Alarm.com Introduces Alarm Mode In Its Customer App

Alarm.com now offers a feature called Alarm Mode. When an alarm occurs on an Alarm.com system the user can access a special Alarm Mode card from the app dashboard. With all relevant alarm-related information grouped together, a user can quickly assess the situation and respond accordingly.

Alarm.com is very proactive in its efforts to innovate and diversify its product offerings. In addition to adding exciting new features that utilize existing hardware and software capabilities, Alarm.com constantly seeks ways to increase user engagement without raising the incidents of unwanted alarm dispatch.

Toward that end, they recently rolled out Alarm Mode. Beginning with version 5.4.1 of the Alarm.com customer app, nearly any system alarm occurring on an Alarm.com panel will trigger Alarm Mode. This feature is a segment or card located in the customer dashboard. When you log into the app and tap on Alarm Mode, you can view all activity related to the alarm.

This can include video clips, a link to live video, video doorbell camera information, and door lock status. What you see will depend on which hardware and features you have, and what's happening at, and just before, the time of the alarm. With all the relevant information in one easy to access location, you can make an informed assessment and either cancel the alarm, or verify that dispatch is necessary.

A full guide to using this feature is available here. There are exceptions to which alarms initiate Alarm Mode so be sure to check out the guide. If you happen to have the In-App Cancel/Verify feature enabled on your account, Alarm Mode makes that feature even easier to use. Once you open the Alarm Mode card within the customer app you'll see the buttons to Cancel or Verify the alarm. You still have two (2) minutes from the time the alarm is reported to choose either option.

When you tap Cancel (holding for three (3) seconds is not required), a disarm is sent to the system and an alarm cancel message is sent to the monitoring station. Because the time to process every alarm varies, it is still possible that you will receive a call from the monitoring station, so be ready to provide your verbal passcode to the operator.

When you tap Verify Alarm the system will continue to display and sound the alarm locally and the monitoring station will receive a signal letting them know that a dispatch is requested. They can then contact the authorities to dispatch and they will likely still call you to gather additional information to provide to the responding authorities.

If two (2) minutes pass and you don't choose either Cancel or Verify, the option will go away and will be replaced with a "Disarm to Clear" button. For users who don't have the In-App Cancel/Verify feature enabled, this button will show up immediately in Alarm Mode and will remain until the alarm is cleared. Tapping this button will send a disarm command to the system to silence the alarm. Once the alarm is cleared, the Alarm Mode card will disappear and the app will revert to the standard dashboard.

What do you think of Alarm Mode? Do you agree that Alarm.com works hard to add value to their product and service offerings? Leave a comment below to start a discussion! We'd love to hear your thoughts.