Alarm.com ADC-SEM100-LTE Posts

If you use an Interlogix Alarm System with Alarm.com, then you can expect a firmware update for your system's LTE communicator. The firmware update will be automatic, and no action will need to be taken. Interlogix Simon Panels, NetworX Panels, and Concord4 Panels will receive the update.

If you haven't upgraded to an LTE communicator yet, then make sure to do so as soon as possible. The 3G Sunset is going to occur on January 31st, 2022 for AT&T and December 31st for Verizon. If you are not aware of the 3G sunset, then please read this blog to get acquainted. This upgrade is very important to ensure that you do not experience a loss of service.

We want to mention that each firmware update is just a general update designed to improve the user experience. Each update is being pushed down automatically, at no cost to the user. No action is needed on your end, just have your system online and connected with the Alarm.com servers, and everything will be taken care of.

Please note the update according to your Interlogix System:

• Interlogix Concord4 - Firmware Update 189d
• Interlogix NetworX - Firmware Update 189a
• Interlogix Simon XT, XTi, XTi-5, XTi-5i - Firmware Update 191f

Additionally, if you use a Honeywell VISTA System with an Alarm.com SEM (not AlarmNet or Total Connect 2.0), then you will also be getting a pair of automatic system updates. All VISTA Systems using Alarm.com SEMs will receive the SEM VISTA 187i Upgrade and the 1.61 Firmware Upgrade. Again, both updates are automatic, and they are being provided at zero cost.

That's all the news for now. If you have any of the aforementioned systems on Alarm.com, then you can expect the automatic firmware update. If you are monitored by Alarm Grid and you are having any trouble with your system, please email support@alarmgrid.com. Please keep in mind our usual business hours of 9am to 8pm ET M-F.

We have learned that there is a new firmware update available for Alarm.com Honeywell VISTA SEM Communicators. Firmware Upgrade Version 1.61 is a free over-the-air (OTA) upgrade to ensure that SEM VISTA Panels running 187h or 187i firmware and 1.60 gateway firmware have the newest features.

In order to receive Firmware Upgrade Version 1.61, it must be pushed down manually by your alarm monitoring company. Your Honeywell VISTA Alarm System must be in a disarmed state in order for the update to go through. It is recommended that the system be kept in a disarmed state while the upgrade is completed. The entire process should take roughly 20 to 40 minutes. No action is needed while the update is being performed.

If you are an Alarm Grid monitored customer with a Honeywell VISTA System using an Alarm.com SEM Communicator, then you should email us to request the update. The best email to contact us at is support@alarmgrid.com. This is also a good email to use if you have a Honeywell VISTA Security System or any other alarm system that you are hoping to get monitored. We're here to check your emails from 9am to 8pm ET M-F. We look forward to hearing from you!

As the sunset for 3G cellular networks is quickly approaching, Alarm Grid has some important news regarding support for Verizon's 3G CDMA network. This news affects both the Alarm.com service and Honeywell's AlarmNet server.

As of today, June 1st, 2018, Verizon will no longer activate Alarm.com CDMA cellular communicator SIM cards as they prepare for their CDMA network sunset. If the Verizon SIM card is already activated, which is done during manufacturing, Alarm.com will still allow the account activation to go through.

However, if a communicator is manufactured and never activated with Alarm.com, or if it's activated with Alarm.com but then cancelled, the Verizon SIM will eventually become deactivated. Therefore, it's possible that a CDMA module you already have won't be able to be used if it's not currently active with Alarm.com.

If you have an existing Alarm.com CDMA communicator with a different monitoring company, it can still be "recycled" and brought over to a new alarm company, as long as the communicator is re-activated with the new monitoring company soon after it's cancelled by the existing monitoring company.

Any existing Alarm.com CDMA communicator that is already active with Alarm.com will continue to work for the time being, but will be sunsetting soon.

If you need to purchase a new cellular communicator for an Alarm.com panel, we recommend one of the following Verizon LTE options:

For 2GIG GC3:

• 2GIG LTEV-A-GC3 (requires GC3 Firmware 3.0.2 or higher) (discontinued)
• 2GIG LTEV1-A-GC3 (requires GC3 Firmware 3.1.3 or higher)

For more information on GC3 Firmware Updates, please click here. Also see this guide to upgrade the GC3 communicator.

For 2GIG GC2:

• 2GIG LTEV-A-GC2 (requires GC2 Firmware 1.17 or higher) (discontinued)
• 2GIG LTEV1-A-GC2 (requires GC2 Firmware 1.19 or higher)

For more information on GC2 Firmware Updates, please click here. Also see this guide to upgrade the GC2 communicator. You can also review the FAQs 2GIG GC2 Firmware Update Instructions Using UPCBL2 and How to Upgrade GC2 Firmware Using a Cable for more information.

Starting June 30th, 2018, Honeywell AlarmNet CDMA cellular communicators that were manufactured before March 1st, 2018 can no longer be activated. If you have an AlarmNet CDMA communicator that was manufactured before this date, you must activate it by June 30th.

At that time, it will also be impossible to bring a Honeywell CDMA radio from one monitoring company to another. AlarmNet CDMA communicators that were manufactured after March 1st, 2018 can be activated until December 22nd, 2018. Any AlarmNet CDMA communicator that has already been activated will continue to work until the CDMA network is shutdown.

If you need to purchase a new cellular communicator for a Honeywell Alarm System, we suggest buying an LTE module. Alarm Grid recommends the following options based on system type:

Honeywell Lyric Controller: LYRICLTE-V supports Verizon LTE

Honeywell L5210 and L7000 (Firmware 9+): LTE-L57V supports Verizon LTE

Honeywell VISTA Systems: LTE-XV supports Verizon LTE or LTE-IV supports Verizon LTE & IP

Additionally, if you have a CDMA communicator that has not been activated, you will no longer be able to return it to Alarm Grid for a refund. We will not be taking any CDMA returns as of today. Our company stopped selling CDMA communicators roughly three months ago, and we have been preparing for the 3G sunset for quite some time.

Cellular service providers have already discontinued support for their 2G networks, and they are currently preparing to do the same for their 3G networks. This includes the Verizon 3G CDMA network. Instead, cellular service providers are shifting their focus to their newer and more advanced 4G and LTE networks. If you need to upgrade an alarm system to cellular, you should purchase an LTE module if possible.

Remember, existing CDMA communicators that have already been activated can still be used for the time being. These modules will continue to work until the CDMA network is discontinued. At that point, any CDMA cellular module will need to be replaced and upgraded to a newer communicator.

If you have any questions about this news, please send an email to support@alarmgrid.com. You may also call us at 888-818-7728 from 9am to 8pm EST M-F.

Edit (6/8/18): This blog post previously stated that as of June 1st, no Alarm.com CDMA module that wasn't currently active with Alarm.com service could be activated on a new Alarm.com account, which has changed since it was written. It has been edited to reflect the correct information.

When we launched Alarm Grid in 2012, we sold Honeywell equipment exclusively. We have been very slow to grow our selection because their products have proved to be so reliable. We absolutely love Honeywell. And while we're proud to have expanded our offerings to 2GIG systems and Simon communicators, our primary offering continues to be Honeywell focused.

Last year, when we added 2GIG's systems to our offerings, we also launched alarm.com at the same time. While Honeywell's products have always been coupled tightly with AlarmNet's interactive offering, Alarm.com powers the interactive services for most of the other brands. And while we believe strongly in the Total Connect product, Alarm.com has done an amazing job of offering a bit more flexibility to their offering meaning that a lot of end users prefer the Alarm.com software.

So what's a DIYer to do if they want Honeywell hardware and Alarm.com software?

Alarm.com has just released the System Enhancement Module (SEM) which allows end users to attach the unit to their wired Honeywell system (e.g. VISTA 20P, VISTA 15P) and use the Alarm.com software. Significantly cheaper than the Total Connect communicator the iGSMV4G or GSMV4G, the SEM gives the systems cellular monitoring capabilities to anyone who wants them. Additionally, the SEM provides more options to end users regarding their choice of network, currently available for LTE and CDMA.

What's more, the SEM gives end users the ability to take advantage of some incredible Z-Wave functionality that previously would have required the purchase of the VAM or the Tuxedo. Simply, for a cost of $155.99, an end user can now take advantage of everything these systems have to offer.