Qolsys TSB #241218 - Qolsys IQ Panel 4/IQ4 Hub/IQ4 NS Firmware Update - 4.5.2 Dated 12/18/24
Related Products
Document Transcript
TSB #:
241218
DATE:
12/18/24
RE:
IQ Panel 4/IQ4 HUB/IQ4 NS - 4.5.2 SOFTWARE UPDATE
RELEASE NOTES & UPDATE INSTRUCTIONS
Release Notes:
Fixes/Improvements:
•
Corrected an issue where PowerG PIR Cameras may drain their batteries prematurely (
TSB #241014
)
Update Instructions:
Compatibility Note: Your IQ Panel must be on software version 4.4.0 or higher and connected to WiFi to install
this updated wirelessly.
For any Panels below 4.4.0 – please review the software update instructions located at
SOFTWARE DOWNLOADS - Qolsys
1- Swipe down from the top of the screen and touch “Settings"
2- Touch “Advanced Settings”
3- Enter a valid installer code (default is 1111)
4- Touch "Upgrade Software"
5 -Touch “Patch Tag” and enter the patch
iqpanel4.5.2
then touch OK
6- Touch "Upgrade Using Network" (Panel must be connected to Wi-Fi).
Update will download and install
7- Once complete touch "OK" to reboot the Panel.
DO NOT TOUCH THE SCREEN.
The update process will take
approximately 5 minutes. After the Panel reboots the home screen will appear and the LED will turn green.
TECHNICAL SERVICE BULLETIN
IQ Panel 4/IQ4 HUB/IQ4 NS - 4.5.2 SOFTWARE UPDATE - RELEASE NOTES
- Uploaded