Alarm.com SkyBell Doorbell Camera Gets New Firmware Update
Posted By Michael GorisAlarm.com has announced that there is a new update for the Alarm.com Round SkyBell Security Doorbell Camera. This is known as the ADC-VDB101 for the "Satin Nickel" finish, and the ADC-VDB102 for the "Oil-Rubbed Bronze" finish. The update can be pushed down by your monitoring company.
The new Alarm.com SkyBell update is known as Version 5039. According to Alarm.com, the new update fixes a bug that caused the indoor chime for the doorbell camera to not ring when the ambient temperature dropped below a certain point. It was also possible that the SkyBell would perform an unusual ringing pattern if the temperature dropped too low. Another resolved issue caused the SkyBell device to not upload video clips to the Alarm.com servers until the device was rebooted. Alarm.com says that these issues should be resolved with the new update.
Remember that this update is only for the round Alarm.com SkyBell Doorbell Camera. If you have the rectangular "slim-line" model, also known as the Alarm.com ADC-VDB105 or ADC-VBD106, then this update does not apply to you. In order to receive the update, you must have your Alarm.com ADC-VDB101 or ADC-VDB102 powered on and connected with the Alarm.com servers. You can then have your monitoring company push down an update. We advice contacting your monitoring company to have the update pushed down as soon as possible.
If you are monitored by Alarm Grid, then we recommend emailing us at support@alarmgrid.com at your earliest convenience. Just let us know that you want the latest update for your Alarm.com SkyBell, and we'll take care of the rest. There is no charge to receive the update, but keep in mind that the update will not go through if the device is offline. Make sure your WIFI is running and that the device is powered on. Also remember that we only check our email from 9am to 8pm ET M-F. Please also email us if you have any questions. We look forward to hearing from you!
Update: It turns out that this is update will be pushed down automatically by Alarm.com, and no action is required on the part of the customer. Once the update is available, dealers as well as end-users will also be able to manually request the update through the dealer portal, or the customer website.