Frequently Asked Questions
How Do I Get into Programming on My Honeywell LYNX Touch?
The programming menu on a Honeywell LYNX Touch can be found within the panel's security menu. You will need to know your installer code to access the menu.
Can External Antenna be Installed on an iGSMV4G?
An external antenna can be installed into an iGSMV4G. The communicator's internal antenna must be removed, and a K14207LF adapter will needed for the install.
How Do I Add a Honeywell Siren to a 2GIG GC3?
The 2GIG GC3 panel can have a Honeywell hard-wired siren installed directly to its circuit board. A siren can also be connected through a hard-wired relay.
How do you add a 2GIG PIR1-345 to the 2GIG GC3?
The 2GIG PIR1-345 can be added to the 2GIG GC3 security panel through system programming. You will need the installer code to access system programming.
How do you add a 2GIG PAD1-345 to the 2GIG GC3?
The 2GIG PAD1-345 wireless keypad can be added to the 2GIG GC3 through the systems keypad programming. Learn how to add a 2GIG PAD1-345 to the GC3 system.
Can You Turn Off the Siren on a 2GIG GC3?
The 2GIG GC3 internal siren cannot be turned off in programming. However, the internal siren can be disabled by unplugging it from the system's main board.
How Do You Add a 2GIG SMKT2-345 to the 2GIG GC3?
A 2GIG SMKT2-345 can be added to a 2GIG GC3 security system through system programming. You will need the installer code for the system to access this menu.
How Can I Connect Wirelessly to a 2GIG GC3 with an iPad?
An iPad can connect wirelessly to a 2GIG GC3 system with the downloadable Alarm.com app. Learn how to configure Alarm.com on a GC3 alarm and automation system.
How Do You Add a 2GIG DW10 to the 2GIG GC3?
A DW10 door and window sensor can be added to the 2GIG GC3 through the system's programming menu. The installer code is needed to access the programming menu.
How Do I Remove A Z-Wave Device From A 2GIG GC3?
Z-Wave devices are removed from a 2GIG GC3 system through the Smart Home Settings menu. You must put the GC3 into exclusion mode to remove Z-Wave devices.
The programming menu on a Honeywell LYNX Touch can be found within the panel's security menu. You will need to know your installer code to access the menu.
Added:
Can External Antenna be Installed on an iGSMV4G?
An external antenna can be installed into an iGSMV4G. The communicator's internal antenna must be removed, and a K14207LF adapter will needed for the install.
Added:
How Do I Add a Honeywell Siren to a 2GIG GC3?
The 2GIG GC3 panel can have a Honeywell hard-wired siren installed directly to its circuit board. A siren can also be connected through a hard-wired relay.
Added:
How do you add a 2GIG PIR1-345 to the 2GIG GC3?
The 2GIG PIR1-345 can be added to the 2GIG GC3 security panel through system programming. You will need the installer code to access system programming.
Added:
How do you add a 2GIG PAD1-345 to the 2GIG GC3?
The 2GIG PAD1-345 wireless keypad can be added to the 2GIG GC3 through the systems keypad programming. Learn how to add a 2GIG PAD1-345 to the GC3 system.
Added:
Can You Turn Off the Siren on a 2GIG GC3?
The 2GIG GC3 internal siren cannot be turned off in programming. However, the internal siren can be disabled by unplugging it from the system's main board.
Added:
How Do You Add a 2GIG SMKT2-345 to the 2GIG GC3?
A 2GIG SMKT2-345 can be added to a 2GIG GC3 security system through system programming. You will need the installer code for the system to access this menu.
Added:
How Can I Connect Wirelessly to a 2GIG GC3 with an iPad?
An iPad can connect wirelessly to a 2GIG GC3 system with the downloadable Alarm.com app. Learn how to configure Alarm.com on a GC3 alarm and automation system.
Added:
How Do You Add a 2GIG DW10 to the 2GIG GC3?
A DW10 door and window sensor can be added to the 2GIG GC3 through the system's programming menu. The installer code is needed to access the programming menu.
Added:
How Do I Remove A Z-Wave Device From A 2GIG GC3?
Z-Wave devices are removed from a 2GIG GC3 system through the Smart Home Settings menu. You must put the GC3 into exclusion mode to remove Z-Wave devices.
Added: