mode then press the Link button on the GD00Z-8-GC. Enter the Pin when prompted by the panel. Learn more.
How Do I Add a Z-Wave Lock to a Resideo PROA7C?
To pair a Z-Wave lock with a PROA7C, a PROWIFIZW is needed. User codes can be pushed from the panel to the lock for unlocking and disarming. Learn how to pair a lock for a PROA7C.
Is the Resideo PROA7C Compatible w/ All Resideo PROSIX Sensors?
The Resideo PROA7C supports all PROSIX Sensors. The system can also support SiX Sensors, plus (1) of five (5) legacy sensor frequencies if a PROTAKEOVER unit is added. Learn more.
First, wire the zones, then calibrate the module. Enter zone programming, then tamper the module. Complete configuration for any used zones. Read on for more.
Added:
Can I Use A Resideo IPCAM-WOC2 Without an Alarm System?
The IPCAM-WOC2 works with Total Connect 2.0 and can be used independently from an alarm system. Keep reading to learn more about using the IPCAM-WOC2 features.
Added:
How Do I Install a Honeywell Home PROA7PLUS To My Wall?
To install the ProSeries, install additional panel modules, run power and mount the backplate. Attach panel to the backplate then power on. Read on for details.
Added:
How Do I Connect a Honeywell Home PROA7PLUS to WIFI?
Enter Menu, then Settings, enter a valid code and go to WIFI Networks. Choose the proper network, enter the password, and connect. Keep reading to learn more.
Added:
How Do I Change a Master Code on a Honeywell Home PROA7?
The Honeywell Home PROA7 has one Master Code. To edit it enter Menu, Settings, User Management and entering the current Master Code. Keep reading to learn more.
Added:
Why Can't I Pair a PROWLTOUCH to a PROA7 or PROA7PLUS?
The ProSeries panel and the PROWLTOUCH find each other using a service called "Bonjour" or mDNS. Not all routers handle this well. Learn to overcome this issue.
Added:
How Do I Power Down My PROA7 Security System?
To power down the Honeywell Home PROA7 system, first, open the system and disconnect the battery. AC power will be disconnected in one of two ways. Keep reading.
Added:
How Do I Add GD00Z-8-GC Garage CNTRL to ProA7/ProA7Plus?
Note the DSK Pin, then mount the hardware. Put the panel into inclusion mode then press the Link button on the GD00Z-8-GC. Enter the Pin when prompted by the panel. Learn more.
Added:
How Do I Add a Z-Wave Lock to a Resideo PROA7C?
To pair a Z-Wave lock with a PROA7C, a PROWIFIZW is needed. User codes can be pushed from the panel to the lock for unlocking and disarming. Learn how to pair a lock for a PROA7C.
Added:
Is the Resideo PROA7C Compatible w/ All Resideo PROSIX Sensors?
The Resideo PROA7C supports all PROSIX Sensors. The system can also support SiX Sensors, plus (1) of five (5) legacy sensor frequencies if a PROTAKEOVER unit is added. Learn more.
Added: