2GIG GC3e Frequently Asked Questions
How Do I Delete a Defective Z-Wave Device Locally at the 2GIG GC3 or GC3e?
If you find that there is a failed Z-Wave device on your GC3 or GC3e, then you may want to delete it. Learn how to delete a defective Z-Wave device locally at the GC3 or GC3e.
How Do I Set Up a Cellular Communicator in a 2GIG GC3e?
Adding a cellular communicator to your 2GIG GC3e will allow you to activate the system for monitoring service. Learn how to add a cellular communicator to your 2GIG GC3e System.
How Do I Properly Replace a Bad Sensor On My GC3 or GC3e?
To replace a sensor on a 2GIG GC3 or GC3e, you must fully clear the zone from programming. Then you must re-program the entire zone. Learn to replace a sensor for a GC3 or GC3e.
Why am I Getting Supervision Trouble on My 2GIG eSeries Sensor?
If a 2GIG eSeries Sensor is taken out of wireless range and/or programmed with an incorrect Equipment Code, then supervision trouble will occur. Learn about 2GIG eSeries Sensors.
How Do I Clear a Trouble Message on a 2GIG GC3 or 2GIG GC3e?
When a 2GIG GC3 or GC3e shows a trouble condition, you must correct the problem causing the trouble. The trouble should clear once the issue is fixed. Learn to clear a trouble.
How Do I Connect a 2GIG GC3e to WIFI?
The 2GIG GC3e has a built-in WIFI card for connecting to a WIFI network. The GC3e must still be set up with a cellular radio for connectivity with Alarm.com. Learn about the GC3e.
Can I Connect a 2GIG GC3e to Apple HomeKit?
Apple HomeKit will not recognize a 2GIG GC3e Security System. You cannot control a GC3e through HomeKit or Siri voice commands. Learn about HomeKit and the 2GIG GC3e.
Can I Use a Honeywell 5828 With a 2GIG GC3e?
The 5828 Keypad interfaces with a panel using a specific House ID setting that the GC3e does not support. This makes the 5828 and the GC3e incompatible. Learn more about the 5828.
How Do I Program a Key Fob Into a 2GIG GC3e?
The 2GIG GC3e has a Key Fobs Menu for enrolling new key fob devices. Up to 32 key fobs can be enrolled with the panel. Learn how to pair a key fob with a 2GIG GC3e.
How Do I Add or Change User Codes on a 2GIG GC3e?
The 2GIG GC3e Security System allows you to program up to 100 different user codes. A duress code can also be programmed. Learn how to add or change GC3e user codes.
If you find that there is a failed Z-Wave device on your GC3 or GC3e, then you may want to delete it. Learn how to delete a defective Z-Wave device locally at the GC3 or GC3e.
Added:
How Do I Set Up a Cellular Communicator in a 2GIG GC3e?
Adding a cellular communicator to your 2GIG GC3e will allow you to activate the system for monitoring service. Learn how to add a cellular communicator to your 2GIG GC3e System.
Added:
How Do I Properly Replace a Bad Sensor On My GC3 or GC3e?
To replace a sensor on a 2GIG GC3 or GC3e, you must fully clear the zone from programming. Then you must re-program the entire zone. Learn to replace a sensor for a GC3 or GC3e.
Added:
Why am I Getting Supervision Trouble on My 2GIG eSeries Sensor?
If a 2GIG eSeries Sensor is taken out of wireless range and/or programmed with an incorrect Equipment Code, then supervision trouble will occur. Learn about 2GIG eSeries Sensors.
Added:
How Do I Clear a Trouble Message on a 2GIG GC3 or 2GIG GC3e?
When a 2GIG GC3 or GC3e shows a trouble condition, you must correct the problem causing the trouble. The trouble should clear once the issue is fixed. Learn to clear a trouble.
Added:
How Do I Connect a 2GIG GC3e to WIFI?
The 2GIG GC3e has a built-in WIFI card for connecting to a WIFI network. The GC3e must still be set up with a cellular radio for connectivity with Alarm.com. Learn about the GC3e.
Added:
Can I Connect a 2GIG GC3e to Apple HomeKit?
Apple HomeKit will not recognize a 2GIG GC3e Security System. You cannot control a GC3e through HomeKit or Siri voice commands. Learn about HomeKit and the 2GIG GC3e.
Added:
Can I Use a Honeywell 5828 With a 2GIG GC3e?
The 5828 Keypad interfaces with a panel using a specific House ID setting that the GC3e does not support. This makes the 5828 and the GC3e incompatible. Learn more about the 5828.
Added:
How Do I Program a Key Fob Into a 2GIG GC3e?
The 2GIG GC3e has a Key Fobs Menu for enrolling new key fob devices. Up to 32 key fobs can be enrolled with the panel. Learn how to pair a key fob with a 2GIG GC3e.
Added:
How Do I Add or Change User Codes on a 2GIG GC3e?
The 2GIG GC3e Security System allows you to program up to 100 different user codes. A duress code can also be programmed. Learn how to add or change GC3e user codes.
Added: