Honeywell VISTA-20PSIA Frequently Asked Questions
How do I Set up a Honeywell 6160RF?
The 6160RF must be connected to the alarm panel, then properly addressed in order to work. Continue reading and learn how to set up the 6160RF keypad receiver.
How Do I Perform a Transmitter Sniffer Test on a Vista Panel?
Enter Installer Code + [#] + [3] to begin the transmitter sniffer test. The system must be ready, with no faults or bypasses, in order to enter this mode.
What is an 803 Signal on a VISTA Panel?
When an AlarmNet device on a Vista panel indicates a trouble condition for itself, it uses zone 803, to prevent confusion with a protection zone. Read on!
What Software Lets Me Make Changes on My VISTA 20P?
Users can make changes on a VISTA using Total Connect 2.0, or by hand programming it. A monitored alarm company who's a Honeywell dealer uses Compass. Read on.
Where Should I Install My Honeywell 5869 Panic Button?
Install the Honeywell 5869 Wireless Panic Button in a hidden but reachable place, away from metal, furniture, and appliances. Learn how to install a 5869.
Can a VISTA Security System Use 2 Wireless Receivers?
The number of receivers supported by a Vista panel depends on the panel used, as well as other factors. Find out how many wireless receivers are supported.
Honeywell 5806W3 vs 5808W3
The Honeywell 5808W3 is a wireless Photoelectric Smoke with a built-in heat detector. The 5806W3 is a wireless Photoelectric Smoke only. Find out more!
Can an End of Line Relay Cause Power Failure on a Zone?
End of Line relays are used on 4-wire smoke zones to alert the end-user if the smokes experience power loss, but wouldn’t cause a power failure. Read on!
Can I Wire a 6150 to an AUX Power Supply?
A 6150 can be wired to a power supply if connecting to the panel’s power output requires too much current. Learn how to connect a 6150 to an AUX Power Supply.
Can VISTA Systems Use the 6160RF and Wireless Receivers?
Vista panels support hardwired and wireless expansion. Receivers can be stand alone, or built into a keypad. Learn about using the 6160RF with a Vista System.
The 6160RF must be connected to the alarm panel, then properly addressed in order to work. Continue reading and learn how to set up the 6160RF keypad receiver.
Added:
How Do I Perform a Transmitter Sniffer Test on a Vista Panel?
Enter Installer Code + [#] + [3] to begin the transmitter sniffer test. The system must be ready, with no faults or bypasses, in order to enter this mode.
Added:
What is an 803 Signal on a VISTA Panel?
When an AlarmNet device on a Vista panel indicates a trouble condition for itself, it uses zone 803, to prevent confusion with a protection zone. Read on!
Added:
What Software Lets Me Make Changes on My VISTA 20P?
Users can make changes on a VISTA using Total Connect 2.0, or by hand programming it. A monitored alarm company who's a Honeywell dealer uses Compass. Read on.
Added:
Where Should I Install My Honeywell 5869 Panic Button?
Install the Honeywell 5869 Wireless Panic Button in a hidden but reachable place, away from metal, furniture, and appliances. Learn how to install a 5869.
Added:
Can a VISTA Security System Use 2 Wireless Receivers?
The number of receivers supported by a Vista panel depends on the panel used, as well as other factors. Find out how many wireless receivers are supported.
Added:
Honeywell 5806W3 vs 5808W3
The Honeywell 5808W3 is a wireless Photoelectric Smoke with a built-in heat detector. The 5806W3 is a wireless Photoelectric Smoke only. Find out more!
Added:
Can an End of Line Relay Cause Power Failure on a Zone?
End of Line relays are used on 4-wire smoke zones to alert the end-user if the smokes experience power loss, but wouldn’t cause a power failure. Read on!
Added:
Can I Wire a 6150 to an AUX Power Supply?
A 6150 can be wired to a power supply if connecting to the panel’s power output requires too much current. Learn how to connect a 6150 to an AUX Power Supply.
Added:
Can VISTA Systems Use the 6160RF and Wireless Receivers?
Vista panels support hardwired and wireless expansion. Receivers can be stand alone, or built into a keypad. Learn about using the 6160RF with a Vista System.
Added: