How can I see the video from a Honeywell TC camera?
Posted By Joe GonnellaThere are two ways of viewing video from a Honeywell Total Connect 2.0 Camera.
Honeywell has released its own wireless, WIFI enabled, ip cameras. They are called IPCAMs and come in a variety of models for different applications. Honeywell currently offers three models of their IPCAMS. The IPCAM-WL is an indoor, low light camera. The IPCAM-PT2 is a pan-tilt camera that can be manipulated remotely through Total Connect 2.0, a WIFI enabled Lynx Touch or Lyric panel. The IPCAM-WO is a rugged camera that’s rated for outdoor use. All of the cameras are able to communicate over WIFI. IPCAMs can be used as standalone devices with or without an alarm system; their communication goes straight to the internet. IPCAMs also have an Ethernet jack on the back of the unit to be able to connect to a hardwired network.
There are three ways to connect IPCAMs to an IP network. The easiest method to connect is to use the WPS function. First, WPS needs to be enabled at the router supplying the WIFI network. Typically this can be done by pressing a dedicated button on the outside of the unit or by enabling WPS through the router’s web enabled GUI. After enabling WPS at the router press the WPS button on the back of the camera. The camera will automatically connect and configure itself to the WIFI network. For customers whose router doesn’t support WPS, Honeywell has released a device called the WAP that connects IPCAMs to the WIFI network using WPS. This device connects to the local router with a patch cord and has its own WPS button. With the WAP connected via Ethernet to the router, enabling WPS through the WAP and to the IPCAM allows the IPCAM to connect to the WIFI network. Lastly, in the event that WIFI isn’t going to be used, the cameras can simply be plugged into an Ethernet network with a patch cable.
IPCAMs are able to be viewed live at a Lyric panel or Lynx Touch panel that has a WIFI module installed, as long as the panel and IPCAMs are on the same WIFI network. The L5210 is able to view 2 cameras simultaneously where the L7000 and Lyric can view up to 4 cameras. IPCAMs live streams can also be viewed through the Total Connect 2.0 app. In addition to being able to view live streams, users can also configure IPCAMs to automatically record 10 second clips when a motion event occurs within their view. Up to 500 clips save to the cloud and can be watched, exported, downloaded and deleted through Total Connect 2.0. Users can also select email addresses to have motion events sent to as soon as a video event is captured.