Interlogix Panels to Receive Alarm.com Firmware Updates
Posted By Michael GorisIf you use an Interlogix Alarm System with Alarm.com, then you can expect a firmware update for your system's LTE communicator. The firmware update will be automatic, and no action will need to be taken. Interlogix Simon Panels, NetworX Panels, and Concord4 Panels will receive the update.
If you haven't upgraded to an LTE communicator yet, then make sure to do so as soon as possible. The 3G Sunset is going to occur on January 31st, 2022 for AT&T and December 31st for Verizon. If you are not aware of the 3G sunset, then please read this blog to get acquainted. This upgrade is very important to ensure that you do not experience a loss of service.
We want to mention that each firmware update is just a general update designed to improve the user experience. Each update is being pushed down automatically, at no cost to the user. No action is needed on your end, just have your system online and connected with the Alarm.com servers, and everything will be taken care of.
Please note the update according to your Interlogix System:
- Interlogix Concord4 - Firmware Update 189d
- Interlogix NetworX - Firmware Update 189a
- Interlogix Simon XT, XTi, XTi-5, XTi-5i - Firmware Update 191f
Additionally, if you use a Honeywell VISTA System with an Alarm.com SEM (not AlarmNet or Total Connect 2.0), then you will also be getting a pair of automatic system updates. All VISTA Systems using Alarm.com SEMs will receive the SEM VISTA 187i Upgrade and the 1.61 Firmware Upgrade. Again, both updates are automatic, and they are being provided at zero cost.
That's all the news for now. If you have any of the aforementioned systems on Alarm.com, then you can expect the automatic firmware update. If you are monitored by Alarm Grid and you are having any trouble with your system, please email support@alarmgrid.com. Please keep in mind our usual business hours of 9am to 8pm ET M-F.