August 2024 Archives

In the coming weeks Total Connect 2.0 users on app version 6.44.1+ with a SkyBell will be prompted to update the SkyBell Video Doorbell's firmware. This update is part of a backend migration process. There will be an option to skip the upgrade, but eventually an update will be automatic.

This affects any TC2 users with any of the following SkyBell Video Doorbells. All of these units have been discontinued:

• DBCAM-TRIM
• DBCAM-TRIMBR
• DBCAM-TRIM2
• DBCAM-TRIMBR2
• DBCAM
• DBCAM-BR

It's possible this migration has some correlation to our report from December of last year. In the prior blog, we discussed how SkyBell users were receiving recommendations to upgrade their SkyBell to "Gen5". But after this upgrade, any access the user had to their SkyBell through third-party apps, like Total Connect 2.0, would be removed. The move to Gen5, once completed, can't be undone.

Phased Process for Upgrade and Migration of SkyBell Video Doorbells with Access Through Total Connect 2.0

1. Phase I: In the coming weeks Total Connect 2.0 users will be prompted, presumably via a push notification since a particular app version (6.44.1+) is required, asking them to perform a firmware update of the video doorbell. Any user who originally set their video doorbell up through the SkyBell HD app will need the login credentials they used for that app to complete this process. The user will be prompted through a few easy steps to complete the update and migration.
2. Phase II: At some point, users who ignore the initial prompt will receive a popup dialog box when logging into Total Connect 2.0 asking them to update. If the user chooses the option "UPGRADE LATER" they can skip the upgrade temporarily. But the next time they log into TC2 the SkyBell will be upgraded and migrated without prompting. If the user accepts this invitation to upgrade, they will immediately be guided through the upgrade and migration steps. Again, any user who originally used the SkyBell HD app to configure their video doorbell will need the credentials for that app to complete this process.
3. Phase III: Any user who ignores the first two phases will eventually have their SkyBell Video Doorbell updated and migrated automatically. Please note, only Skybell doorbells that are powered up and online can be updated and migrated. Presumably, and I'm attempting to confirm this, any SkyBell video Doorbell that is not online or powered on in time for the upgrade and migration process may lose the ability to access the device through Total Connect 2.0.

For the most part, users won't notice any difference in the way their device works or appears in TC2 after this process is complete. However, this migration does mean that the SkyBell doorbell, once upgraded, will no longer be accessible through SkyBell HD or any new SkyBell apps.

In addition to no longer being accessible through any SkyBell apps, all settings in the SkyBell Video Doorbell will be set back to their factory defaults during the update and migration. Affected settings include:

• LED Color
• Motion Detection
• Motion Sensitivity
• Image Quality
• Speaker Volume
• Indoor Chime
• Outdoor Chime
• Digital Chime
• Outdoor Chime Volume

These settings can be readjusted using the TC2 app once the upgrade and migration have been completed. Another post-migration change is that SMS notifications will no longer be available for SkyBell Video Doorbell events after the migration. Push notifications and email notifications will still be available.

Changes for Users of PROSeries Panels:

Users of the Honeywell Home PROA7PLUS and Resideo PROA7PLUSC who have the panel configured to allow SkyBell viewing at the panel will need to be sure their panel is updated to firmware 03.2305.91+ in order to retain this functionality. If you need a firmware update, contact your alarm dealer. If you're an Alarm Grid customer in need of a firmware update, send us an email at support@alarmgrid.com.

To verify the version of your panel's firmware tap the Menu Icon (≡) at the bottom of the screen, then tap Tools > enter either Installer or Master Code (4112 or 1234 by default, respectively) > tap System Information > tap General Information. If your version shows lower than 03.2305.91, request a firmware update from your alarm dealer.

After the update and migration the Honeywell Home PROWLTOUCH and Resideo PROWLTOUCHC keypads will no longer support viewing of SkyBell video on their touchscreen, regardless of firmware version.

Update 09/25/24: We noticed the display issue, where apparent programming information was displayed is resolved. There's no information on exactly when this occurred.

Update 08/29/24 2:12 pm EDT: According to Resideo, they have received reports of this same behavior from other dealers. Alarm Grid alone reported no less than 17 accounts with the issue. Per engineering, the notification issue was resolved at approximately 10:09 am EDT this morning. The other issue, with erroneous programming information being displayed on the screen is ongoing.

Original Post 08/29/24 9:55 am EDT: So far, we've only seen this reported with PROSeries panels. At the top of the Activity screen some coding information is being displayed. In addition, each time a Sensor Open notification is added to the Activity screen a Disarm notification is also added, even though no disarm occurred.

Below is an example of the coding information being displayed at the top of the activity screen:

In this screenshot, you can see a disarm with the same timestamp as the preceding event:

The PROSeries panels include the Honeywell Home PROA7 and PROA7PLUS and the Resideo PROA7C and PROA7PLUSC. These panels are collectively known as the PROSeries.

This appears to be a coding error, and will hopefully be a simple fix. We have reported this to Resideo, but haven't heard back from them yet. This is a developing situation, so we will update this post as more information becomes available.

The main thing to understand at this point is that although this is an annoyance, it doesn't seem to affect the ability to control your system remotely. It also appears to have no effect on your system's ability to report alarm signals to the monitoring station, when central station monitoring is being used.

Alarm.com introduces a new floodlight and 4MP camera. The ADC-V729AC connects to 110V AC wiring, the ADC-V729 plugs into a standard outlet, and the ADC-VC729P offers PoE. The floodlight delivers a bright 3,000 Lumens while the camera offers onboard recording, PIR motion sensing, and more.

Alarm.com continues to raise the standard for video solutions in residential and small to medium commercial spaces. Consistently rolling out innovative and sought-after products, their latest ADC-V729 series floodlight and video camera combo fills a crucial gap in the market.

With a variety of options to power the unit, the ADC-V729 series can solve nearly any outdoor monitoring and viewing need. By combining PIR motion sensing with Alarm.com video analytics, onboard recording, and a bright pair of floodlights, you can protect even the darkest corners of your property.

Since there are three (3) different versions of this new device, there are three different sets of specifications. Be sure to pay attention to the correct documentation for the product you intend to use. The specifications for all versions are included in a single specification sheet located here. In the table below, we'll include the specifications that are common to all three (3) versions.

Alarm.com ADC-V729 Series Common Features

The following features are found in all versions of the ADC-V729, regardless of input power type:

Power Requirements By Product Version

All Related Product Links

The ADC-VC729P can be powered using PoE++ (802.3bt), as shown in the middle table above. This is particularly important because the earlier PoE standards (IEEE 802.3af and 802.3at) do not provide enough power for this device. Only a PoE device that supports IEEE 802.3bt can deliver the required current. Since these devices use all eight (8) pins on the RJ45 connector, make sure you use cabling that includes all four (4) wire pairs.

That brings us to another point. Because both the camera and the floodlights are being powered, the ADC-V729 Series devices use a 24 Volt power supply (ADC-V729-DC and ADC-VC729P) or 100-240 Volts AC (ADC-V729AC). A 12 Volt DC power supply that is sufficient for other Alarm.com cameras will not provide enough power for this device.

The ADC-V729 and the ADC-V729AC both support dual-band WIFI. The ADC-VC729P supports wired ethernet only. If you don't have a PoE ++ capable switch or a PoE injector available, then the ADC-VC729P can use the ADC-PSU-24V2A DC Power Supply Unit. This is also the replacement power supply for the ADC-V729 if its original power supply is lost or damaged. In the table above you'll see a link to a bundle that contains both the ADC-VC729P and a compatible PoE++ injector.

We think this is an exciting new product that fills a previously overlooked niche in the security market. Let us know your thoughts in the comments below. Do you have an idea for a video or automation product? Let us know and we'll pass your feedback along to Alarm.com, Qolsys, Resideo, 2GIG, or any of our other manufacturing partners.

Apple will end support for the legacy Alarm.com Today widget in its iOS 18 update, coming in September. As a result, Alarm.com will be removing this widget in app update 5.6.0, due in October. But widget lovers take heart! Alarm.com has plans for new widgets that will be available soon!

The use of the Alarm.com Today widget required that a user be on iOS version 11.0+, and Alarm.com app 3.7+. Successful use also required that the user be logged into the Alarm.com app with "Seamless Login" enabled and the "Remember Me" option checked upon logging in.

Without these login features set, each time the user logged out, the "Today View" widget for Alarm.com would be cleared. Once the feature was configured, up to twelve different items could be configured and organized within the view. This allowed a user to quickly determine the status of various elements of the system, and control them.

System Control Widget

According to Alarm.com: "The System Control widget empowers iOS customers with quick-access, one-touch command of their smart security systems at their fingertips. Customers can create custom widgets and place them conveniently on their Home screen or Today View for effortless control of their lights, locks, garage doors, gates, and security panels from anywhere. Plus, they can activate Scenes for whole-home automation."

Saved Clips Widget

According to Alarm.com: "iOS customers can create widgets for video clips to effortlessly keep tabs on their properties and monitor important activity—without having to open the app. Right from the Home screen of their iPhone or iPad, they can choose from a variety of size options to see thumbnails of their most recently saved clips at a glance. Customers can also long-press the widget to change the view to include only clips from a single camera, a camera group, or all cameras on the account. Once set up, they can simply tap the thumbnail of interest to quickly take a closer look and watch the recorded footage."

Safety Button Widget

According to Alarm.com: "With the Safety Button widget, customers have the comfort of round-the-clock personal protection with professional response when help is needed most. With the press of a button on their phones’ Home screen, customers can swiftly and silently summon police, fire, or emergency medical assistance from wherever they are in the U.S., day or night. Once activated, they’ll be connected directly to a trained operator who will promptly dispatch responders to their precise location. This feature requires the In-App Safety Button service package add-on."

Alarm Grid is evaluating the In-App Safety Button feature. If we determine it's a good fit for our customers we'll make it available. Once Alarm.com introduces the new widget, our customers will be able to enable this feature. Stay tuned for more information on this potential new feature.

Resideo has identified an issue with some Total Connect 2.0 passwords. Apple iOS users on firmware version 17.6.1 may be unable to log into the Total Connect 2.0 app due to certain special characters. Passwords containing a plus sign (+) or exclamation point (!) will cause a login failure.

This issue can also affect account usernames. However, since we typically use the customer's email address as the username, it's rare for these special characters to be present. After we reported a customer who suddenly couldn't log into their account, Resideo informed us of this issue. Interestingly, we tested a login using an exclamation point (!) in the password on iOS version 17.6.1, and it worked for us, so the information remains somewhat unclear.

If your password worked before but no longer does after updating your iOS device, or if you're a new TC2 user on iOS and can't log in after creating an acceptable password, the only option is to change your password.

1. Go to the Total Connect 2.0 login page.
2. Accept Cookies if prompted. Until you do, you won't be able to successfully perform Step 3 and Step 4 below.
3. Click "Problems Signing In?"
4. Click on either "Forgot Username" or "Forgot Password".
5. Follow the prompts to reset either your username or your password. If you need to reset both, you'll have to first reset one, and then follow these same steps to reset the other credential.
6. Once you've created both a Username and a Password without a plus symbol (+) you should be able to log in.

As you can see from the password reset screen, both a plus symbol (+) and the exclamation point (!), which we have verified will work, should be acceptable special characters:

HTML browser logins are not affected, nor does the issue affect Android devices. This is strictly an issue with Apple iOS devices, and as far as we know, only with firmware version 17.6.1. An iOS user who does not want to change their username or password can elect to use a browser to access their Total Connect 2.0 account instead.

This issue will likely be resolved, but whether the fix will come from Resideo through a TC2 update or from Apple via an iOS update is uncertain. If we receive any updates, we'll post them at the top of this page, so stay tuned!

Update 08/30/24: Resideo posted its final update on this issue today. To summarize, they found an issue with the battery charging scheme in the doorbell's firmware. A firmware update is being applied to future stock and will automatically be rolled out to devices in the field. You can read the full notice here.

Update 08/13/24: Resideo posted an update today regarding this issue. According to the update:

"We have determined that, if the doorbell isn’t installed within 1 year of production, the embedded battery, which is responsible for powering the doorbell while the external chime is activated, will not support a smooth installation."

This is a particularly thorny issue given that the battery in the VX1 Video Doorbell is non-serviceable. After the three (3) to five (5) years of expected battery life, when the battery begins to fail, the entire VX1 must be replaced.

You can read the full updated notice here.

Original Post 08/08/24:Yesterday, Resideo released a Technical Notice about its First Alert VX1 HD Video Doorbell. A small number of units display a red LED for an extended time after installation. If you have a unit displaying this behavior, you can return it to where you purchased it or contact your alarm dealer.

First of all, if you have a First Alert VX1 HD installed and it is working as expected there is nothing you need to do. This issue has been reported in a small number of units and only very recently. If your VX1 HD was affected, you would know almost immediately after installation.

Next, it's important to clarify which LED we're talking about here. The VX1 HD has a Status LED which is located above the doorbell button and microphone. In addition to the Status LED, the doorbell button itself has an LED surrounding it. This notice refers to the small Status LED. According to the Installation Instructions, a solid red Status LED indicates that the battery is not charging.

It's not uncommon, after installation, for the Status LED to show either red or amber. An amber Status LED indicates that the battery is below the normal operating threshold but is charging. However, if, after 90 minutes of charging, the Status LED remains red, and assuming the input power and wiring are confirmed to be good, there is a problem.

Because of this issue, Resideo has chosen to put the First Alert VX1 HD on sales hold. This means that if you attempt to order a new unit from the distributor, it won't be available. Alarm dealers may have stock on their shelves that they can continue to sell, but they run the risk of encountering this issue.

Alarm Grid doesn't keep stock, ensuring that when you order from us, the product you get is the most recently manufactured version possible. Though distributors do keep stock, so there is always a chance that a seldom-ordered product may have been on their shelf for some time.

We will not discontinue the First Alert VX1 HD, as we assume this hold will be brief. You can still order the doorbell on our site. Currently, if you do you'll receive an email that the product is on backorder and that it will be shipped as soon as stock becomes available again.

That's all we know at this point. There is not enough information to determine if this is a problem with the battery, the charging circuit, or if this is just a status indication malfunction. It's unlikely that Resideo manufactures the battery. Is it an issue with the battery vendor? Is it something anomalous that occurred during manufacturing? That's why the product has been put on hold so they can perform testing and diagnostics.

In some cases, the manufacturer may need customers to send them problem units. It's difficult to confirm and fix an issue if you can't reproduce it. If that's the case here, it's possible Resideo may ask your alarm dealer to send returned VX1s directly to them for testing. As an end-user, this won't really affect you. It's just nice to know what goes on behind the scenes sometimes.

Depending on what they find, Resideo may require that any existing distributor stock be returned to manufacturing to be reworked or retrofitted. This is usually accompanied by some type of marking on the box, like a green dot. This will usually be located near the box date code. In this way, everyone will be able to tell that a newly purchased First Alert VX1 HD Video Doorbell does not suffer from this issue.

Alarm.com now offers a feature called Alarm Mode. When an alarm occurs on an Alarm.com system the user can access a special Alarm Mode card from the app dashboard. With all relevant alarm-related information grouped together, a user can quickly assess the situation and respond accordingly.

Alarm.com is very proactive in its efforts to innovate and diversify its product offerings. In addition to adding exciting new features that utilize existing hardware and software capabilities, Alarm.com constantly seeks ways to increase user engagement without raising the incidents of unwanted alarm dispatch.

Toward that end, they recently rolled out Alarm Mode. Beginning with version 5.4.1 of the Alarm.com customer app, nearly any system alarm occurring on an Alarm.com panel will trigger Alarm Mode. This feature is a segment or card located in the customer dashboard. When you log into the app and tap on Alarm Mode, you can view all activity related to the alarm.

This can include video clips, a link to live video, video doorbell camera information, and door lock status. What you see will depend on which hardware and features you have, and what's happening at, and just before, the time of the alarm. With all the relevant information in one easy to access location, you can make an informed assessment and either cancel the alarm, or verify that dispatch is necessary.

A full guide to using this feature is available here. There are exceptions to which alarms initiate Alarm Mode so be sure to check out the guide. If you happen to have the In-App Cancel/Verify feature enabled on your account, Alarm Mode makes that feature even easier to use. Once you open the Alarm Mode card within the customer app you'll see the buttons to Cancel or Verify the alarm. You still have two (2) minutes from the time the alarm is reported to choose either option.

When you tap Cancel (holding for three (3) seconds is not required), a disarm is sent to the system and an alarm cancel message is sent to the monitoring station. Because the time to process every alarm varies, it is still possible that you will receive a call from the monitoring station, so be ready to provide your verbal passcode to the operator.

When you tap Verify Alarm the system will continue to display and sound the alarm locally and the monitoring station will receive a signal letting them know that a dispatch is requested. They can then contact the authorities to dispatch and they will likely still call you to gather additional information to provide to the responding authorities.

If two (2) minutes pass and you don't choose either Cancel or Verify, the option will go away and will be replaced with a "Disarm to Clear" button. For users who don't have the In-App Cancel/Verify feature enabled, this button will show up immediately in Alarm Mode and will remain until the alarm is cleared. Tapping this button will send a disarm command to the system to silence the alarm. Once the alarm is cleared, the Alarm Mode card will disappear and the app will revert to the standard dashboard.

What do you think of Alarm Mode? Do you agree that Alarm.com works hard to add value to their product and service offerings? Leave a comment below to start a discussion! We'd love to hear your thoughts.