Honeywell IPCAM-WICEXT Posts

We have a quick tip today for users setting up Notifications on Total Connect 2.0, specifically regarding Notification Triggers for IP cameras. The HD cameras offer a much more diverse selection of Notification Triggers than legacy cameras, which have "Video Events" as their only option.

If you are not familiar with Total Connect 2.0 Text and Email Notifications, then the term "Notification Triggers" is used to identify the action(s) that cause text and/or email alerts to be sent to designated users. In the case of security cameras, you will likely want to be notified if your camera records a video clip. That way, you will know to check out the clip and make sure that everything is alright.

However, the selection of Notification Triggers is much wider if you are working with an HD camera versus and older legacy camera. For an HD camera, you can choose specific types of video captures for notifications, while leaving other types of video captures off the trigger list so that you aren't necessarily notified for every type of camera recording. For instance, you might want to be notified if your camera records a clip for an alarm event or due to detecting motion, but not if your camera begins recording due to sound-based detection.

Note the available selections in the list below. You can pick and choose which of these notifications you want to use with your Total Connect 2.0 HD camera, and which ones you do not. If you choose all eight (8), then it will essentially serve as the greyed out "Video Events" option, which is the only viable option when using legacy cameras.

But as you will notice for legacy cameras, only "Video Events" can be selected as the Notification Trigger. This is pretty much a cover-all option that includes all the individually selectable options that you would have for an HD camera. In other words, if you want to set up Notifications for any legacy cameras, then you will have to make it so that any and all camera activity will trigger a notification. For that reason, it is extra important that you adjust the sensitivity levels for your legacy cameras so that you aren't bombarded by alerts!

For reference, the only HD cameras used with Total Connect 2.0 are the Honeywell IPCAM-WIC1, the Honeywell IPCAM-WIC2, and the discontinued Honeywell IPCAM-WOC1. All other IP cameras used with TC2 are legacy devices. There is hope and speculation that Resideo (formerly Honeywell) will unveil some new HD cameras at upcoming ISC West 2021, but that is a story for another time.

This doesn't mean that if you mix and match legacy and HD cameras on a single TC2 account that you are restricted to "Video Events" for your Notification Triggers. You can create separate sets of notifications as needed so that you have fully customized alerts for your HD cameras, plus the "Video Events" Notifications set up for your legacy cameras.

Don't forget that Total Connect 2.0 allows you to have up to eight (8) HD cameras per account, plus a maximum of six (6) legacy cameras. You may want to refer to this helpful FAQ for more information on Total Connect 2.0 Clip Limits. We know that it can be a bit confusing regarding all the separate rules for HD vs legacy cameras on Total Connect 2.0, so definitely refer to that guide if you need a refresher!

Also, make sure to read our complete guide to setting up Total Connect 2.0 Notifications. That will show you exactly how to create TC2 Notifications the way you want so that you and those around you are properly alerted to events and activity on your security system, which includes any security cameras you have set up. Don't forget to leave a comment down below with your thoughts on Total Connect 2.0 Notifications and Alerts. We're very interested to hear what you have to say. And remember to stay tuned to the Alarm Grid Blog for more security content, news, and tips coming soon!