Frequently Asked Questions
How Do I Program a SiXSMOKE to a Lyric Gateway?
Since the Lyric Gateway doesn't provide access to user programming, you must contact your alarm monitoring company to program a SiXSmoke sensor to the device.
What Field is Device Programming on a VISTA-21iP?
There is no single device programming field on the 21iP. Device programming refers to any device connected to the keypad bus. Learn about device programming.
Honeywell IS-3035 vs DT8035 Motion Detector?
The difference between the IS-3035 motion and the DT-8035 motion is that the DT-8035 uses PIR and microwave to detect motion. Learn about the two devices.
How do I program a SiXSIREN to a Lyric Gateway?
To program a SiXSIREN to a Gateway, your alarm monitoring company needs to access it and enable learn mode. Learn how to learn the device into the system.
How do I program a SiXSIREN to a Lyric Security System?
The recommended method of programming a SiXSIREN to a Lyric Security System is by learning in the device through system programming. Learn how to do this.
How do I program a SiXGB to a Lyric Gateway?
The SiXGB can be programmed to the Lyric Gateway with the help of an alarm monitoring company. Learn why this is, and how to program the SiXGB to the system.
How Do I Add a 2nd Zone Expander to a VISTA-20P?
The Honeywell 4219 needs to be wired up, and have its dip switches properly configured to work with a VISTA-20P. Learn how to setup a second 4219 zone expander.
What Does the Reset/WPS Button On a Honeywell ACU Do?
The Reset button on the Honeywell ACU can perform a factory default, or it can be used to join the ACU to a WIFI network via WPS. Learn about the Reset button.
How Long Does the Battery Last on an L5200 Before Power Loss?
The L5200 comes with a standard capacity battery that lasts up to four hours when AC power is lost. Continue reading to learn about higher capacity batteries.
How Do I Join My ACU to WIFI Using WPS?
To join the ACU to WIFI, begin pairing on the router or WAP, then press "Reset" and release it. "Reset" acts as the WPS button during this process. Read on.
Since the Lyric Gateway doesn't provide access to user programming, you must contact your alarm monitoring company to program a SiXSmoke sensor to the device.
Added:
What Field is Device Programming on a VISTA-21iP?
There is no single device programming field on the 21iP. Device programming refers to any device connected to the keypad bus. Learn about device programming.
Added:
Honeywell IS-3035 vs DT8035 Motion Detector?
The difference between the IS-3035 motion and the DT-8035 motion is that the DT-8035 uses PIR and microwave to detect motion. Learn about the two devices.
Added:
How do I program a SiXSIREN to a Lyric Gateway?
To program a SiXSIREN to a Gateway, your alarm monitoring company needs to access it and enable learn mode. Learn how to learn the device into the system.
Added:
How do I program a SiXSIREN to a Lyric Security System?
The recommended method of programming a SiXSIREN to a Lyric Security System is by learning in the device through system programming. Learn how to do this.
Added:
How do I program a SiXGB to a Lyric Gateway?
The SiXGB can be programmed to the Lyric Gateway with the help of an alarm monitoring company. Learn why this is, and how to program the SiXGB to the system.
Added:
How Do I Add a 2nd Zone Expander to a VISTA-20P?
The Honeywell 4219 needs to be wired up, and have its dip switches properly configured to work with a VISTA-20P. Learn how to setup a second 4219 zone expander.
Added:
What Does the Reset/WPS Button On a Honeywell ACU Do?
The Reset button on the Honeywell ACU can perform a factory default, or it can be used to join the ACU to a WIFI network via WPS. Learn about the Reset button.
Added:
How Long Does the Battery Last on an L5200 Before Power Loss?
The L5200 comes with a standard capacity battery that lasts up to four hours when AC power is lost. Continue reading to learn about higher capacity batteries.
Added:
How Do I Join My ACU to WIFI Using WPS?
To join the ACU to WIFI, begin pairing on the router or WAP, then press "Reset" and release it. "Reset" acts as the WPS button during this process. Read on.
Added: