Honeywell Home PROWIFI Frequently Asked Questions
How Do I Install PROWIFI / PROWIFIZW To PROA7 / PROA7C?
Power down, turn the panel over and remove the left side cover. Insert the module as indicated at the top left. Return the cover and power up. Read for details.
How Do I Connect an LTEM-PA/LTEM-PV With Cell to WIFI?
To connect an LTEM-PA or LTEM-PV communicator to WIFI, first install a WIFI module. Then use the Total Connect 2.0 app to configure. Keep reading to learn how.
Are Special Firewall Settings Needed for LTEM-P and PRO Comms?
If your firewall is not allowing the correct data through, there are special settings you must enable. Continue reading to learn how and when to allow access.
How Do I Connect an LTEM-PA/LTEM-PV Without Cell to WIFI?
To connect an LTEM-PA or LTEM-PV communicator to WIFI, first install a WIFI module. Then use the Total Connect 2.0 app to configure. Keep reading to learn how.
How Do I Create a Scene in Total Connect 2.0 via Website?
Create a scene on the Total Connect 2.0 website by logging in and going to the scenes tab. Come learn as we explain in this guide all the details involved.
How Do I Rename A Z-Wave device on a PROA7 or PROA7PLUS?
On a PROA7 or PROA7PLUS, you can rename your enrolled Z-Wave devices in the "Devices" menu. Let us show you how to rename them and make them easier to identify.
Why Did They Switch Batteries on the Resideo ProSeries?
They switched batteries on the Pro Series panels, because of supply chain issues. Once the proper battery was available, it was used. Keep reading for more.
How Do I Change the Date/Time On a PROA7 or PROA7PLUS?
With a PROA7 or PROA7PLUS, the clock can be set by itself. If used in local mode, the time cannot be set. For an accurate clock, we will show what's required.
How Do I Disarm a PROA7 or PROA7PLUS Using a PROWLTOUCH?
Disarming a PROA7 or PROA7PLUS using a PROWLTOUCH keypad is simple. Press Disarm, then enter a valid code. Keep reading to learn how to disarm these panels.
How Do I Install the PROWIFIZW in a LTEM-PA or LTEM-PV?
The PROWIFIZW is installed in the LTEM-P Series radio by powering the radio down, plugging the module in, then powering back up. For full info, keep reading.
Power down, turn the panel over and remove the left side cover. Insert the module as indicated at the top left. Return the cover and power up. Read for details.
Added:
How Do I Connect an LTEM-PA/LTEM-PV With Cell to WIFI?
To connect an LTEM-PA or LTEM-PV communicator to WIFI, first install a WIFI module. Then use the Total Connect 2.0 app to configure. Keep reading to learn how.
Added:
Are Special Firewall Settings Needed for LTEM-P and PRO Comms?
If your firewall is not allowing the correct data through, there are special settings you must enable. Continue reading to learn how and when to allow access.
Added:
How Do I Connect an LTEM-PA/LTEM-PV Without Cell to WIFI?
To connect an LTEM-PA or LTEM-PV communicator to WIFI, first install a WIFI module. Then use the Total Connect 2.0 app to configure. Keep reading to learn how.
Added:
How Do I Create a Scene in Total Connect 2.0 via Website?
Create a scene on the Total Connect 2.0 website by logging in and going to the scenes tab. Come learn as we explain in this guide all the details involved.
Added:
How Do I Rename A Z-Wave device on a PROA7 or PROA7PLUS?
On a PROA7 or PROA7PLUS, you can rename your enrolled Z-Wave devices in the "Devices" menu. Let us show you how to rename them and make them easier to identify.
Added:
Why Did They Switch Batteries on the Resideo ProSeries?
They switched batteries on the Pro Series panels, because of supply chain issues. Once the proper battery was available, it was used. Keep reading for more.
Added:
How Do I Change the Date/Time On a PROA7 or PROA7PLUS?
With a PROA7 or PROA7PLUS, the clock can be set by itself. If used in local mode, the time cannot be set. For an accurate clock, we will show what's required.
Added:
How Do I Disarm a PROA7 or PROA7PLUS Using a PROWLTOUCH?
Disarming a PROA7 or PROA7PLUS using a PROWLTOUCH keypad is simple. Press Disarm, then enter a valid code. Keep reading to learn how to disarm these panels.
Added:
How Do I Install the PROWIFIZW in a LTEM-PA or LTEM-PV?
The PROWIFIZW is installed in the LTEM-P Series radio by powering the radio down, plugging the module in, then powering back up. For full info, keep reading.
Added: