August 2020 Archives

Alarm Grid is here with another video recap. We're got some informative videos to help you set up and use your security system. Remember to subscribe to our YouTube channel and stay tuned for future videos and other great content. Let's check out the latest tutorial videos from Alarm Grid.

Program SiXPIR to Lyric Controller

I show you how to program a Honeywell SiXPIR with a Honeywell Lyric Alarm System. The Honeywell SiXPIR is a wireless motion detection sensor designed exclusively for use with the Lyric Security System. The sensor responds to changes in infrared energy caused by movement. The SiXPIR has a maximum coverage area of (40) by (56) feet when mounted from a recommended height of (7.5) feet. It supports pet immunity for small animals weighing up to (80) pounds.

Enroll DSC PG9303 to IQ Panel 2 Plus

I show you the process for manually enrolling the DSC PG9303 PowerG Door and Window Contact Sensor with the Qolsys IQ Panel 2 Plus. Manual enrollment refers to the practice of manually entering in the sensor's Serial Number, rather than allowing it to automatically generate through auto-enrollment. Manual enrollment is recommended for the PG9303 if auto-enrollment fails. After manually enrolling, you must activate the sensor's tamper cover to complete the enrollment process. Activating the tamper cover confirms the encryption key that is shared between the sensor and the panel.

We have learned that Alarm.com is planning to release new updates for their Android and iOS mobile apps. The new updates will make it easier to access your Alarm.com Video Doorbell Camera from your phone. General stability fixes and improvements will also be included in the updates.

The new Alarm.com Mobile App versions are Android Version 4.14.2 and iOS Version 4.15. These new versions include doorbell camera support to the Home Screen Quick Actions Option. This option is configurable through the App Settings Menu. When properly configured, you will be able to access the live feed for your video doorbell with a single, long press of the Alarm.com App icon.

As we have learned from prior experiences, Alarm.com usually has a bit of a delay between announcing their new app updates and them actually being available in the Google Play Store and the Apple App Store. Don't fret if you don't see them right away. In fact, we don't expect them to appear until the start of September at the earliest. Our best estimate is that they will be made available in the first or second week of September, but it really depends on how quickly Alarm.com gets the bell rolling.

All Alarm.com users are encouraged to download the latest versions when available, as they should also include general stability fixes and improvements to provide a better user experience overall. Keep an eye out for them in the next couple of weeks. If you have any questions about the Alarm.com Mobile App, or if you are interested in starting monitoring service for access to Alarm.com, reach out to us by emailing support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

We have some good news from the folks planning ISC West 2020, as it appears they are right on-track for the all-virtual event scheduled for October 5th through 7th. Alarm Grid is eagerly awaiting the virtual event to get the latest happenings in the always exciting security industry.

According to ISC West organizers, the all-virtual event will include keynote speakers, education from SIA experts (Security Industry Association), vendor product training sessions and demonstrations, exhibitor tech center offerings, networking events for socialization, and more. It appears that the ISC West organizers are planning to do everything within their power to make this year's event memorable and worthwhile.

While we are disappointed that the in-person event in Las Vegas, NV ultimately had to be cancelled due to ongoing pandemic concerns, we understand that the health and safety of organizers, vendors, and attendees comes first. The Alarm Grid team will be embracing the all-virtual event, and we hope to get as much out of it as possible. This isn't just for us as security professionals. We also plan to keep security enthusiasts and DIYers informed about ongoing happenings in this constantly changing industry.

Mark the dates of Monday October 5th through Wednesday October 7th for virtual ISC West 2020 coverage! We are sure to have some exciting news to share. If you have any questions about ISC West 2020, or if you are interested in learning more about Alarm Grid monitoring service, send an email to our team at support@alarmgrid.com. We're here to check your incoming emails from 9am to 8pm ET M-F. We look forward to hearing from you!

While checking out Firmware Version 2.5.3 for the Qolsys IQ Panel 2 Plus, we came across the Smart Energy Optimizer feature, and we figured we'd take a closer look. From what we can tell, this feature looks to be a nice way to set up automation rules for lighting devices right from the IQ2.

As you can see from the above picture, the option is found conveniently within the Settings Menu for the system. Simply click on the small grey bar at the top of the screen, and then choose Settings. You should see the Smart Energy Optimizer option with the Tree icon in the bottom-left corner. In order to enter this menu, you must have at least one compatible Z-Wave device enrolled with the system. If you try to enter the menu without a Z-Wave device being enrolled, then you will not gain access.

Once you are in the menu, you can set compatible lights to turn ON/OFF or to DIM to a set level during peak hours that you can set on the panel. You can set both the month and the hour of the day when "peak" consumption goes into effect for energy savings. You can also choose whether the automatic adjustments will only be applied to weekends (Saturday and Sunday). It's all customizable. We're sure Qolsys is going to continue developing this feature.

Based on the settings we have shown above, our light is set to automatically DIM to a 52% level between the months of June to September, during the hours of 2pm to 5pm, with the weekends set as the peak. Of course, you can set your compatible light or dimmer switch however you want. The time setting is expressed in 24-hour "military time", so keep that in mind when setting your values. For our testing, we used the Qolsys IQ Dimmer. The dimmer level bar is a bit flimsy and difficult to adjust, so we're hoping Qolsys makes it a bit easier to control in a future update. But for now, 52% is close enough to half-level that we're happy.

We're still exploring the feature, so we'll let you know if we find out anything else. For now though, it looks like a nifty little way that you can automate your smart lights directly from your Qolsys IQ Panel 2 Plus System! If you have any questions about the feature, or if you want to learn more about alarm monitoring, send an email to support@alarmgrid.com. We're here to check email from 9am to 8pm ET M-F. We look forward to hearing from you!

After much anticipation Firmware Version 2.5.3 for the Qolsys IQ Panel 2 Plus is now available! This update brings support for the PowerG Wired to Wireless Converter, as well as some other new features. Everyone with an IQ Panel 2 is encouraged to download the update as soon as possible.

Support for the DSC PG9WLSHW8 PowerG Wired to Wireless Converter is the biggest new addition for Firmware Version 2.5.3. We covered the PowerG Wired to Wireless Converter extensively in a post last month. But just as a quick recap, the device allows to you to connect hardwired sensors so that they can communicate with the IQ Panel 2 Plus wirelessly across the PowerG protocol. This is an excellent way to upgrade from an older hardwired system, as it can prevent you from having to purchase entirely new wireless sensors.

The PG9WLSHW8 also includes all the benefits of PowerG. This includes a wireless range of up to 2,000 feet away from the IQ2+ in an open air environment, military grade 128-bit AES encryption, and Frequency Hopping Spread Spectrum (FHSS) technology for added protection. Up to eight (8) hardwired zones are built into a single converter, and you can use up to two (2) of the PG9WLSHW8 units per IQ2+ System. The unit even offers support for 2-wire or 4-wire smoke detectors, plus a 700mA supervised output for adding a wired siren.

Of course, IQ Panel 2 Firmware Version 2.5.3 includes a huge bundle of other new features and functions. Even if you don't plan on adding a DSC PG9WLSHW8 unit, there are still many other reasons to receive the upgrade. We'll touch on all the other new additions below.

The IQ2 system now has Panel Ambient Noise Detector settings to adjust noise threshold and duration. Qolsys added this feature with MDU settings where noise complaints are a concern. The feature can be used in-place of the panel's built-in glass break sensor. Alarm.com is planning to add back-end support for this feature sometime in the future.

Alarm.com commercial customers will be able to take advantage of their Smarter Business Temperature Monitoring (SBTM) service plan, which is used in conjunction with the DSC PG9905 PowerG Temperature Sensor. The SBTM service plan allows for 24/7 monitoring, real-time alerts, and historical temperature reporting. It is designed with businesses like restaurants, grocery stores, and pharmacies in mind. Alarm Grid customers with Alarm.com commercial accounts can contact us for more information. In addition, the IQ2+ can now display a trouble condition when an external probe is disconnected from the DSC PG9905.

If you use Alarm.com for solar energy monitoring, then you will be pleased to know that IQ Panel 2 Firmware Version 2.5.3 offers the ability to provide information from your solar inverter right on your security panel! Solar inverter units from SolarEdge and Enphase are supported. Please see this prior blog post for more info about Alarm.com Solar Monitoring.

Thinking ahead, Qolsys has made Firmware Version 2.5.3 compatible with future Z-Wave 700-Series daughter cards. The 700-Series of Z-Wave will represent the successor to Z-Wave Plus, also known as the Z-Wave 500-Series. Like all new iterations of Z-Wave technology, the 700-Series will allow for extended range and battery life when used with a compatible Z-Wave controller or hub. We hope to see 700-Series Z-Wave devices enter the market sometime in the not-so-distant future. Qolsys also made improvements to the IQ2 Z-Wave Diagnostics Map when using the Z-Wave 6.81 SDK to include RSSI values, as well as the ability to move automation device on the Diagnostics Map.

Some new 500-Series Z-Wave Plus devices are now supported by the IQ Panel 2. Most notably, these include Z-Wave switches from Eaton. Newly supported models include the RF9601, RF9617, RF9640-N, and RF9642-Z. It's good to see Qolsys increasing their support of compatible Z-Wave devices, and we have heard particularly nice things about the Z-Wave switches from Eaton and Cooper.

You can now disarm from the main IQ Panel 2 during the Exit Delay if the arming session was initiated from an IQ Remote, PowerG Keypad, or key fob device. Qolsys also added three (3) new Sensor Groups for keypads, key fobs, and panic switches. These new Sensor Groups include (3) Mobile Silent, (5) Fixed Silent Auxiliary, and (7) Mobile Silent Auxiliary. These new Sensor Group options should add some more versatility for these devices. And as for the Qolsys IQ Remote Keypad, it now has the ability to pair with IP routers using the Protected Management Frame (PMF) protocol.

There are some new changes to the Easy Install Wizard that loads upon booting up the system for the first time. A new drop-down option will allow you to select one of (13) languages for the setup wizard. There is also a new page in the wizard with QR links for you to scan using the camera on your Android or iOS phone to quickly download the Alarm.com Mobile App. Also added to the Easy Install Wizard are new help screens that provide more information on how to pair and test door and window contacts and motion detection sensors.

Some general improvements to the system's PowerG firmware have also been bundled with Firmware Update 2.5.3. The PowerG Modem Firmware is now Version 2.38. There is now support for Fire Trouble and Dirty Detector Trouble on the IQ2 and ADC when DSC PG9936 PowerG Smoke Detectors are used. Proximity tag support is now supported with the Visonic PowerG Wireless Keypads (models KP141 and KP241). And the Alarm.com back end can now show the "Not Networked" status for PowerG Sensors in the Event History. This occurs when a PowerG device is enrolled with the panel, but then fails to complete the network association and goes into RF sensor failure.

There are also some changes affecting certain PowerG Door and Window Contact Sensors. For the DSC PG9309 and DSC PG9312, both the reed switch and the auxiliary input can be disabled during disarm. The same also applies to the auxiliary input on the DSC PG9945. The purpose of this is to extend the battery life on high traffic doors. Additionally, the PG9945 and PG9309 can be learned-in with the IQ2+ twice. One zone will be for the sensor's internal reed switch, which the other will be used with the auxiliary input.

Other miscellaneous features have been added as well. LiveAnswer is now supported on the IQ2 for security cameras with non-standard aspect ratio streaming. New languages of German, Danish, Portuguese, Hungarian, and Romanian have all been added to the IQ Panel 2. The IQ2 will also now provide audible and visual indication of dual-path failures when the EN Grade 2 Setting is enabled. A change to the Swinger Shutdown feature has been made so that once a sensor reaches its Swinger Shutdown limit, a subsequent sensor event will tell the IQ2 to send an event notice to Alarm.com. Lastly, various improvements to the system have been made so that the IQ2 meets the EN50131-1 Standard.

Now that we have covered all of the new features included with Firmware Version 2.5.3, we can cover the process for upgrading your IQ Panel 2. Qolsys did things a little bit different this time. In order to download 2.5.3, your IQ Panel 2 or IQ Panel 2 Plus must be running a firmware version between 2.0.1 and 2.4.2. Do not attempt to download 2.5.3 if your IQ Panel 2 is running Firmware Version 2.5.0 or 2.5.1. If your IQ2 is on one of those firmware versions, then you must upgrade in stages by upgrading to Firmware Version 2.5.2 first, and then upgrading to Version 2.5.3. More information on upgrading to 2.5.2 can be found here.

If you need to check the firmware version for your panel, click the small grey bar at the top of the screen, and choose Settings > Advanced Settings > enter Installer Code (default 1111) > About > Software. You should see the firmware version displayed. The panel in the picture below is already on 2.5.3.

Once your IQ2 is on a firmware version of 2.0.1 to 2.4.2, or is on Firmware Version 2.5.2, then you can begin upgrading the Qolsys IQ Panel 2 Firmware Version 2.5.3. To begin, make sure your panel is monitored and connected with the Alarm.com servers via WIFI. The panel should be plugged into its AC outlet, and it should not have a low-battery condition.

When ready, you can perform the update by clicking the small grey bar at the top of the screen and selecting Settings > Advanced Settings > Installer Code (default 1111) > Upgrade Software > Patch Tag > enter iqpanel2.5.3 > OK > Upgrade Using Network. Then press OK when prompted. It will take about five (5) minutes for the update process to complete. The panel will reboot as part of the update process.

If you have any questions about the Qolsys IQ Panel 2 Plus, please reach out to us. Also remember to check out this post to learn more about our monitoring plans for gaining access to Alarm.com. The best way to contact us with questions about the IQ Panel 2 System or alarm monitoring in general is to email support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

Alarm Grid is back with another video recap! This time, we have six (6) new videos to share. We spent a lot of time this week focusing on the 2GIG GC3e, but we also covered some other security equipment as well. We hope you enjoy this latest batch of videos. Let's check them out!

Properly Opening Up a 2GIG GC3e

I show you how to open up the 2GIG GC3e Security Panel. Before opening the system, you must loosen the set screw at the bottom. If the panel is wall-mounted, you can press the panel against the wall and lift upward. Otherwise, lay the panel face-down, and pop off the back plate using your finger or a screwdriver. Opening up the GC3e Panel is often done to access the system's terminal block and backup battery.

Powering On the 2GIG GC3e

I show you how to power on the 2GIG GC3e Alarm System. The system uses a 14VDC, 1.7A transformer for primary power. If primary power is lost, then a backup battery will keep the system running. When powering on the 2GIG GC3e, we recommend connecting the backup battery first, followed by the transformer. Alarm wiring is not included with the 2GIG GC3e, so you must supply your own. We recommend using a Honeywell LT-Cable for this purpose.

Deleting a Defective Z-Wave Device from the GC3 or GC3e

I show you how to delete a defective Z-Wave device from a 2GIG GC3 or 2GIG GC3e. Some reasons why a Z-Wave device might be displayed as failed include the device being powered down or out of wireless range. Deleting a defective Z-Wave device is usually a good option if the device is lost or destroyed so that a traditional exclusion process cannot be performed. Any failed Z-Wave device will have an error icon next to it in the Smart Home Devices Menu.

Setting Up a Cellular Communicator for a 2GIG GC3e

I show you how to add a cellular communicator to a 2GIG GC3e Security System. Doing this will allow you to activate the 2GIG GC3e System for monitoring service. And if the monitoring plan includes access to Alarm.com, then you will also be able to control the system remotely through that platform. The 2GIG GC3e has a side slot for you to easily install a cellular radio. Remember to power down the system completely before installing the cellular communicator.

Powering the TG-1 Express Using the On-Board Terminals

I show you how you can power the Telguard TG-1 Express using its on-board power terminals. The Telguard TG-1 Express is used to take over the phone dialer for a panel so that it can communicate across a cellular network. Normally, the TG-1 uses a single RJ31X connection for power and communication with the panel. But if the existing power wires from the RJ31X cable are cut, then you can instead make the auxiliary power connections at the TG-1 on-board terminals.

Properly Closing the Qolsys IQ Panel 2

I show you how to properly close the Qolsys IQ Panel 2 Security System. To properly close the system, you want to align the top tabs first. Then you should lock the bottom two (2) tabs into place. Lastly, make sure the top four (4) tabs remain closed, and click them into place if they are not. The panel will make a strange noise every half-hour if it is not closed properly. The main reason to open the IQ2 is to replace its backup battery every few years.

Last year, we checked out the Alarm.com Alexa Skill that allows you to set up your Alarm.com Security System for use with Alexa Voice Commands. Today, we're taking a closer look at the features offered from the integration. This includes all of the system commands you can make through Alexa.

With the Alarm.com Amazon Alexa Skill, you can use Alexa Voice Commands to control your system, check its current status, and perform home automation functions. Getting started is as easy as enabling the Alarm.com Alexa Skill within the Skills & Games section of the Alexa App. You can easily find the skill by searching "Alarm.com". From there, all you need to do is click the button to enable the skill and provide your Alarm.com account information.

Make sure to choose the Alarm.com Skill, not the Alarm.com Smart Home Skill. The standard Alarm.com Skill supports a much more robust selection of commands than the Alarm.com Smart Home Skill. You can see the standard Alarm.com Skill in the picture below.

There are some important things to keep in mind regarding the Alarm.com Skill and Alexa Voice Commands. For one, you cannot use Alexa to Arm Away. Only Stay Arming is possible through Alexa Voice Commands. Second, certain "Secure" commands, such as disarming or opening a garage door, will require you to provide a PIN code as part of the process. This is done for security purposes, and it prevents unauthorized users from controlling your system through Alexa Verbal Commands. Please note that Secure Commands must be enabled when setting up the Alarm.com Skill. You will create a 4-digit PIN as part of the process.

Once you have the Alarm.com Alexa Skill set up, there are many commands available. We will go through a list of some of the possibilities. Keep in mind that commands are initiated by saying "Alexa, ask Alarm.com to...", as that lets Alexa know to send the command through Alarm.com. Also remember that Secure Commands using a 4-digit code are only available if you enable Secure Commands within the Alexa App. When providing the 4-digit code, it is advised that you speak out each digit, rather than making shortcuts. For example, if your PIN is 1-2-3-4, then say "One-Two-Three-Four", rather than "Twelve Thirty-Four".

• "Alexa, ask Alarm.com to Arm Stay."
• "Alexa, ask Alarm.com to Arm Stay Partition One."
• "Alexa, ask Alarm.com to Arm Stay with no Entry Delay." - Remember to Disarm through Alarm.com later to prevent a false alarm.
• "Alexa, ask Alarm.com to Disarm with [PIN Code]."
• "Alexa, ask Alarm.com to Disarm Partition One with [PIN Code]."
• "Alexa, ask Alarm.com what is the state of my system?"
• "Alexa, ask Alarm.com is my panel Disarmed?"
• "Alexa, ask Alarm.com to switch ON the hallway light."
• "Alexa, ask Alarm.com to turn the hallway light all the way up."
• "Alexa, ask Alarm.com to turn ON all the lights."
• "Alexa, ask Alarm.com switch OFF the bedroom light."
• "Alexa, ask Alarm.com turn OFF all the lights."
• "Alexa, ask Alarm.com to set the bedroom light to 70 percent."
• "Alexa, ask Alarm.com to lower the hallway light to 25."
• "Alexa, ask Alarm.com to lock the front door."
• "Alexa, ask Alarm.com to lock all the doors."
• "Alexa, ask Alarm.com to unlock the front door with [PIN Code]."
• "Alexa, ask Alarm.com to unlock the doors with [PIN Code]."
• "Alexa, ask Alarm.com to open the garage door with [PIN Code]."
• "Alexa, ask Alarm.com to close the garage door."
• "Alexa, ask Alarm.com if the garage door is open."
• "Alexa, ask Alarm.com to make it warmer." - This increases the temperature by 2 degrees Fahrenheit.
• "Alexa, ask Alarm.com to make it cooler." - This decreases the temperature by 2 degrees Fahrenheit.
• "Alexa, ask Alarm.com what the thermostat temperature is."
• "Alexa, ask Alarm.com to set the temperature to 70."
• "Alexa, ask Alarm.com to record a clip on the bedroom camera."
• "Alexa, ask Alarm.com to run the Scene Movie Night."

We know that's a very extensive list, but we wanted to show you just how much can be done through Amazon Alexa Voice Commands. If you have any questions about the Alarm.com Alexa Skill, or if you are interested in signing-up for monitoring service to gain access to Alarm.com, then please email us at support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

Big changes are coming to the Z-Wave Alliance. The organization has established a new Standards Development Organization (SDO) structure to further improve upon the home automation technology. Qolsys and Alarm.com have both been named as founding members of the new Z-Wave SDO structure.

For anyone unfamiliar with the Z-Wave Alliance, it is a non-profit organization dedicated to developing and promoting Z-Wave technology. The newly formed SDO structure provides members with special opportunities to participate in the development of the popular home automation protocol. This includes new technical workgroups and committees with an emphasis on operational, technical, and marketing needs.

What excites Alarm Grid about the announcement is the inclusion of Qolsys and Alarm.com as founding members of the SDO structure. This is great news, as we expect both of these companies to contribute greatly in making Z-Wave technology even more accessible to users of security systems. This is great news for anyone who builds around their home or business alarm system for home automation functionality.

Alarm.com Chief Product Officer Dan Kerzner said of the news, "Alarm.com has used Z-Wave for more than a decade to help expand our platform so that millions of people can control and manage an ever-growing range of devices that work together to protect and automate their home or business... Along with the other founding members, we remain committed to shaping this evolving and impactful technology.”

In addition to Alarm.com and Qolsys, five (5) other companies have been named as founding members for the Z-Wave Alliance SDO structure. Alarm Grid has been eagerly awaiting the release of the next generation of Z-Wave devices, also known as the 700-Series. The current generation of Z-Wave, known as the 500-Series, or Z-Wave Plus, has proven to be a huge success in the field of home automation. We expect the Z-Wave Alliance to continue their triumphs moving forward, and this new organizational structure should only help.

Alarm Grid has always been major supporters of the Z-Wave Alliance and their work in promoting Z-Wave technology and educating automation professionals and end users alike. The group maintains an extensive list of Z-Wave-certified products, which includes technical information and specifications. If you ever want to learn more about the various Z-Wave products out there, we strongly recommend checking out their certified product database. You will likely need to find everything you know about your current Z-Wave home automation products, as well as any Z-Wave products that you may be considering in the future.

If you have any questions about how you can get started with Z-Wave technology and home automation, then please reach out to us! The ability to use Z-Wave devices like lights, locks, and thermostats is a fantastic perk of owning a security system. We offer many monitoring plans that will allow you to control your Z-Wave devices from anywhere, simply by using a mobile app or web browser. To learn more, send an email to support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

Alarm.com has announced that a firmware update will be coming for their slimline version of the SkyBell Doorbell Camera. This refers to the SkyBell ADC-VDB105 and the SkyBell ADC-VDB106 for use with Alarm.com. The update will be pushed down automatically to the devices in the coming weeks.

According to Alarm.com, Firmware Upgrade Version 3062 will fix an issue that caused the ADC-VDB105 and ADC-VDB106 to reboot periodically. The update also improves upon the motion detection function for these cameras. Alarm.com refers to the improved motion detection as "Motion Detection 2.0".

Any camera that has its motion sensitivity set to anything other than the default value of Medium will automatically opt into Motion Detection 2.0 upon the completion of the update. Cameras with the default motion sensitivity setting of Medium will continue using Motion Detection 1.0.

Motion Detection 2.0 offers many advantages over the previous version. The enhanced motion detection uses a fixed lower portion of the screen, and it takes object size into account. Additionally, the sensitivity slider can increase and decrease the size of the fixed detection area and the minimum object size needed to activate the camera. You can also disable PIR detection entirely by choosing "Extremely High" sensitivity.

Once the update is complete, a user will be able to switch between the old and new versions of motion detection via the Alarm.com customer website. After logging into Alarm.com, choose Video > Video Device Settings > Select Device > Video Device Info > Motion Detection.

In order to receive the automatic update, simply have your slimline ADC-VDB105 or ADC-VDB106 powered on and connected with the Alarm.com servers. Alarm.com will be pushing the upgrade down to these devices during an overnight update process. Devices that are not online to receive the upgrade can be updated manually at a later date.

Please note that this update only applies to the slimline models. The "round" ADC-VDB101 and ADC-VDB102 are not receiving an update. Also keep in mind that this is for the Alarm.com versions of the SkyBell only. This does not apply to the standard SkyBell Doorbell Cameras that are used with Total Connect 2.0 and the native SkyBell App.

If you have any questions about this upcoming update, please email us at support@alarmgrid.com. And remember to check out our monitoring page to learn more about our monitoring services. We check our email during our regular business hours of 9am to 8pm ET M-F. We look forward to hearing from you!

We have made a discovery regarding the compatibility for the Honeywell L5100-WIFI for LYNX Touch Systems. It turns out that L5100-WIFI units with the updated MAC prefix of B82CA0 can be used with Honeywell L5100 Systems running a firmware version of at least 5.00838, but less than 5.05000.

If you aren't familiar with the Honeywell L5100-WIFI, it is an internet communicator that allows a compatible Honeywell LYNX Touch Panel to communicate with the Resideo AlarmNet Servers across an IP (internet protocol) network. The L5100-WIFI accesses the internet by connecting with a local WIFI network. Many users rely on the L5100-WIFI for inexpensive IP monitoring service. The communicator can also be used to set up the LYNX Touch System with Total Connect 2.0, provided that the user's alarm monitoring plan includes access to the platform.

If you recall back in the summer of 2018, it was announced that new Honeywell L5100-WIFI units had an updated MAC prefix, as it was changed from 00D02D to B82CA0. This had several implications. Starting with LYNX Touch Firmware 5.05000, Resideo locked the required MAC prefix so that only L5100-WIFI units with 00D02D were supported. This was later revised in Firmware Version 8.00183 to support the new MAC prefix of B82CA0. As a result, LYNX Touch Systems with a Firmware Version of at least 5.05000, but less than 8.00183, cannot support newer L5100-WIFI units with the MAC prefix of B82CA0. For LYNX Touch firmware in Canada, the required MAC prefix of 00D02D became locked with Firmware Version 5.15000.

However, we didn't realize that LYNX Touch Systems running firmware versions below 5.05000 (and below 5.15000 for Canadian models) do not have the locked MAC prefix requirement. This means that if you have a Honeywell LYNX Touch System with a firmware version of less than 5.05000, then you can use it with a newer L5100-WIFI unit with a MAC prefix of B82CA0. It still must meet the minimum firmware requirement to support the L5100-WIFI (Firmware Version 5.00838), but this allows for some new monitoring possibilities. Most notably, it allows certain Honeywell L5100 units use either the new L5100-WIFI model with the updated MAC prefix or the old model with the old MAC prefix.

In spring of 2019, it was announced that Resideo was no longer allowing Honeywell LYNX Touch Panels to receive over-the-air (OTA) firmware updates. Instead, firmware updates could only be applied locally using the Honeywell LYNXTOUCH-MSD Firmware Updater Tool. Initially, the updater tool was only compatible with the Honeywell L5210 and Honeywell L7000, but it was later made compatible with the Honeywell L5200 as well. But the updater tool was never made compatible with the Honeywell L5100. This makes it impossible to update the firmware for a Honeywell L5100 Security System, and there is no way to get the system onto Firmware Version 8.00123 or higher.

But since Resideo didn't begin locking the required MAC prefix to 00D02D until 5.05000, an L5100 running a firmware version of at least 5.00838, but less than 5.05000, can support all L5100-WIFI units, regardless of their MAC prefix. Therefore, if you have an old Honeywell L5100 System lying around that you were thinking could never be monitored again unless you found a used L5100-WIFI with the old MAC prefix, it may be a good idea to check its firmware to see if it falls in that range.

If you want to check the firmware for a Honeywell L5100, you can do so by choosing Security > More > Tools > enter your Master Code (default 1234) > Test. The firmware revision will be displayed at the top of the screen. This process is the same for any LYNX Touch System, so you can also use this method to check your L5200, L5210, or L7000 firmware. Below is a picture of a Honeywell L7000 on Firmware Version 9.00209..

If you find that your L5100 is running a firmware version of 5.05000 or higher (5.15000 or higher in Canada), then you will be limited to using the older L5100-WIFI with the MAC prefix of 00D02D. With any luck, you may be able to find a used model somewhere with the older prefix. But should your L5100 be running a lower firmware, then the system will be able to support any L5100-WIFI model, including the new ones that you can purchase from Alarm Grid. This is an excellent way to get an old L5100 System set up with low-cost IP monitoring.

Of course, if you have an L5200, L5210, or L7000, then it is recommended that you get the Honeywell LYNXTOUCH-MSD Firmware Updater Tool to upgrade the system firmware to the latest version. The latest firmware is 9.0213 at the time of this writing. Updating to the latest firmware version is always recommended. And as long as the firmware version is 8.00183 or higher, the system can support all versions of the L5100-WIFI, regardless of the MAC prefix.

If you have any questions about the L5100-WIFI or the Honeywell LYNX Touch Systems, then please reach out to us! We are best contacted via email at support@alarmgrid.com. Our hours for checking email run from 9am to 8pm ET M-F. This is also a great email to reach us if you are interested in starting new monitoring service. We look forward to hearing from you!