Alarm Grid Video Recap: April 18th & 19th
Posted By Michael GorisHi DIYers! We had our video team working crazy hard covering ISC West 2019. But now it's back to the grind with our usual video updates! We managed to get up four new videos for April 18th and 19th. Kudos to our technicians for working so hard. Let's take a look at our latest videos!
Connecting the Honeywell Tuxedo Touch To WIFI
Jorge demonstrates the process for connecting a Honeywell Tuxedo Touch Keypad to a WIFI network. The Tuxedo Touch must be connected to the network so that it can communicate properly with Total Connect 2.0. Proper network connectivity is necessary for the keypad and the Total Connect 2.0 platform to remain constantly in sync. Whether a user operates a Z-Wave device or a smart scene from TC2 or their Tuxedo Touch Keypad, the other platform will receive notice regarding the device activity.
Factory Resetting a Tuxedo Touch Keypad
Jorge shows users how to perform a factory reset on a Honeywell Tuxedo Touch Keypad. By performing a factory reset, all device settings and configurations will be restored to their default values. This is a good option if you are taking over the Tuxedo Touch Keypad from someone else and you want to start fresh with original settings. A factory reset might also be performed as a final troubleshooting step if the device is not working properly. But keep in mind that the entire keypad will need to be reconfigured!
Testing the 2GIG SMKT3-345 Smoke and Heat Detector
Jorge teaches users how they can test a 2GIG SMKT3-345 Smoke and Heat Detector. The device has a test button that allows a user to test the device's LED light, sounder and signal transmission. But you must perform a manual test if you want to check the functionality for the sensor. This means using canned smoke to test the photoelectric smoke detector and a hair dryer on the highest setting to test the heat detector. Remember to place your system on test mode before testing!
Joe talks about the ADC-SVR122 Stream Video Recorder. The Stream Video Recorded is designed exclusively for use with Alarm.com Security Cameras. It allows a user to achieve a 24-hour continuous recording schedule. The user can login to their Alarm.com account through the website or mobile app to view recorded clips that are stored on the ADC-SVR122. They can also connect an HDMI monitor for local viewing. The ADC-SVR122 can support up to eight cameras, and it comes in 500GB and 1TB storage options.