Security Cameras Posts

Alarm.com video customers have another great weapon in their defensive arsenal. It's called Perimeter Guard™ and it works like this. Customers with video analytics enabled and using compatible cameras can program those cameras to flash their LEDs and make noise when an intruder is detected.

All that is required in order to enable this feature is an Alarm.com monitoring plan with Video Analytics enabled. Any Alarm Grid customer who subscribes to a monitoring plan that supports video can have this feature enabled. We don't enable Video Analytics by default because we pay more for it, but we don't charge more for it. But if you want to utilize this feature we're happy to enable it for you. Both of our Platinum plans, as well as our stand-alone video plan support this feature.

The list of cameras that can be used with this feature is always growing. Basically, the camera needs to have either a visible LED or a speaker with which to make noise on. Currently, the cameras that support Perimeter Guard™ are (updated 4/23):

• ADC-V724 on firmware version 0.6.1.387+ (supports LED and Audio Alert)
• ADC-V523 on firmware version 0.6.1.387+ (supports LED and Audio Alert)
• ADC-V723 on firmware version 0.6.1.387+ (supports LED only)
• ADC-VC727P all versions (supports LED and Audio Alert)
• ADC-VC827P all versions (supports LED only)
• ADC-VC847PF all versions (supports LED only)
• ADC-VC728PF on firmware version 0.6.3.601+ (supports LED and Audio Alert)
• ADC-VC838PF (supports LED only)
• ADC-VDB770 on firmware version 02199+ (supports LED and Audio Alert)

With Video Analytics enabled and a compatible camera, the only other thing required is to set up a Video Analytics rule for each compatible camera. This is one of those features that you set, then forget. Get the setup correct, and then it'll take care of itself!

To set this feature up through the Alarm.com Customer Website, follow these steps:

1. Log into the website. Go to www.alarm.com/login and using your Alarm.com credentials log in, completing any 2-factor authentication required.
2. Click Video
3. Click Recording Rules
4. Create or Edit Rule. You can either click the pencil icon to add this feature to an existing Video Analytics rule for a compatible camera, or you can Add a new rule. To see how to create a rule using Video Analytics, check out this informative FAQ. Verify that the initial Video Analytics settings are properly configured, then click Next.
5. Choose response. In the Activates section choose the audible and visible response desired:
   
   • Camera LED response. Click to toggle the Camera Status LED to Enabled if you want the LED to respond when activity is detected. There is a Duration drop-down, select how long you want the LED response to last.
   • Camera Audio Alert. This option is only available on cameras using the 2-Way Audio feature. Click the Camera Audio Alert toggle to enable an Audio Alert. There is an Audio Sound dropdown menu. Select the type of sound you want the camera to make.
6. Click Save

To set this feature up through the Alarm.com App, follow these steps:

1. Log into the App. Open the Alarm.com app and using your Alarm.com credentials log in, completing any 2-factor authentication required. Click the Menu icon in the upper left.
2. Tap Video from the available menu. Then tap the Gear icon.
3. Tap Recording Rules
4. Create or Edit Rule. You can either click the pencil icon to add this feature to an existing Video Analytics rule for a compatible camera, or you can Add a new rule. To see how to create a rule using Video Analytics, check out this informative FAQ. Verify that the initial Video Analytics settings are properly configured, then click Next.
5. Choose response. In the Activates section choose the audible and visible response desired:
   
   • Camera LED response. Click to toggle the Camera Status LED to Enabled if you want the LED to respond when activity is detected. There is a Duration drop-down, select how long you want the LED response to last.
   • Camera Audio Alert. This option is only available on cameras using the 2-Way Audio feature. Click the Camera Audio Alert toggle to enable an Audio Alert. There is an Audio Sound dropdown menu. Select the type of sound you want the camera to make.
6. Tap Save

It's that simple! Once you have this configured, using the advanced video analytics available through Alarm.com, the rule will take care of itself. The idea is that the flashing LED and the audible sounder will scare away an intruder before they ever make it to your home. It's a pound of prevention to ward off a ton of regret.

What do you think about this Alarm.com feature? Have you used it and had experience with it? Do you think it's something you'd like to give a try? Leave a comment below and let us know what you think. We love to hear from our readers.

Alarm.com video customers have another great weapon in their defensive arsenal. It's called Perimeter Guard™ and it works like this. Customers with video analytics enabled and using compatible cameras can program those cameras to flash their LEDs and make noise when an intruder is detected.

All that is required in order to enable this feature is an Alarm.com monitoring plan with Video Analytics enabled. Any Alarm Grid customer who subscribes to a monitoring plan that supports video can have this feature enabled. We don't enable Video Analytics by default because we pay more for it, but we don't charge more for it. But if you want to utilize this feature we're happy to enable it for you. Both of our Platinum plans, as well as our stand-alone video plan support this feature.

The list of cameras that can be used with this feature is always growing. Basically, the camera needs to have either a visible LED or a speaker with which to make noise on. Currently, the cameras that support Perimeter Guard™ are (updated 4/23):

• ADC-V724 on firmware version 0.6.1.387+ (supports LED and Audio Alert)
• ADC-V523 on firmware version 0.6.1.387+ (supports LED and Audio Alert)
• ADC-V723 on firmware version 0.6.1.387+ (supports LED only)
• ADC-VC727P all versions (supports LED and Audio Alert)
• ADC-VC827P all versions (supports LED only)
• ADC-VC847PF all versions (supports LED only)
• ADC-VC728PF on firmware version 0.6.3.601+ (supports LED and Audio Alert)
• ADC-VC838PF (supports LED only)
• ADC-VDB770 on firmware version 02199+ (supports LED and Audio Alert)

With Video Analytics enabled and a compatible camera, the only other thing required is to set up a Video Analytics rule for each compatible camera. This is one of those features that you set, then forget. Get the setup correct, and then it'll take care of itself!

To set this feature up through the Alarm.com Customer Website, follow these steps:

1. Log into the website. Go to www.alarm.com/login and using your Alarm.com credentials log in, completing any 2-factor authentication required.
2. Click Video
3. Click Recording Rules
4. Create or Edit Rule. You can either click the pencil icon to add this feature to an existing Video Analytics rule for a compatible camera, or you can Add a new rule. To see how to create a rule using Video Analytics, check out this informative FAQ. Verify that the initial Video Analytics settings are properly configured, then click Next.
5. Choose response. In the Activates section choose the audible and visible response desired:
   
   • Camera LED response. Click to toggle the Camera Status LED to Enabled if you want the LED to respond when activity is detected. There is a Duration drop-down, select how long you want the LED response to last.
   • Camera Audio Alert. This option is only available on cameras using the 2-Way Audio feature. Click the Camera Audio Alert toggle to enable an Audio Alert. There is an Audio Sound dropdown menu. Select the type of sound you want the camera to make.
6. Click Save

To set this feature up through the Alarm.com App, follow these steps:

1. Log into the App. Open the Alarm.com app and using your Alarm.com credentials log in, completing any 2-factor authentication required. Click the Menu icon in the upper left.
2. Tap Video from the available menu. Then tap the Gear icon.
3. Tap Recording Rules
4. Create or Edit Rule. You can either click the pencil icon to add this feature to an existing Video Analytics rule for a compatible camera, or you can Add a new rule. To see how to create a rule using Video Analytics, check out this informative FAQ. Verify that the initial Video Analytics settings are properly configured, then click Next.
5. Choose response. In the Activates section choose the audible and visible response desired:
   
   • Camera LED response. Click to toggle the Camera Status LED to Enabled if you want the LED to respond when activity is detected. There is a Duration drop-down, select how long you want the LED response to last.
   • Camera Audio Alert. This option is only available on cameras using the 2-Way Audio feature. Click the Camera Audio Alert toggle to enable an Audio Alert. There is an Audio Sound dropdown menu. Select the type of sound you want the camera to make.
6. Tap Save

It's that simple! Once you have this configured, using the advanced video analytics available through Alarm.com, the rule will take care of itself. The idea is that the flashing LED and the audible sounder will scare away an intruder before they ever make it to your home. It's a pound of prevention to ward off a ton of regret.

What do you think about this Alarm.com feature? Have you used it and had experience with it? Do you think it's something you'd like to give a try? Leave a comment below and let us know what you think. We love to hear from our readers.

Alarm Grid has obtained an extremely limited supply of the brand new Resideo IPCAM-WOC2 WIFI, outdoor, 1080p camera, compatible with Total Connect 2.0. After the announcement in March, 2021 that the IPCAM-WOC1 was discontinued, Resideo and Honeywell Home were left with no outdoor camera option.

Our blog in March announced that the Honeywell IPCAM-WOC1 would be discontinued. At the time, we didn't know why the camera was being discontinued. There wasn't a lot of information available then about why it was discontinued, or whether there would ever be a replacement. With Alarm.com releasing new variations of their cameras at a fast and furious pace, we were left to wonder what Resideo was thinking.

In July, 2021, we passed on to our readers that either the IPCAM-WOC1 (also sometimes referred to as the Lyric OC1) would make a return, or if not a return, that it would possibly be replaced with something very similar. It came to light that the reason the outdoor camera had been discontinued in the first place was that certain components involved in its production were no longer being produced.

Resideo was unable to source those same components elsewhere, so they are preparing to release the IPCAM-WOC2. This camera is technically not even released yet, so we don't have official documentation, with the exception of a Quick Install Guide, which frankly, contains several errors. For starters, we know for a fact that the image of the camera and its components used in the guide is incorrect. This document, much like the camera itself, will soon be receiving a face lift.

Some of the things that we know are updated in the IPCAM-WOC2, as compared to the IPCAM-WOC1 are: The Bluetooth Antenna is internal on the IPCAM-WOC2. It was external (part of the big wiring bundle) on the IPCAM-WOC1. The WOC2 will support Audio Analytics, with intelligent sound detection. The WOC1 did not support audio. The IPCAM-WOC2 comes with a 16 GB MicroSD card pre-installed, the IPCAM-WOC1 came with a 8 GB card. These are just a few things that we know about, when the full specs are released, we will update our product description with the full gamut of features and specifications.

If you've been waiting to get your hands on an outdoor 1080p camera that's compatible with Total Connect 2.0, now is your chance to pick one up. Given all the supply chain issues revolving around the global chip shortage, this is one of a handful of products that we know is currently in stock. But you had better hurry, because supplies are extremely limited. Once the units we have in stock are gone, we will likely have to wait for the full product release before we can offer any more.

Alarm Grid has obtained an extremely limited supply of the brand new Resideo IPCAM-WOC2 WIFI, outdoor, 1080p camera, compatible with Total Connect 2.0. After the announcement in March, 2021 that the IPCAM-WOC1 was discontinued, Resideo and Honeywell Home were left with no outdoor camera option.

Our blog in March announced that the Honeywell IPCAM-WOC1 would be discontinued. At the time, we didn't know why the camera was being discontinued. There wasn't a lot of information available then about why it was discontinued, or whether there would ever be a replacement. With Alarm.com releasing new variations of their cameras at a fast and furious pace, we were left to wonder what Resideo was thinking.

In July, 2021, we passed on to our readers that either the IPCAM-WOC1 (also sometimes referred to as the Lyric OC1) would make a return, or if not a return, that it would possibly be replaced with something very similar. It came to light that the reason the outdoor camera had been discontinued in the first place was that certain components involved in its production were no longer being produced.

Resideo was unable to source those same components elsewhere, so they are preparing to release the IPCAM-WOC2. This camera is technically not even released yet, so we don't have official documentation, with the exception of a Quick Install Guide, which frankly, contains several errors. For starters, we know for a fact that the image of the camera and its components used in the guide is incorrect. This document, much like the camera itself, will soon be receiving a face lift.

Some of the things that we know are updated in the IPCAM-WOC2, as compared to the IPCAM-WOC1 are: The Bluetooth Antenna is internal on the IPCAM-WOC2. It was external (part of the big wiring bundle) on the IPCAM-WOC1. The WOC2 will support Audio Analytics, with intelligent sound detection. The WOC1 did not support audio. The IPCAM-WOC2 comes with a 16 GB MicroSD card pre-installed, the IPCAM-WOC1 came with a 8 GB card. These are just a few things that we know about, when the full specs are released, we will update our product description with the full gamut of features and specifications.

If you've been waiting to get your hands on an outdoor 1080p camera that's compatible with Total Connect 2.0, now is your chance to pick one up. Given all the supply chain issues revolving around the global chip shortage, this is one of a handful of products that we know is currently in stock. But you had better hurry, because supplies are extremely limited. Once the units we have in stock are gone, we will likely have to wait for the full product release before we can offer any more.

The new ADC-V724 is the first camera from Alarm.com to offer 2-Way Audio in addition to 1080p HDR video, and IR night vision. With the integrated mic and speaker, you could easily have some fun with the neighborhood trick-or treaters while still protecting your property from vandals.

We all know that house in the neighborhood where the owners go all-out for Halloween. In some cases, it's like a haunted house attraction where, instead of having to pay to get in, you get candy if you're brave enough to get to the door. The Alarm.com ADC-V724 could help you make your house the one everybody's talking about this year!

Don't get me wrong, this camera is great all year. It just happens that it's being released at this time of year, which is fortuitous. Because, maybe you're not that house, maybe you're the other house. The one where the inhabitants turn all the lights off and pretend not to be home because they forgot to buy candy. Maybe you're in for some tricks because you don't have any treats. Well, the ADC-V724 has you covered there too. With one of these installed, you can sit inside and watch your property. If anyone shows up to play tricks, you can politely tell them through the camera that they should skip your house.

The ADC-V724 has an improved mount over previous versions of Alarm.com cameras, for better long-term stability. It also has an easier to reach Micro SD card slot, in the event you want to take advantage of the Onboard Recording feature. The minimum capacity for a Micro SD card is 32GB, maximum is 512 GB. No Micro SD card is included with the camera. It also allows you to take advantage of the full suite of Alarm.com Video Analytics, which is a powerful tool for eliminating unwarranted video captures. The ADC-V724 offers High Dynamic Range (HDR) for better light/dark contrast in low-light environments, and can work with either 2.4 GHz or 5 GHz WIFI. With the built-in microphone, audio is included in recorded clips. When it comes to providing evidence to the police, audio is often just as important to them as video evidence, so this is a great added feature.

The speaker and Micro SD card slot can be seen in this image:

What do you think about the Alarm.com ADC-V724? Are you in the market for new indoor/outdoor cameras? Will you be going all-out for Halloween, are you the house with no candy, or somewhere in-between? Leave a comment below and let us know what you think. If there's something you'd like to see us cover in our blog, you can let us know that as well. See you next time, until then as always, stay safe!

The new ADC-V724 is the first camera from Alarm.com to offer 2-Way Audio in addition to 1080p HDR video, and IR night vision. With the integrated mic and speaker, you could easily have some fun with the neighborhood trick-or treaters while still protecting your property from vandals.

We all know that house in the neighborhood where the owners go all-out for Halloween. In some cases, it's like a haunted house attraction where, instead of having to pay to get in, you get candy if you're brave enough to get to the door. The Alarm.com ADC-V724 could help you make your house the one everybody's talking about this year!

Don't get me wrong, this camera is great all year. It just happens that it's being released at this time of year, which is fortuitous. Because, maybe you're not that house, maybe you're the other house. The one where the inhabitants turn all the lights off and pretend not to be home because they forgot to buy candy. Maybe you're in for some tricks because you don't have any treats. Well, the ADC-V724 has you covered there too. With one of these installed, you can sit inside and watch your property. If anyone shows up to play tricks, you can politely tell them through the camera that they should skip your house.

The ADC-V724 has an improved mount over previous versions of Alarm.com cameras, for better long-term stability. It also has an easier to reach Micro SD card slot, in the event you want to take advantage of the Onboard Recording feature. The minimum capacity for a Micro SD card is 32GB, maximum is 512 GB. No Micro SD card is included with the camera. It also allows you to take advantage of the full suite of Alarm.com Video Analytics, which is a powerful tool for eliminating unwarranted video captures. The ADC-V724 offers High Dynamic Range (HDR) for better light/dark contrast in low-light environments, and can work with either 2.4 GHz or 5 GHz WIFI. With the built-in microphone, audio is included in recorded clips. When it comes to providing evidence to the police, audio is often just as important to them as video evidence, so this is a great added feature.

The speaker and Micro SD card slot can be seen in this image:

What do you think about the Alarm.com ADC-V724? Are you in the market for new indoor/outdoor cameras? Will you be going all-out for Halloween, are you the house with no candy, or somewhere in-between? Leave a comment below and let us know what you think. If there's something you'd like to see us cover in our blog, you can let us know that as well. See you next time, until then as always, stay safe!

We have a quick tip today for users setting up Notifications on Total Connect 2.0, specifically regarding Notification Triggers for IP cameras. The HD cameras offer a much more diverse selection of Notification Triggers than legacy cameras, which have "Video Events" as their only option.

If you are not familiar with Total Connect 2.0 Text and Email Notifications, then the term "Notification Triggers" is used to identify the action(s) that cause text and/or email alerts to be sent to designated users. In the case of security cameras, you will likely want to be notified if your camera records a video clip. That way, you will know to check out the clip and make sure that everything is alright.

However, the selection of Notification Triggers is much wider if you are working with an HD camera versus and older legacy camera. For an HD camera, you can choose specific types of video captures for notifications, while leaving other types of video captures off the trigger list so that you aren't necessarily notified for every type of camera recording. For instance, you might want to be notified if your camera records a clip for an alarm event or due to detecting motion, but not if your camera begins recording due to sound-based detection.

Note the available selections in the list below. You can pick and choose which of these notifications you want to use with your Total Connect 2.0 HD camera, and which ones you do not. If you choose all eight (8), then it will essentially serve as the greyed out "Video Events" option, which is the only viable option when using legacy cameras.

But as you will notice for legacy cameras, only "Video Events" can be selected as the Notification Trigger. This is pretty much a cover-all option that includes all the individually selectable options that you would have for an HD camera. In other words, if you want to set up Notifications for any legacy cameras, then you will have to make it so that any and all camera activity will trigger a notification. For that reason, it is extra important that you adjust the sensitivity levels for your legacy cameras so that you aren't bombarded by alerts!

For reference, the only HD cameras used with Total Connect 2.0 are the Honeywell IPCAM-WIC1, the Honeywell IPCAM-WIC2, and the discontinued Honeywell IPCAM-WOC1. All other IP cameras used with TC2 are legacy devices. There is hope and speculation that Resideo (formerly Honeywell) will unveil some new HD cameras at upcoming ISC West 2021, but that is a story for another time.

This doesn't mean that if you mix and match legacy and HD cameras on a single TC2 account that you are restricted to "Video Events" for your Notification Triggers. You can create separate sets of notifications as needed so that you have fully customized alerts for your HD cameras, plus the "Video Events" Notifications set up for your legacy cameras.

Don't forget that Total Connect 2.0 allows you to have up to eight (8) HD cameras per account, plus a maximum of six (6) legacy cameras. You may want to refer to this helpful FAQ for more information on Total Connect 2.0 Clip Limits. We know that it can be a bit confusing regarding all the separate rules for HD vs legacy cameras on Total Connect 2.0, so definitely refer to that guide if you need a refresher!

Also, make sure to read our complete guide to setting up Total Connect 2.0 Notifications. That will show you exactly how to create TC2 Notifications the way you want so that you and those around you are properly alerted to events and activity on your security system, which includes any security cameras you have set up. Don't forget to leave a comment down below with your thoughts on Total Connect 2.0 Notifications and Alerts. We're very interested to hear what you have to say. And remember to stay tuned to the Alarm Grid Blog for more security content, news, and tips coming soon!

We have a quick tip today for users setting up Notifications on Total Connect 2.0, specifically regarding Notification Triggers for IP cameras. The HD cameras offer a much more diverse selection of Notification Triggers than legacy cameras, which have "Video Events" as their only option.

If you are not familiar with Total Connect 2.0 Text and Email Notifications, then the term "Notification Triggers" is used to identify the action(s) that cause text and/or email alerts to be sent to designated users. In the case of security cameras, you will likely want to be notified if your camera records a video clip. That way, you will know to check out the clip and make sure that everything is alright.

However, the selection of Notification Triggers is much wider if you are working with an HD camera versus and older legacy camera. For an HD camera, you can choose specific types of video captures for notifications, while leaving other types of video captures off the trigger list so that you aren't necessarily notified for every type of camera recording. For instance, you might want to be notified if your camera records a clip for an alarm event or due to detecting motion, but not if your camera begins recording due to sound-based detection.

Note the available selections in the list below. You can pick and choose which of these notifications you want to use with your Total Connect 2.0 HD camera, and which ones you do not. If you choose all eight (8), then it will essentially serve as the greyed out "Video Events" option, which is the only viable option when using legacy cameras.

But as you will notice for legacy cameras, only "Video Events" can be selected as the Notification Trigger. This is pretty much a cover-all option that includes all the individually selectable options that you would have for an HD camera. In other words, if you want to set up Notifications for any legacy cameras, then you will have to make it so that any and all camera activity will trigger a notification. For that reason, it is extra important that you adjust the sensitivity levels for your legacy cameras so that you aren't bombarded by alerts!

For reference, the only HD cameras used with Total Connect 2.0 are the Honeywell IPCAM-WIC1, the Honeywell IPCAM-WIC2, and the discontinued Honeywell IPCAM-WOC1. All other IP cameras used with TC2 are legacy devices. There is hope and speculation that Resideo (formerly Honeywell) will unveil some new HD cameras at upcoming ISC West 2021, but that is a story for another time.

This doesn't mean that if you mix and match legacy and HD cameras on a single TC2 account that you are restricted to "Video Events" for your Notification Triggers. You can create separate sets of notifications as needed so that you have fully customized alerts for your HD cameras, plus the "Video Events" Notifications set up for your legacy cameras.

Don't forget that Total Connect 2.0 allows you to have up to eight (8) HD cameras per account, plus a maximum of six (6) legacy cameras. You may want to refer to this helpful FAQ for more information on Total Connect 2.0 Clip Limits. We know that it can be a bit confusing regarding all the separate rules for HD vs legacy cameras on Total Connect 2.0, so definitely refer to that guide if you need a refresher!

Also, make sure to read our complete guide to setting up Total Connect 2.0 Notifications. That will show you exactly how to create TC2 Notifications the way you want so that you and those around you are properly alerted to events and activity on your security system, which includes any security cameras you have set up. Don't forget to leave a comment down below with your thoughts on Total Connect 2.0 Notifications and Alerts. We're very interested to hear what you have to say. And remember to stay tuned to the Alarm Grid Blog for more security content, news, and tips coming soon!

Welcome back from 4th of July! We have had a busy past couple of weeks at Alarm Grid since our last video recap. This time, we have seven (7) new videos to show you, including five (5) with Jorge and two with myself. We cover the PROA7PLUS, 2GIG Edge Cameras, and 2GIG GC2 Firmware Updates!

2GIG Edge: Alarm.com Cameras that Support Live Streaming

Jorge explains which Alarm.com Security Cameras can be streamed directly to a 2GIG Edge Alarm Panel. Most of the newer Alarm.com Cameras can be used in this way. In order for this to work, a camera must be paired with the same Alarm.com account used with the 2GIG Edge, and it must be enabled for panel streaming from the Alarm.com website or mobile app. Cameras can be streamed from the Smart Home Menu on the 2GIG Edge.

2GIG Edge: Alarm.com Cameras that Support 2-Way Audio via Live-Streaming

Jorge teaches users about two-way audio playback when live-streaming security cameras on the 2GIG Edge. While nearly all Alarm.com Cameras can be used for video streaming on the 2GIG Edge, only a smaller selection of cameras can be used for live audio streaming. Really, it's mostly the indoor residential cameras that do audio streaming. Most of the Alarm.com Commercial Cameras that support Power over Ethernet (PoE) and all Alarm.com Outdoor Cameras do not support two-way audio, as they typically do not have built-in microphones.

2GIG Easy Updater Tool: Updating

Jorge explains how to update the 2GIG UPDV Easy Updater Tool that is used to update the firmware on a 2GIG Go!Control GC2 Security System. The Easy Updater Tool contains the firmware update for the GC2 System. If the firmware on the Updater Tool is outdated, then you must update the Updater Tool by following the process outlined in this video. The current downloaded firmware on the Updater Tool will be displayed across the device screen when power is applied. This will let you know if you need to updater the Updater Tool.

2GIG GC2: Updating Using the Easy Updater Tool

Jorge teaches you how to use the 2GIG UPDV Easy Updater Tool to update the firmware on a 2GIG Go!Control GC2 Alarm Panel. After you have updated the firmware on the Updater Tool itself, you can then use the device to update the firmware on the GC2 Panel. Updating to the latest firmware version will ensure that you can use all of the released features for the system and that all of the latest hardware is supported. The LTE communicators for activating with Alarm.com and alarm monitoring will require a certain firmware version.

Honeywell Home PROA7PLUS: Delete a Zone

Jorge shows you how to delete a zone on a Honeywell Home PROA7PLUS or other ProSeries Alarm System. When you delete a zone, the associated sensor will no longer be programmed with the system. You would need to re-enroll it in order to continue using it. For the encrypted PROSIX Sensors and SiX Sensors, after deleting the sensor, you will then be able to enroll it with a new ProSeries Panel, provided that the sensor received the deletion signal from the panel. When deleting PROSIX and SiX Sensors, be sure the sensor is powered on and within range of the ProSeries Panel at the time of deletion.

Honeywell Home PROA7PLUS: Add a User Code

I show you how to add a new user code to a Honeywell Home PROA7PLUS Alarm System or other ProSeries Panel. All of the ProSeries Systems support up to (96) total user codes, so you should have no trouble giving everyone in your household or office their very own code to use when controlling the system. After you have added a user code, you can then go back into user settings to configure automatic Bluetooth disarming and Z-Wave lock functionality for the user.

Honeywell Home PROA7PLUS: Clear a Tamper Error

I show you how to clear a tamper error on a Honeywell Home PROA7PLUS or other ProSeries Security Controller. A tamper error occurs when the red tamper button on the back of the ProSeries Controller isn't held down properly. This is usually because the system has been taken off its backplate, or it isn't mounted on its backplate properly. Once you get the panel back on the backplate, you can then acknowledge the tamper condition by entering the system's Master Code when prompted.

Welcome back from 4th of July! We have had a busy past couple of weeks at Alarm Grid since our last video recap. This time, we have seven (7) new videos to show you, including five (5) with Jorge and two with myself. We cover the PROA7PLUS, 2GIG Edge Cameras, and 2GIG GC2 Firmware Updates!

2GIG Edge: Alarm.com Cameras that Support Live Streaming

Jorge explains which Alarm.com Security Cameras can be streamed directly to a 2GIG Edge Alarm Panel. Most of the newer Alarm.com Cameras can be used in this way. In order for this to work, a camera must be paired with the same Alarm.com account used with the 2GIG Edge, and it must be enabled for panel streaming from the Alarm.com website or mobile app. Cameras can be streamed from the Smart Home Menu on the 2GIG Edge.

2GIG Edge: Alarm.com Cameras that Support 2-Way Audio via Live-Streaming

Jorge teaches users about two-way audio playback when live-streaming security cameras on the 2GIG Edge. While nearly all Alarm.com Cameras can be used for video streaming on the 2GIG Edge, only a smaller selection of cameras can be used for live audio streaming. Really, it's mostly the indoor residential cameras that do audio streaming. Most of the Alarm.com Commercial Cameras that support Power over Ethernet (PoE) and all Alarm.com Outdoor Cameras do not support two-way audio, as they typically do not have built-in microphones.

2GIG Easy Updater Tool: Updating

Jorge explains how to update the 2GIG UPDV Easy Updater Tool that is used to update the firmware on a 2GIG Go!Control GC2 Security System. The Easy Updater Tool contains the firmware update for the GC2 System. If the firmware on the Updater Tool is outdated, then you must update the Updater Tool by following the process outlined in this video. The current downloaded firmware on the Updater Tool will be displayed across the device screen when power is applied. This will let you know if you need to updater the Updater Tool.

2GIG GC2: Updating Using the Easy Updater Tool

Jorge teaches you how to use the 2GIG UPDV Easy Updater Tool to update the firmware on a 2GIG Go!Control GC2 Alarm Panel. After you have updated the firmware on the Updater Tool itself, you can then use the device to update the firmware on the GC2 Panel. Updating to the latest firmware version will ensure that you can use all of the released features for the system and that all of the latest hardware is supported. The LTE communicators for activating with Alarm.com and alarm monitoring will require a certain firmware version.

Honeywell Home PROA7PLUS: Delete a Zone

Jorge shows you how to delete a zone on a Honeywell Home PROA7PLUS or other ProSeries Alarm System. When you delete a zone, the associated sensor will no longer be programmed with the system. You would need to re-enroll it in order to continue using it. For the encrypted PROSIX Sensors and SiX Sensors, after deleting the sensor, you will then be able to enroll it with a new ProSeries Panel, provided that the sensor received the deletion signal from the panel. When deleting PROSIX and SiX Sensors, be sure the sensor is powered on and within range of the ProSeries Panel at the time of deletion.

Honeywell Home PROA7PLUS: Add a User Code

I show you how to add a new user code to a Honeywell Home PROA7PLUS Alarm System or other ProSeries Panel. All of the ProSeries Systems support up to (96) total user codes, so you should have no trouble giving everyone in your household or office their very own code to use when controlling the system. After you have added a user code, you can then go back into user settings to configure automatic Bluetooth disarming and Z-Wave lock functionality for the user.

Honeywell Home PROA7PLUS: Clear a Tamper Error

I show you how to clear a tamper error on a Honeywell Home PROA7PLUS or other ProSeries Security Controller. A tamper error occurs when the red tamper button on the back of the ProSeries Controller isn't held down properly. This is usually because the system has been taken off its backplate, or it isn't mounted on its backplate properly. Once you get the panel back on the backplate, you can then acknowledge the tamper condition by entering the system's Master Code when prompted.