December 2022 Archives

We did it! We made it to the end of another year. Your friends at Alarm Grid would like to express our huge thanks to all of you. As 2022 comes to an end, we appreciate all the relationships we have built. Our hope is that 2023 allows us to build even more.

Unfortunately, during the holidays the bad guys are lurking. So please be sure you are arming your alarm and benefitting from the protection it provides. Also, with the increase in at-home cooking, please make sure that you are regularly testing your smoke detectors. These, along with heat detectors and carbon monoxide detectors, must work when we need them. Regular testing will provide that assurance.

Alarm Grid will be closed all day on Friday, December 30, 2022, for our New Year's observance. This will allow us to spend time with our families as 2022 comes to an end. During this time, we will not be answering phones, responding to emails, or shipping out orders. We will return to our normal schedule on Monday, January 2, 2023 at 9:00 am.

While our support staff will be away, our monitoring station operates 24/7/365, so for those customers who have chosen full central station monitoring, your system will be continuously monitored by trained operators. They are always ready to answer the call and dispatch when needed if your alarm calls.

If you need to contact the monitoring station, either to report a false alarm or to put your system on test, you can call Criticom Monitoring Services (CMS) at (888) 818-7728 and choose Option [9]. This is the process for Alarm Grid customers who reside within the United States. Once an operator answers, you'll need to supply your name, address, and your false alarm password.

For our Canadian customers, our monitoring partner in Canada is Rapid Response. They can be reached at (800) 932-3822. Remember, when you call either monitoring station you will be asked for your name and address, and to verify your false alarm password or false alarm phrase. Providing the wrong information, or providing the Duress password, will result in a police dispatch.

If you have a support question or need to make adjustments to your account, the monitoring station won't be able to assist you with that. In those cases, please send an email to support@alarmgrid.com. Please include a detailed explanation of your request and any supporting details. We will get back to you when we return to the office on Monday. When we return, there will almost certainly be a bit of a backlog, so please be patient while we catch up. We will get back to you at our earliest opportunity.

If you are looking to sign up for new service, buy a new system, or expand your existing system, please visit alarmgrid.com. Our self-service website is always there for you. When looking to add new components, select the drop-down to "Enhance Your System" and search for the type of device you are looking for. One feature many overlook is the "Browse By" option along the right side of the page. On Monday, we will be tackling all the orders placed while we were away.

We hope that everyone stays safe, as we all say goodbye to 2022 and welcome in 2023! We look forward to working with you in 2023!

In working with our customers, Alarm Grid has seen some issues when adding a new IQ Remote. When the IQ Remote pairs to an IQ Panel 2 or IQ Panel 2+, it automatically downloads an update, which is normal. The issue arises when the patch it receives from the panel is from an older firmware version.

The IQ Remote is a great addition to any Qolsys system. It provides a similar user experience to the main alarm panel. The IQ Remote can be conveniently placed around the home to provide additional access and control for your alarm system. The IQ2 will support up to three (3) IQ Remotes.

Upon initial power-up, the remote will request to connect to WIFI. You must add it to the same network that the IQ2 is using. Next, you will need to pair the two devices.

The IQ Remote requires firmware revision 2.1.0 or higher on the IQ2 control panel. Failure to update the firmware to 2.1.0+ on the IQ2 before pairing the IQ remote with the panel will damage the keypad and require that it be replaced.

Reports have indicated that when setting up a new keypad the IQ Remote first must be connected to WIFI. Next, it will automatically get a firmware patch from the IQ Panel 2. If the IQ2 firmware has not been updated to the latest version, the patch that is sent to the IQ Remote will be older than what it already has. This seems to put the IQ Remote into an unrecoverable state.

According to reports, the IQ Remote will reboot, then tell you that it is turning on WIFI. This never happens. If you attempt to hit pair, it will indicate that you must first connect to WIFI. Unfortunately, there is no way to turn it on manually at this point. Even a factory reset, in our experience, did not allow the IQ Remote to provide an option to connect to WIFI.

Qolsys has indicated that this is a firmware issue, but is not able to tell us which firmware or why it is a recent development concerning the new IQ Remotes. Only that it occurs when the firmware on the remote from the factory is newer than the firmware provided by the IQ Panel 2/2+ upon initial setup. We post the IQ Panel 2+ firmware so that it is available to anyone who may need it, regardless of their monitoring situation.

In each of our cases, nothing would ever allow the IQ Remote to reconnect to WIFI once this problem occurred. Even updating the IQ2 made no difference. The only resolution we found was to replace the IQ Remote and ensure the IQ2 was fully updated before adding another new IQ Remote.

We have not seen this issue with an IQ Panel 4, nor have we attempted to test it (for obvious reasons). We would still recommend a firmware update, if available, before adding an IQ Remote to the IQ Panel 4. If you have encountered this issue, particularly if you have found any other resolution, please comment below. If we get any new information, we will update this blog.

The maker of the 2GIG GC3 and GC3e recommends that all users with a panel approaching 3 years of age replace the backup battery. Initially, the expected battery life was between three and five years. With the recent notice Nice, 2GIG's parent company is now suggesting a battery replacement ahead of schedule.

Apparently, swelling has been observed in some of these panels' lithium-polymer batteries. The manufacturer notes that some minor swelling is normal, but based on the notice it sounds like some batteries may be swelling beyond what is normal.

Once you open up the GC3/GC3 panel to access the battery, Nice is also warning not to puncture the battery upon removal. Do not use any type of sharp object to remove the battery. Puncturing the battery could allow dangerous chemicals to spill from the casing. Once the battery is removed, please follow local guidelines with regard to the proper disposal of lithium-ion batteries.

It is also recommended in this notice to do a firmware upgrade of your 2GIG GC3 or GC3e alarm panel at the time you replace the battery. The latest revision for these panels is 3.2.6.6770.

Reading through the firmware release notes, it does mention that the latest firmware update includes the addition of battery testing, and conditioning, as well as a status indicator for battery replacement. So, we will double down on the advice to update your panel's firmware. This revision also includes compliance with UL 985 edition 6. This standard requires that the panel recognize batteries that can no longer provide battery backup for at least 5 minutes worth of alarm signaling. When the panel recognizes that the battery lacks this capacity, it will alert the user of a low battery and the battery should be replaced at that time.

The 2GIG GC3 and GC3e use the same firmware beginning with revision 3.2.3. If you already have revision 3.2.1 or higher, then you can find all updates on the GC3e firmware update page. Older revisions may require a stepped approach to upgrading and cannot be updated all-at-once. You can find the older firmware versions on the GC3 firmware update page.

You must update to the base build of each revision, and then you can skip to the latest build of that revision. The base of each version is 3.0.x then 3.1.x, then 3.2.x. If you have an earlier revision and attempt to update directly to 3.2.1, your panel will very likely be damaged and will have to be replaced. Updating over the air using Alarm.com can help with this process, as their server should only allow you to update in the proper order.

GC3/GC3e firmware updates can be sent by your alarm dealer. When the update can be sent using WIFI at the panel, there is usually no charge, though different dealers may have different policies on this. An upgrade that has to be sent using cellular data will incur a fee, which will likely be passed onto the user by the dealer. Alarm Grid always passes these fees along with no markup. We recommend that you update using the USB port at the top of the panel. We have written detailed instructions on updating the firmware using the USB port to make this process easier to accomplish.

If your panel is approaching or past the 3-year mark, it is best to be proactive and purchase your new GC3/GC3e battery today. Then make sure to install the latest firmware, as recommended.

A New Rules Builder feature has been added for customers who have a monitoring plan with Alarm.com. It was designed to simplify the process of automating actions for scenes and rules. The feature can easily be accessed using either the customer website or the iOS or Android app.

A benefit of modern-day alarm systems is the ability to add smart devices to them. This allows for control directly from your alarm panel, remote app, computer, or by using your voice (when connected to Google Home or Alexa). Rules allow you to automate many of these actions rather than having to manually activate your devices over and over.

Previously, there was only an option to create event triggered rules, which is still a thing on the customer website, but Alarm.com has also made this new rules builder available. Alarm.com can be accessed via an app on a mobile device or a web browser on a computer. The Alarm.com mobile app is available on iOS and Android app stores. On a computer, navigate to alarm.com to log into the website.

If you always want the connected lights to come on when you enter a room that has a motion detector, you can set up a rule for that to occur any time the motion detector is activated. In an attempt to make building these types of rules easier, Alarm.com created the New Rules Builder to assist.

For example, to set up a light to turn on when motion is activated:

After logging in and selecting Automation, select +ADD NEW RULE then New Rules Builder.

Select "when." When is the trigger or what initiates the automation rule to run. In this case, when motion is detected in the Living Room. Next, you select "then." Then is the action(s) that the rule will perform after it is triggered. In our example, we want the Office Hallway light to turn on. Next, decide if the rule will run at all times or only during specific time windows. Finally, don't forget to "Save" your work.

The creation of rules can automate many repetitive functions to save time and make life easier. Rules can also go a long way toward going green and becoming more energy efficient. They provide convenience and can save you precious time and money.

Try out the new rules builder and let us know what cool things you are doing with it, and what you think of the feature.