Honeywell T6 Pro WIFI Posts

ConEd

As we've reported before, Alarm.com partners with electrical power providers all over the country in a demand response program called Give Back Get Back. In exchange for allowing your participating provider to adjust your thermostat slightly during peak demand hours, you receive a bonus.

According to Alarm.com, there are typically between six (6) and ten (10) peak events per summer season. Customers who opt into this program in their area will receive advance notice of any adjustment that is planned for their location. They have the ability to opt-out of a particular event, or the entire program, at any time. The most recent additions to the Give Back Get Back program are:

AEP PSO of Oklahoma

AEP PSO calls this program PSO's Power Hours program. In order to be eligible, you must be a PSO residential customer and the electric service must be in your name. You must have an eligible internet-connected smart thermostat controlling your central air conditioning. And you must agree to allow PSO to make brief, small adjustments to your thermostat during Peak Events on high demand days.

As an incentive, you will receive a $50 e-gift card per eligible device, once you have successfully enrolled that device into the program. This e-gift card will arrive within 60 days of your acceptance in the program. It will be sent to the email address used to register for the program so be sure you enter your email address correctly when signing up! At the end of the summer season, starting in 2022, you will receive a $25 e-gift card per participating thermostat. If you are enrolled in AEP PSO Oklahoma's Time-of-Day (TOD) rate option, you can also participate in the Power Hours Program.

Qualifying Thermostats:

ConEd

By enrolling in ConEd's program in 2022, customers earn a chance to win a $5,000 prize. ConEd calls their program Power Savers. To be eligible to participate, you must be a resident of New York with an electric utility account, you must use your thermostat to control central air conditioning, and you must have installed an eligible thermostat. Note that the list of eligible thermostats is quite a bit smaller for ConEd.

Qualifying Thermostats:

AEP ApCo Virginia

With AEP ApCo, Appalachian Power Virginia, enrolled customers receive a $50 e-gift card upon enrollment and acceptance into the program. In addition, customers can earn up to $25 in e-gift cards at the end of the season ($5 for each summer month of participation from May - September).

To be eligible to enroll, you must be an Appalachian Power, VA residential electric customer, and the electrical service must be in your name. Once you install an eligible inter-connected smart thermostat for your central air conditioning system and sign up to allow Appalachian Power to make brief, small adjustments to your thermostat on days of high energy demand, you will receive your e-gift card. It should arrive within 60 days of being accepted into the program. The e-gift card will be sent to the email address used to register your thermostat, so be sure you enter your email address correctly, then be on the lookout for your gift card!

Qualifying Thermostats:

If you're an Alarm Grid customer and you use an Alarm.com compatible panel with a Z-Wave or WIFI Smart Thermostat, you may be eligible to enroll in the same type of program in your area. To find out, you can go to enrollmythermostat.com, enter your Zip Code in the space supplied, and find out if your electrical, and in some cases gas company participates in the Give Back Get Back Program. As the old saying goes, every little bit helps!

Have a security-related topic you'd like to hear more about? Drop a comment in the space below and we'll research and post relevant information. What do you think about the Give Back Get Back Program? Are you in an area where you can take advantage of this feature? If not, contact your utilities provider, maybe they're unaware of this incentive program.

The Alarm Grid holiday buying guide for the 2020 season continues, this time focusing on smart home automation. We will be covering our top picks for lights, door locks, and thermostats. As usual, our selections are compatible with our top security system picks for the 2020 shopping season.

If you haven't seen our earlier 2020 holiday buying guide releases, make sure to review them at some point. They will provide you with a good introduction before checking out our smart home automation offerings.

• Alarm Grid Holiday Buying Guide 2020 for Alarm Panels
• Alarm Grid Holiday Buying Guide 2020 for Security Sensors
• Alarm Grid Holiday Buying Guide 2020 for Environmental Sensors

An automation device is a piece of equipment that you can have activate automatically based on a set schedule. These devices can also be controlled remotely from virtually anywhere in the world using a platform like Total Connect 2.0 or Alarm.com and a simple app on your smartphone. When we talk about automation devices for alarm systems, we are mainly discussing lights that can be turned ON or OFF, dimmer modules that can adjust the brightness of lights, door locks that can be LOCKED or UNLOCKED, and thermostats that can increase or decrease the set temperature in the building when connected with an HVAC system. There are also some miscellaneous automation devices, including smart water valves, that we will also explore. Depending on the platform, you can also integrate these devices with smart home voice assistants like Amazon Alexa and Google Home. We won't be exploring that too much in this buying guide, but it is something to keep in mind if you already have a smart home assistant set up in your house, or if you were considering setting one up in the near future.

To keep our automation section as simple as possible, we will be primarily looking at Z-WAVE PLUS automation devices. This refers mostly to 500-Series Z-Wave Plus devices, though you may occasionally see some newer 700-Series Z-Wave Plus devices thrown in as well. Using certified Z-Wave Plus devices with a Z-Wave Plus controller will ensure the furthest possible wireless range, as well as the longest possible battery life, when applicable. Using exclusively Z-Wave Plus devices on a Z-Wave Plus controller is also the best way to ensure the strongest possible mesh network. Another advantage to going with Z-Wave Plus is that your automation devices will pair directly with your alarm system, which will thereby serve as your central automation controller. This keeps things as simple and as organized as possible, and it will ultimately allow you to keep everything in the same app on your phone.

However, we will also be including a few Apple HomeKit products along the way. We understand that we have many customers who use iOS and are building around the HomeKit platform for automation. When looking at our top security system picks, only the Honeywell Lyric is compatible with Apple HomeKit. This is out recommended system if you are building around the HomeKit platform. If you are starting from scratch and you are not a dedicated iOS user, then you will likely prefer Z-Wave Plus, as you can keep all your system control and automation control in the same app, with virtually no crossover. But, if you have taken advantage of what Apple HomeKit has to offer, and you want to continue building around the platform, then we have you covered. Remember, of our top system picks, only the Lyric can support HomeKit, and even then, your HomeKit devices will not pair directly with the Lyric.

Of our top security system picks for the 2020 holiday buying season, both the Qolsys IQ Panel 2 Plus and the 2GIG GC3e support Z-Wave Plus technology. Both of those systems have their own integrated Z-Wave Plus controller, and they will allow you to take full advantage of what Z-Wave Plus has to offer. However, our other top pick, the Honeywell Lyric only has a classic Z-Wave controller built-in. You can still enroll Z-Wave Plus devices with the Lyric, but they won't offer the same range, battery life, and security provisions as Z-Wave Plus. This makes the Lyric the weak link of the three if automation outside of Apple HomeKit is particularly important to you. But rest assured that every product listed here should work with any of our recommended systems. Its just that you will get the best possible results by using a Z-Wave Plus compatible system, like the Qolsys IQ Panel 2 Plus or 2GIG GC3e.

With all of that out of the way, let's begin exploring our favorite smart home automation devices of the 2020 holiday season.

Smart Lights

Smart lights can be split into a few different categories. They are usually either in-wall modules that replace your existing, standard light switches, or they are plug-in module that you simply plug into a regular wall outlet. Lights can also be split into groups of ON/OFF switches that merely turn the lights ON and OFF, and groups of dimmer modules that can actually adjust the brightness of the lights. As such, you will see four (4) groups of lights listed below. There are in-wall switches, in-wall dimmers, plug-in switches, and plug-in dimmers. We know that may seem a bit confusing, but it should make more sense once you see all of the categories properly laid out and organized. Spoiler, if you're looking for Apple HomeKit Lights, then skip to the very end of this section.

We will start with Z-Wave Plus in-wall switches. These devices replace existing in-wall switches, and they are able to turn the lights ON and OFF. When installing one, make sure to cut power at the circuit breaker first. Then simply remove the existing in-wall switch, and install your new Z-Wave Plus in-wall switch in its place. Keep in mind that most of these units will require the use of a neutral wire. Most homes built in the 1980s onward will have this readily available, though older homes may be lacking this wire. It's also important to mention that all of the in-wall switches listed here should readily fit into single gang brackets. We will also be listing coordinating 3-way switches in the notes section when applicable.

Here are our top picks for Z-Wave Plus in-wall switches.

Next up are Z-Wave Plus in-wall dimmers. These units also replace your existing in-wall switches. The difference here is that these devices have the ability to adjust the brightness of your lights, in addition to simply turning them ON and OFF. You will want to make sure you are using these devices with dimmable light bulbs. Again, you will want to cut power at the circuit breaker when installing. Most of these units will require a neutral wire, though there is an exception here. You should be able to fit these units into a single-gang electrical bracket.

Here are our top picks for Z-Wave Plus in-wall dimmers.

Now we will look at some more DIY-friendly options, starting with Z-Wave Plus plug-in switches. Unlike in-wall switches that you have to install using a screwdriver, these devices simply plug into your standard wall outlet. Just plug one in, connect a lamp, and you now have smart lighting control. These units couldn't be more straightforward and simple to use, and if you're intimidated by having to install your own in-wall light switch, then these are a fantastic alternative. Again, these units are only capable of turning the lights ON and OFF. You can also technically use some of these units with other plug-in devices, provided that the connected device does not exceed the maximum load limit.

Here are our top picks for Z-Wave Plus plug-in switches.

Our penultimate category of smart lights focuses on Z-Wave Plus plug-in dimmers. As you can probably guess, these are plug-in modules, but instead of just turning the lamp ON and OFF, you can also adjust its brightness. The use of dimmable bulbs is recommended. Again, this is an excellent DIY alternative if you don't feel comfortable installing your own in-wall dimmer switch. Just plug it in, connect a dimmable lamp, and enjoy your new smart lights!

Here are our top picks for Z-Wave Plus plug-in dimmers.

Lastly, we want to give special recognition to Apple HomeKit compatible smart lights. We're keeping things simple by only listing products from Lutron. These lights work by building around a centralized base station and then pairing lighting modules with that main unit. Our team at Alarm Grid is wholly impressed by what Lutron has to offer, and we can definitely recommend these lights for anyone building around the HomeKit platform. One other major benefit of Lutron Smart Lights is that no neutral wire is required as part of the setup. This can be very beneficial if you do not have a neutral wire in your home's existing electrical wiring. Please note that Alarm Grid only offers the Caseta lineup from Lutron, so that is what we will be focusing on in this buying guide.

The Lutron section of this guide will be split into four (4) categories. First we will look at the smart bridges, or central hubs, that we offer for Lutron. Then we will explore some bundled deals we offer as starter kits. From there, we will check out individual Lutron lighting devices. Lastly, we will examine some accessories for Lutron devices.

First up, we have the Lutron Smart Bridges. There are only two (2) here. You need one of these devices to start building a network of Lutron Smart Lights. You will notice a standard "non-Pro" model, as well as "Pro 2" model. The main difference here is that the "Pro 2" model can integrate with Alarm.com, while the "non-Pro" model cannot. This is completely irrelevant if you are building a HomeKit network around the Honeywell Lyric, as you will be using Total Connect 2.0 as your interactive smart platform instead of Alarm.com. But if you are using HomeKit separately with an IQ Panel 2 Plus, a 2GIG GC3e, or pretty much any other Alarm.com Security System, then this can really come in handy, as you can then integrate your smart lights in with the same network as your alarm system.

Here are our Lutron Smart Bridges.

But before you rush out and buy one of the aforementioned Lutron Smart Bridges, you may instead consider getting one of our Lutron Starter Kits, which all include a Lutron Smart Bridge and some compatible devices to get you started. This can save you a bit of money if you are just getting started with Lutron. Unfortunately, we only have starter kits based around the "Non-Pro" smart bridge. If you are wanting the "Pro 2" model for Alarm.com use, then you will need to buy that model ala carte, along with all the devices you want to pair.

Let's check out our Lutron Starter Kits.

Now we'll look at the actual Lutron Lighting Components. These are the individual, ala carte lighting devices that you pair with your Lutron Smart Bridge. The included notes should help you decide which devices are right for your Lutron network. Lutron keeps things relatively simple here, as the selection is short but sweet.

Here are individual Lutron Lighting Components.

Last but not least, we have some Lutron Accessories. These include the Pico Remote that you can use a remote control for your Lutron Lights, as well as various wall-plates and some bundles. There are quite a few accessories to cover, and they make the perfect stocking stuffer for the Lutron lover on your gift list.

Here are Lutron Accessories.

Door Locks

Door locks are fairly straight forward. They replace the existing deadbolt lock on your front door, back door, patio door, pool door, garage door, or really any door with a deadbolt lock. You will then have smart control over that door, meaning you can LOCK and UNLOCK it remotely using a compatible interactive service platform. This also includes the ability to have the door LOCK or UNLOCK automatically with smart scenes. Most of the locks listed here will allow you to use a traditional key if you want, but you can also manually enter a code into the lock using push-buttons or a touchscreen. This can be very convenient for getting in if you forget your key or don't wish to carry one around.

Virtually any door lock will accomplish the same goal, so what you should base your buying decision on is how reliable the brand is, how you control the door lock locally (e.g. a push-button touchpad or a LED touchscreen), and which design you like. You will also need to decide whether you need a Z-Wave Plus door lock or an Apple HomeKit door lock. Most of the models listed here are Z-Wave Plus variants, but we did include a couple of HomeKit versions for good measure. Many of the door locks listed here come in multiple finishing options to give you some added customization. You will notice that we do not list too many brands here. We really wanted to focus on the ones we feel the most confident in offering.

Here are our top picks for door locks.

Smart Thermostats

Now we're really getting into exciting territory, as smart thermostats allow you to control the temperature in your home from virtually anywhere! This is perfect whether you want to keep energy costs low, or you simply want to ensure you arrive home to a comfy house. We all know how stressful it can be if you forgot to adjust your thermostat before leaving home. Well, now you can worry no longer! All you need to do to get started is cut the power at the breaker for your HVAC system, remove your old thermostat, and install your new smart thermostat in its place. This is easier than you might think! For this category, we will mostly be covering Z-Wave Plus thermostats, but we did include an Apple HomeKit thermostat in the listings as well.

Here are our top picks for smart thermostats.

Other Smart Home Devices

Alright, we're finishing this up with some great smart home devices that we couldn't really fit into any other category. Our main focus here will be on smart garage door controllers and smart water valves. These are super convenient and useful devices that make a great addition to almost any home. A smart garage door controller connects with your existing garage door motor so that you can open and close your garage door from anywhere or have it open and close automatically with smart scenes. Smart water valves are an excellent emergency tool that you can use to shut-off your water supply in the event of a flood or leak. Many users will pair them with flood sensors for inclusion in smart scenes. Unfortunately for Apple HomeKit users, we don't have any HomeKit devices for this section, and we will only be covering Z-Wave variants in this section.

Check out these miscellaneous smart home devices!

Reach Out to Us!

Got any questions about which smart home devices are right for you, or are you not sure about compatibility? Reach out to us! Our team is happy to help you make your holiday shopping season as easy and as stress-free as possible. The best way to contact us is to email support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. And as always, we look forward to hearing from you!

Hi DIYers! We know how important it can be to beat the summer heat with a new smart thermostat. That is why we are presenting you with our very own best smart thermostats of 2019. These devices all make fantastic additions to any growing smart home, and they are perfect for daily use.

A smart thermostat is great because you can program it to save huge amounts of money on your energy bills, while still keeping your home nice and cool when needed. You can integrate these devices with excellent platforms like Alarm.com, Total Connect 2.0, and even Apple HomeKIt. Just be aware that platform compatibility will vary between different devices. Make sure you purchase a smart thermostat that is compatible with the network you want to use.

With that out of the way, let's take a look at the best thermostats of 2019:

Honeywell T6 Pro Smart Thermostat

Resideo really outdid themselves with the Honeywell T6 Pro Smart Programmable Thermostat. This is the only thermostat on this list that comes in two (2) distinct flavors. These are a Z-Wave Plus version and an Apple HomeKit version. Regardless of which version you choose, you get a neat and clean UI that even new users will feel comfortable using. A unique aspect of this thermostat is that the Z-Wave Plus model does not require a C-wire for power. Instead, the device can run reliably on battery power alone. However, the HomeKit version requires the C-wire connection for WIFI communication. And although the Z-Wave Plus version was built for use with Total Connect 2.0, you can still use it with other networks like Alarm.com and Samsung SmartThings. Just know that it was designed with TC2 in mind.

Best for: Total Connect 2.0 users, Apple HomeKit users.

Alarm.com ADC-T3000 Smart Thermostat

Created specifically for Alarm.com users, the ADC-T3000 offers all the advanced features you would expect out of a robust and powerful smart thermostat. This is a Z-Wave Plus Thermostat which integrates perfectly with any Alarm.com Security System. Although you can technically use this device with other smart platforms like Total Connect 2.0 or Samsung SmartThings, it works best when used with Alarm.com. With the ADC-T3000, you can take advantage of great features like Alarm.com Geofencing, external temperature detection, humidity sensing, smart programming, and more.

Best for: Alarm.com users.

iDevices Smart WIFI Thermostat

The iDevices Smart WIFI Thermostat, also known as the iDevices IDEV0005AND4, was built for users who want a reliable and affordable smart thermostat, but don't necessarily want to integrate it with their alarm control panel. While its WIFI connectivity will not allow you to use the thermostat with Total Connect 2.0 or Alarm.com, this product is great for those who use smart, voice control platforms like Apple HomeKit, Amazon Alexa, and Google Home. The iDevices Smart WIFI Thermostat boasts an easy-to-use color-coded touchscreen, along with push-button controls. It fits in nicely with any decor, and no external hub is needed to use the thermostat. You can also use the convenient iDevices Connected App on iOS and Android devices to easily control the smart thermostat from anywhere.

Best for: Apple HomeKit users, Amazon Alexa users, Google Home users.

Carrier Côr Smart WIFI Thermostat

Apple HomeKit and Amazon Alexa users looking for a premium smart thermostat can get great results out of the Carrier Côr Smart WIFI Thermostat. Although this thermostat is unable to integrate with alarm panels, it is still loaded with features that make it one of the best smart thermostats available. The typical homeowner saves 20% on their heating and cooling costs with this Energy Star Certified Thermostat. End users also appreciate the local 4-day weather forecast that is conveniently displayed on the main screen. Other features include Ideal Humidity System Management, Hybrid Heat Management, Ideal Away, and Intelligent Comfort to help the thermostat control the temperature more accurately. This thermostat features a 7-day programming schedule and auto-adjusting between heating and cooling.

Best for: Apple HomeKit users, Amazon Alexa users.

Need Help Choosing a Smart Thermostat?

If you are having trouble deciding on the perfect smart thermostat for your home or business, please reach out to us! Our team is happy to discuss the pros and cons of each thermostat so that you can make the best purchasing decision for your needs. Remember, the best way to reach us is to always email support@alarmgrid.com. We will check your email at our earliest convenience and respond back as soon as possible. You may also call our planning department during our regular business hours of 9am to 8pm EST M-F at (888) 818-7728. We look forward to helping you beat the heat with a brand-new smart thermostat from Alarm Grid!

We have learned that Version 5.8.5 of the Total Connect 2.0 Mobile App for iOS has a bug that affects WIFI thermostats. The update leaves users unable to control their WIFI thermostats with the mobile app. However, iOS users can still control their WIFI thermostats through the TC2 website.

Many users have found that upon updating to the latest version of Total Connect 2.0, they have been left unable to operate their WIFI thermostats through the app. This includes any Honeywell Lyric Round Thermostats and any WIFI thermostat that pairs with TC2 through a Total Connect Comfort, Honeywell Home or Redlink integration.

Please note that the bug only affects the iOS version of the Total Connect 2.0 Mobile App. Android users are not affected. Additionally, Z-Wave Thermostats are also unaffected. If you are currently running iOS Mobile App Version 5.8.5, then you can still use the TC2 website to control your WIFI thermostat. You should be able to access the website using the standard web browser on your iPhone or iPad.

We expect that Resideo will release an update to fix this bug in the near future. But it may take some time before this happens. Until then, Alarm Grid monitored customers should reach out to support@alarmgrid.com with any questions. Alarm Grid will provide an update when we learn that the bug has been fixed.