Alarm Grid Video Recap: November 11th - 15th
Posted By Michael GorisHi DIYers! We're here with our usual video recap. This time we have videos featuring Jorge and Joe. We hope that you find these instructional videos helpful in using your security system. Our dedicated video team has been hard at work putting together these videos. Let's check them out!
Programming an Encore FF345 with an L5210
Jorge shows you how to program the Encore FireFighter FF345 with a Honeywell L5210 Security System. The FF345 is a listening module that activates upon hearing the Temporal 3 sound of an activated smoke detector or the Temporal 4 sound of an activated carbon monoxide detector. The device is commonly used with high-voltage or conventional life-safety sensors that otherwise couldn't integrate with a security system. Any sensor that produces a Temporal 3 or Temporal 4 sound can be used with this device.
Connecting a LiftMaster MyQ Garage Door to a Honeywell Alarm System
Joe explains how you can use a LiftMaster MyQ Garage Door Controller with the Total Connect 2.0 platform. Total Connect 2.0 is an interactive monitoring and automation platform that is commonly used with Honeywell Security Systems. By pairing your MyQ WIFI Garage Door Controller with Total Connect 2.0, you can open and close your garage door from pretty much anywhere using the Total Connect 2.0 Mobile App. You can also get text alerts from TC2 regarding any garage door activity. However, you cannot use a MyQ Garage Door Controller with TC2 smart scenes.
IQ Panel 2 vs IQ Panel 2 Plus Alarm Systems
Jorge explains how the main difference between the original Qolsys IQ Panel 2 and the Qolsys IQ Panel 2 Plus is the sensors that they support. The original Qolsys IQ Panel 2 can only use 319.5 MHz sensors. This includes Qolsys S-Line Sensors. The Qolsys IQ Panel 2 Plus can use 915 MHz DSC PowerG Sensors, plus one of three different legacy sensor frequencies. You can choose between legacy sensor support for 319.5 MHz sensors, 345 MHz sensors, and 433 MHz sensors.
Using a Qolsys IQ Panel 2 w/o Monitoring
Jorge explains that while it is technically possible to use a Qolsys IQ Panel 2 without alarm monitoring service, it is not recommended. By not monitoring the system, you will not be able to receive text and/or email alerts from Alarm.com regarding system activity. You will also be unable to receive automatic emergency dispatch from a central monitoring station in the event of an alarm. But you can still use the system as a local noisemaker and as a Z-Wave hub without monitoring.
Activating the Chime on a Qolsys IQ Panel 2
Jorge teaches you about the chime settings on the Qolsys IQ Panel 2 System. A chime is a pleasant sound that lets you know when a sensor has been faulted. This sound is much quieter than a siren or an alarm. It's just a quick way to let you know that some activity has occurred. On a Qolsys IQ Panel 2, you can enable or disable chimes across the entire system. You can also set individual chimes for each zone. You can choose from a selection of different chimes for each zone.