Qolsys IQ Panel 2 Plus 319.5 MHz AT&T-LTE 10-1 System Kit Frequently Asked Questions
Which Deadbolt Lock Is Compatible w/ a Qolsys IQ Panel 2?
A select set of Z-Wave door locks will work with the IQ Panel 2. The lock can be controlled from the panel itself or from the Alarm.com service. Any valid system user code can be used to unlock the lock after it has been programmed. Learn more about using Z-Wave locks with an IQ Panel 2.
Can I Use More than One Keypad On a Qolsys IQ Panel 2?
The Qolsys IQ Panel 2 is compatible with the Qolsys IQ Remote. This device serves as a secondary touchscreen controller for the IQ Panel 2. Up to three different IQ Remote devices can be paired with a single IQ Panel 2 System, to provide four on-site access points. Learn more about the IQ Remote.
Can I Connect an iPhone to a Qolsys IQ Panel 2?
An iPhone can connect with a IQ Panel 2 using the Alarm.com interactive service. Alarm.com offers a mobile app that allows iOS devices to operate an alarm system. This service can be conveniently accessed at any time to control an IQ Panel 2. Learn how to use an iPhone with an IQ Panel 2.
Can I Turn Off the Siren On a Qolsys IQ Panel 2?
The siren for an IQ Panel 2 can be disabled from system programming. The option is found under Siren and Alarms. You must know the Installer or Dealer Code to access this menu. There's also an option for temporarily disabling the siren for testing. Learn more about the siren on an IQ Panel 2.
How Do I Add Wireless Sensors to a Qolsys IQ Panel 2?
A wireless sensor can be added to a IQ Panel 2 by putting the system into learn mode and then activating the sensor. The settings for the sensor can then be adjusted as needed. You must know the system's Installer or Dealer Code to do this. Find out how to enroll a sensor with the IQ Panel 2.
Does a Qolsys IQ Panel 2 Chime When Doors are Opened?
The Qolsys IQ Panel 2 can be programmed to chime when doors are opened. The chime settings are adjusted from the programming menu. Chimes can be enabled or disabled for individual sensors, or the system chime can be disabled entirely. Learn more about the chime function on the IQ Panel 2.
How Do I Remove a Z-Wave Device from a Qolsys IQ Panel 2?
To remove a Z-Wave device from a Qolsys IQ Panel 2, first, activate exclusion mode on the system. Then activate the inclusion function on the Z-Wave device. The system should recognize the device and clear it from the network. Learn how to remove Z-Wave devices from the Qolsys IQ Panel 2.
How Do I Add an IQ Motion to a Qolsys IQ Panel 2?
An IQ Motion can be added to a Qolsys IQ Panel 2 by putting the system into its auto-learn mode for enrolling new sensors and then activating the IQ Motion. The sensor will then be added to the system, and its settings can be configured. Find out how to add an IQ Motion to a Qolsys IQ Panel 2.
Can I Use a Qolsys IQ Panel 2 w/o Monitoring?
A Qolsys IQ Panel 2 can technically be used and operated without active monitoring service. But this will severely limit the functionality of the panel. The system will have no way of sending signals to a central monitoring station or to an end user. Learn more about the Qolsys IQ Panel 2.
Is the Qolsys IQ Panel 2 Compatible w/ Total Connect?
The Qolsys IQ Panel 2 cannot work with the Total Connect service. Total Connect is designed exclusively for use with Honeywell Alarm Systems. But the IQ Panel can be used with Alarm.com, a service that offers similar functionality and features. Learn more about the Qolsys IQ Panel 2.
A select set of Z-Wave door locks will work with the IQ Panel 2. The lock can be controlled from the panel itself or from the Alarm.com service. Any valid system user code can be used to unlock the lock after it has been programmed. Learn more about using Z-Wave locks with an IQ Panel 2.
Added:
Can I Use More than One Keypad On a Qolsys IQ Panel 2?
The Qolsys IQ Panel 2 is compatible with the Qolsys IQ Remote. This device serves as a secondary touchscreen controller for the IQ Panel 2. Up to three different IQ Remote devices can be paired with a single IQ Panel 2 System, to provide four on-site access points. Learn more about the IQ Remote.
Added:
Can I Connect an iPhone to a Qolsys IQ Panel 2?
An iPhone can connect with a IQ Panel 2 using the Alarm.com interactive service. Alarm.com offers a mobile app that allows iOS devices to operate an alarm system. This service can be conveniently accessed at any time to control an IQ Panel 2. Learn how to use an iPhone with an IQ Panel 2.
Added:
Can I Turn Off the Siren On a Qolsys IQ Panel 2?
The siren for an IQ Panel 2 can be disabled from system programming. The option is found under Siren and Alarms. You must know the Installer or Dealer Code to access this menu. There's also an option for temporarily disabling the siren for testing. Learn more about the siren on an IQ Panel 2.
Added:
How Do I Add Wireless Sensors to a Qolsys IQ Panel 2?
A wireless sensor can be added to a IQ Panel 2 by putting the system into learn mode and then activating the sensor. The settings for the sensor can then be adjusted as needed. You must know the system's Installer or Dealer Code to do this. Find out how to enroll a sensor with the IQ Panel 2.
Added:
Does a Qolsys IQ Panel 2 Chime When Doors are Opened?
The Qolsys IQ Panel 2 can be programmed to chime when doors are opened. The chime settings are adjusted from the programming menu. Chimes can be enabled or disabled for individual sensors, or the system chime can be disabled entirely. Learn more about the chime function on the IQ Panel 2.
Added:
How Do I Remove a Z-Wave Device from a Qolsys IQ Panel 2?
To remove a Z-Wave device from a Qolsys IQ Panel 2, first, activate exclusion mode on the system. Then activate the inclusion function on the Z-Wave device. The system should recognize the device and clear it from the network. Learn how to remove Z-Wave devices from the Qolsys IQ Panel 2.
Added:
How Do I Add an IQ Motion to a Qolsys IQ Panel 2?
An IQ Motion can be added to a Qolsys IQ Panel 2 by putting the system into its auto-learn mode for enrolling new sensors and then activating the IQ Motion. The sensor will then be added to the system, and its settings can be configured. Find out how to add an IQ Motion to a Qolsys IQ Panel 2.
Added:
Can I Use a Qolsys IQ Panel 2 w/o Monitoring?
A Qolsys IQ Panel 2 can technically be used and operated without active monitoring service. But this will severely limit the functionality of the panel. The system will have no way of sending signals to a central monitoring station or to an end user. Learn more about the Qolsys IQ Panel 2.
Added:
Is the Qolsys IQ Panel 2 Compatible w/ Total Connect?
The Qolsys IQ Panel 2 cannot work with the Total Connect service. Total Connect is designed exclusively for use with Honeywell Alarm Systems. But the IQ Panel can be used with Alarm.com, a service that offers similar functionality and features. Learn more about the Qolsys IQ Panel 2.
Added: