Alarm Grid Video Recap: May 16 & 17

Hi DIYers! We're here with a small video recap, covering May 16 & 17. It was a quiet week for our video team, as we only had five new videos. But we gotta give some credit to Jorge, as he cranked out four videos. Jarrett also came through with one. Let's take a look at the videos.

Adding a Profile Image to a Total Connect 2.0 Account

Jorge shows users how to add a profile image to their Total Connect 2.0 account. Each user on a TC2 account can have their own profile image. This helps to add a nice personalized touch to Total Connect 2.0. Any uploaded image will only be visible from TC2. It will not be visible from the panel. If you have multiple users on the same Total Connect 2.0 account, then each user can have a unique picture.

Adding a Location Image to a Total Connect 2.0 Account

Jorge teaches users how to add a location image to a Total Connect 2.0 account. Each location on a TC2 account can have its own picture. You will have a different location for each system on your Total Connect 2.0 account. This is great for users with multiple homes or businesses. Adding a unique image for each location can be a great way to differentiate them. This way, you can be sure that you are controlling the correct system when you use TC2.

Smart Home Items That are Compatible with the Honeywell Lyric

Jarrett talks about smart home items that are compatible with the Honeywell Lyric Controller. The system has a built-in Z-Wave controller for operating Z-Wave devices. Any Z-Wave device can be operated through Total Connect 2.0. The Lyric is also one of the few systems on the market that is compatible with Apple HomeKit. You can have your HomeKit devices set to respond based on activity that affects your system. It is also possible to control your Lyric through your iOS device.

Changing the Installer Code Using a Tuxedo Touch Keypad

Jorge explains how to change the Installer Code for a Honeywell VISTA Alarm System using a Tuxedo Touch Keypad. The Installer Code is the code used to enter programming and make system changes. We encourage most users to keep the code at its default of 4112. This will prevent users from being locked out of programming later. If you forget the default Installer Code, you can always look it up later. If you change the code and forget it, you will need to use the backdoor method to get back into programming.

Features Added in the 2GIG GC2 1.19 Firmware Upgrade

Jorge discusses Firmware Version 1.19 for a 2GIG Go!Control GC2 System. Upgrading to the latest firmware is very important for getting the most out of your system. Firmware Version 1.19 added support for various cellular communicators. If you want to use an AT&T LTE communicator, then you need Firmware Version 1.19.3. You can have a firmware update pushed down automatically to your panel from Alarm.com for a small fee. If your panel is not connected with Alarm.com, you will need an upgrade cable or an upgrade tool to complete the process.