Lyric Firmware Update MR9 Now Available
Posted By Michael GorisHi DIYers! We are very happy to announce that software revision 1.09 is now available for the Resideo Lyric Security System. This software revision is more commonly known as firmware update MR9, and it can be downloaded for free by any end user with active alarm monitoring service.
The biggest addition that comes from firmware update MR9 is support for the upcoming Verizon LTE Communicator. We expect this communicator to be released sometime later this summer. Support for the existing AT&T LTE Communicator is also carried over to MR9. The update can be pushed down from the Resideo AlarmNet Servers and is completely free of charge. In order for the update to take effect, the system must be disarmed, with no trouble conditions present.
If you want to apply the update yourself when the system is disarmed, you can do so by entering the following commands from the main Lyric screen: Security > Tools > Installer Code (default 4112) > Update Firmware. The button will grey out to confirm that it was selected. Then return to the home screen using the return arrow in the upper-right corner. The update process should begin automatically.
Depending on the speed of the communication path, the update process can take anywhere from a few minutes to up to an hour. The system will then reboot to apply the update. If you want to confirm the update, go to Security > Tools > Master Code (default 1234) > Advanced > System Information. The listed Revision on the top line should start with 1.09.
If you want more information about the MR9 update, please check the associated release notes. If you have any further questions about the MR9 update, please reach out to us. The best way to reach us is to email support@alarmgrid.com. We look forward to hearing from you!
