Qolsys IQ Smart Plug-PG Posts

Update 09/18/23: Qolsys has released this firmware as of today. Alarm.com, however, has not yet made it available for dealers to perform remote OTA updates. They usually lag behind Qolsys by a few days, as they perform their own testing. Instructions for updating using a patch tag can be found here. The full Qolsys TSB can be found here.

Original Blog Post:

We've been hearing about it for a while, and Firmware 4.4.0 will be available any day now. In this post, we'll go through some of the big additions, fixes, and improvements that you can expect to see in this release. From support for PowerG automation devices to the addition of Night arming.

This is one of the most ambitious updates for Qolsys that we've seen. There are a lot of new features in this update. There are also some important fixes and improvements included. In this post, we'll go through what we believe are some of the more important changes coming up in Firmware 4.4.0.

New Features:

• Support for All New PowerG Automation Devices:
  • IQ Lock-PG
  • IQ Dimmer-PG
  • IQ Switch-PG
  • IQ Smart Socket-PG
  • IQ Smart Plug-PG
  • IQ Outdoor Plug-PG
• Added a new Automation Icon within the Installation > Devices Menu. This icon is where you will now go to add everything except Z-Wave Automation devices. However, from within this screen, you can reach Z-Wave Automation (if you navigate here in error). In the future, we expect all Automation will be programmed from within this screen.
• Added "Night Arming" mode. The panel can now be armed in "Away", "Stay", or "Night".
• Created a new PIN code setting for users of the IQ WIFI 6. This will restrict access to the profiles and network map settings of the router.
• Added support for Aeotec Indoor Siren 6.
• Added Sensor Group 11 (Day Zone) and Group 21 (Night Motion).
• Added Sensor Groups 61 (Fixed Intrusion Panic) & 62 (Fixed Silent Panic). With these settings, hardwired, latching panics can now send restore signals when they are physically restored.
• Allows exterior PowerG motions to be programmed as Door/Window sensors to expand the Sensor Group options when programming.
• Added the option to display ambient temperature on the IQ Panel 4 and IQ4 Hub screen when used with PowerG and PowerG Plus devices that support reporting ambient temperature (listed below).
  
  
  • PG9312
  • PG9309
  • PG9200AX
  • PG9350SL
  • PG9914
  • PG9862
  • PG9872
  • PG9984P
  • PG9922
  • PG9936
  • PG9933
  • PG9905
  • PGP9945E
  • PGP9922
  • PGP9920
• PowerG Smoke Detectors can now sound different cadences for Intrusion, Fire, and CO alarms when the "PowerG Smoke Detector Siren" option is used for additional sounders.

Before going on to Fixes and Improvements, I wanted to pause for a moment and expand a bit on a couple of the things listed above. With the new Sensor Group 11 (Day Zone) here is the description of operation for that zone type: Intended for a Door or Window zone that triggers an alarm instantly if the system is armed (same as Group 13). When the panel is disarmed, the zone will annunciate Opens AND Closes, and will continue to notify until the Dismiss button is pressed on the panel screen.

When it comes to Night Arming, an understanding of the Groups associated with motion detectors is essential. Below is an explanation of how each Sensor Group operates. All of these Groups are supervised.

• Group 17, Away-Instant Motion: Active only when armed to "Night" or "Away". Trips instantly when motion is detected. Does not trip if an E/E zone is tripped first.
• Group 15, Stay-Instant Motion: Active in "Stay," "Night," and "Away". Trips Instantly when motion is detected. Does not trip if an E/E zone is tripped first.
• Group 35, Stay-Delay Motion: Active in "Stay," "Night," and "Away" modes. Triggers an Entry Delay if motion is faulted. Does not trip if an E/E zone is tripped first.
• Group 20, Away-Delay Motion: Active when armed to "Night" and "Away". Triggers an Entry Delay if triggered first. Does not trip if an E/E zone is triggered first.
• Group 21, Night Motion (New): Active only when armed to "Away" and trips instantly when motion is detected by this sensor first. Does not trip if an E/E zone is tripped first.
• Group 25, Safety Motion: This sensor does not report or trigger an alarm. This is a "Chime-Only" sensor when "Activity Monitoring" is active, regardless of panel armed status. Used for medicine cabinets, storage, activity tracking, etc.

Panel Fixes and Improvements:

• Changed the Z-Wave naming convention for Settings related to Automation.
• Added support for Z-Wave Weiser/Kwikset Lock supervision requests.
• Made improvements to text size and movement in Photo Frame Screensaver.
• Enhanced the downloading of images and videos from the IQ Panel to a mobile device.
• Added a 30-second arming delay for the IQ Panel 4's built-in glass break detector.
• Fixed an issue with pairing the ADC S2000-T Temp Sensor to the panel.

IQ Remote PowerG Fixes and Improvements:

• Added the ability for the IQ Remote PowerG to automatically power back on after an extended power failure/battery drain, once primary power is restored.
• Corrected an issue where "Nighttime Mode" was not working properly on the IQ Remote PowerG.
• Changed the functionality of the Power Button on the IQ Remote PowerG. Power Down/Reboot now requires a 10-second button press.
• Added support for Thermostats and Garage Door Control to the IQ Remote PowerG.
• Added "Weather Clock" to the IQ Remote PowerG Frame Options.
• Weather to the IQ Remote PowerG now functions when paired in both PowerG and WIFI modes.
• Added support to IQ Remote PowerG for "Installer Test Mode" where the siren is temporarily silenced during testing.
• Added support to the IQ Remote PowerG for Doorbell Notification pop-up and chime, when paired over both PowerG and WIFI.
• IQ Remote PowerG enrolled over PowerG will now automatically upgrade upon first enrollment, rather than waiting 24 hours.
• General communication improvements (Sync/Delay).

Update Instructions:

This firmware is now available, so you can perform the update. Your panel must be on Firmware Version 4.3.0+ before upgrading to 4.4.0. To check your firmware version, tap the gray bar at the top of the panel's home screen, then press Settings > Advanced Settings > Enter Installer or Dealer Code (1111 or 2222 respectively) then tap About > Software.

If your panel is on Firmware Version 4.0.0, 4.0.1, or 4.1.0, you must first update to 4.1.1.

From there, you can update to 4.2.0 or 4.2.1. Then you can update to 4.3.0 and finally to 4.4.0. This is very important! Failure to follow the proper update steps could cause your panel to become unresponsive.

Now that 4.4.0 has been released you can follow the steps below to update from 4.3.0 to 4.4.0:

1. Swipe down from the top of the panel screen and tap "Settings."
2. In "Settings" tap "Advanced Settings."
3. Enter Installer or Dealer Code (default is 1111 or 2222 respectively.)
4. Tap "Upgrade Software."
5. Tap "Patchtag" then enter iqpanel4.4.0 and then tap "Ok."
6. Tap "Upgrade Using Network," making sure the panel is connected to WIFI. Without a WIFI connection, the upgrade will not go through.

The patch will now be downloaded and then installed. It is important not to touch the panel screen during this process. You'll see a progress bar while the download is in progress, then the panel will reboot. This is normal. Once the panel boots up to the usual security screen, the upgrade is complete. The update usually takes approximately five (5) minutes to complete.

If you prefer, the update can eventually be pushed by your alarm dealer through the Alarm.com dealer portal. If your panel is on an older version, they should also be able to send any prerequisite updates to your panel prior to sending 4.4.0. Just be sure the panel has a connection to WIFI as even updates that are sent through Alarm.com require a WIFI connection at the panel.

Qolsys, which is owned by Johnson Controls, Inc., the same company that owns DSC, is introducing a new lineup of PowerG automation devices. Currently, they offer a door lock along with a range of wired and plug-in switches. These devices will be supported by the IQ4 panels and the IQ Pro.

I say "will be supported" instead of "are supported" because the firmware required to support these new PowerG automation devices hasn't been released yet. For the IQ Panel 4, IQ4 Hub (PowerG Version), and IQ4 NS (PowerG Version) this is firmware version 4.4.0. For the Qolsys IQ Pro, firmware 4.3.0n is required. These firmware updates should be available later this month for the IQ4 Series panels, and soon thereafter for the IQ Pro.

We've talked before about the benefits of PowerG sensors. The big story with this and all PowerG devices is the transmitting range. Depending on the PowerG transceiver being used you can expect hundreds, and up to thousands, of feet in transmitting range. The PowerG repeaters will also work with these devices, so in the unlikely event you need one, a repeater is available.

Compare that to a Z-Wave Plus device, where you can expect a transmitting range of a couple hundred feet at most. Z-Wave is a mesh network, though, so if you plan to install a large number of devices, you can build out an impressive network using that technology. The problem is if you have a single area you want to automate, and it's not near the rest of your Z-Wave network, you might be out of luck with Z-Wave, but not with PowerG!

The encryption used with PowerG security sensors is also used here, so you get 128-bit AES encryption with FHSS (Frequency Hopping Spread Spectrum) which you can read more about here.

IQ Lock-PG:

The IQ Lock-PG (SKU: IQDLK-PGK) is available in three (3) finishes. Shown above from left to right in Satin Nickel, Matte Black, and Oil-rubbed Bronze. This lock is powered by four (4) AA batteries (not included) and with typical use, the battery life expectancy is one (1) year. This estimate is based on six (6) user code unlocking events and ten (10) locking/unlocking events per day. The IQ Lock-PG offers self-handing capability, and the lock motor is noticeably quieter than previous automated locks we've heard.

Unlike some automated locks, the IQ Lock-PG does offer the option to use a key, and two (2) keys are included with it. It has a KW1 keyway cylinder. The IQ Lock logo lights up green when the door is unlocked, and red when it is locked. This provides a nice visual indication of the lock status when the user is returning home or to their business.

Specifications:

• Operating Temperature: Exterior: -31°F to 150°F (-35°C to 66°C), Interior: 32°F to 140°F (0°C to 60°C)
• Material: ANSI Grade 2 Certified
• Compatibility: Compatible with the Qolsys IQ4 NS (No Screen) (PowerG Version), IQ4 Hub (PowerG Version), IQ Panel 4, and IQ Pro panels
• Technology: PowerG
• Key Cylinder: Yes (KW1 keyway)
• Self-Handing: Yes
• Bolt Type: Motorized/ Standard Deadbolt
• User Codes: Up to 250 unique users
• Code Length: 4-10 Digits
• Batteries: Four (4) AA batteries (not included)
• Low Battery Alarm: Yes
• Backset: 2 3/8”/ 2 3/4” Adjustable (60/70mm)
• Door Prep: 1 1/2” / 2 1/8” (38/54mm)
• Door Thickness: 1 3/8” ~ 2 1/4” (35-58mm) automatic adjustment
• Lockout Mode: Keypad lockout for 3 minutes after 10 entries of invalid user code
• Certifications: FCC, IC, ANSI BHMA A156.36 Grade 2, UL10C (20min Fire Rating)
• IP Rating: Exterior assembly: IP54
• Operating Humidity: Exterior: 100% condensing Interior: 20% – 95% non-condensing

IQ Switch-PG:

Next up is the Qolsys IQ Switch-PG (SKU: IQSWH-PG). This is an in-wall on/off switch without dimming. It can replace any standard in-wall switch to add automation capabilities to the circuit. With PowerG technology built-in, you will be able to automate devices in areas you may have thought impossible before. Have an outbuilding that you thought was too far away for automation? With PowerG, that goal may be well within reach depending on how far the building is located from the compatible panel.

Before removing the old switch and replacing it with the IQ Switch-PG, be sure the breaker is turned off. Failure to do so may cause damage to the switch and to you! This is a hardwired switch, which will be connected to 120V, so we do recommend that you have a qualified electrician perform the wiring.

Specifications:

• Technology: PowerG
• Power: 120V at 60Hz
• Maximum Load: Incandescent 600W, CFL/LED 300W
• Current: 5A Max
• Standby Power Consumption: <1W
• Wiring: 16 AWG (direct wire connection)
• Noise: 24dB at 20cm Max
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: -4°F to 140°F (-20°C to 60°C)
• Weight: 4.09 oz (116g)
• Operating Humidity: 0% – 85% non-condensing

IQ Dimmer-PG

The Qolsys IQ Dimmer-PG (SKU: IQDMR-PG) is also an in-wall switch, with dimming capabilities included. As with the IQ Switch-PG, this device can replace any existing 120VAC switch that fits within its specifications to add remote control and automation capabilities.

Another attractive feature for this and all of the new hardwired PowerG switches and sockets is that they come with a screwless faceplate. This provides a clean, modern look. Currently, they are only available in white. If you prefer a more traditional look, the screwless faceplate can be removed and there are screw holes for a traditional faceplate. This may also come in handy if you have multiple switches in a line and require a double-gang or triple-gang setup.

Some Important Specifications:

• Compatibility: Compatible with the Qolsys IQ4 NS (PowerG Version), IQ4 Hub (PowerG Version), IQ Panel 4, and IQ Pro panels
• Technology: PowerG
• Power: 120V at 60Hz
• Maximum Load: Incandescent 200W, CFL/LED 100W
• Current: 1.67A Max
• Standby Power Consumption: <1W
• Wiring: 16-10 AWG (terminal block connection)
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: -4°F to 140°F (-20°C to 60°C)
• Weight: 4.83 oz (137g)
• Operating Humidity: 0% – 85% non-condensing

IQ Smart Socket-PG:

The Qolsys IQ Smart Socket-PG (SKU: IQSKT-PG) is an in-wall socket with two (2) sockets that can be controlled individually. By replacing a standard in-wall socket with the IQ Smart Socket-PG you gain the ability to individually control the devices plugged into each outlet from the panel's touchscreen, or from the Alarm.com app or webpage.

Using rules and scenes, you can create automation scenarios to turn devices on or off based on other events that occur on the system, or based on a schedule. With the Smart Rules Builder, available on Alarm.com, you can easily create automation rules to suit your every need.

Specifications:

• Color: White
• Tamper Resistant?: Yes
• Technology: PowerG
• Input Power: 120VAC at 60Hz
• Output Load: 120VAC at 60Hz, 15A Total Max Load for both outlets
• Maximum Load: Total 1800W@120V (Resistive Load)
• Standby Power Consumption: <1W
• Dimensions: 14.5 x 2.75 x 1.7 Inches (115 x 70 x 44 mm)
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: -4°F to 131°F (-20°C to 55°C)
• Weight: 5.57 oz (157.8g)
• Operating Humidity: 0% – 90% non-condensing

IQ Smart Plug-PG:

The Qolsys IQ Smart Plug-PG (SKU: IQIDP-PG) is an indoor plug-in module. Often referred to as appliance modules, these devices allow you to quickly turn any existing wall outlet into a smart outlet with no electrician required. With its low-profile form factor, you will be able to make one outlet smart without blocking the other outlet in a traditional two-outlet wall plug.

To learn these devices into any of the IQ4 panel lineup, once you have the 4.4.0 firmware installed you'll press the grey bar at the top of the panel screen, go to Settings > Advanced Settings > Enter Installer or Dealer Code (1111 or 2222 by default) > Installation > Devices > Automation > Auto Learn Devices. From there, just power on the PowerG device and it will auto-learn into the system.

Prior to firmware version 4.4.0, the Automation menu option was missing from the Devices screen, so you won't be able to properly learn these devices on older firmware panels. If you attempt to learn any of them as a security sensor, they will likely learn in, but will not operate properly and will need to be removed from sensor programming prior to proper enrollment once the firmware has been updated.

Specifications:

• Color: White
• Technology: PowerG
• Power: 120VAC at 60Hz
• Output Power: 1800W@120V (Resistive Load)
• Standby Power Consumption: <1W
• Dimensions: 2.6 x 1.5 x 1.29 Inches (68 x 38 x 33 mm)
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: -4°F to 122°F (-20°C to 50°C)
• Weight: 2.29 oz (65g)
• Operating Humidity: 10% – 90% RH, non-condensing

IQ Outdoor Plug-PG:

The Qolsys IQ Outdoor Plug-PG (SKU: IQODP-PG) allows you to take one single outdoor outlet plug, and make two (2) smart outlets out of it. These two (2) outlets will be enrolled as separate automation devices and can be controlled individually.

Here's an example of how this plug can come in handy. Perhaps you used to have your patio string lights and a bug zapper connected to the two plugs of an outdoor outlet. You can now connect the IQ Outdoor Plug-PG to one of the existing available outlets, and plug the string lights and the bug zapper into it. You can automate the string lights to come on at dusk and turn off at a set time. Automate the bug zapper to turn on based on some other criteria, whether it's a schedule, or based on the opening of the patio door. And you still have one of your previously existing outlets available for another device.

Specifications:

• Color: Black
• Tamper Resistant?: Yes
• Compatibility: Compatible with the Qolsys IQ4 NS (No Screen), IQ4 Hub, IQ Panel 4, and IQ Pro panels
• Technology: PowerG
• Power: 120VAC at 60Hz
• Output Power: 1800W@120V (Resistive Load)
• Output Load: 120VAC at 60Hz, 15A Total Max Load for both outlets
• Standby Power Consumption: <1W
• Dimensions: 2.6 x 1.5 x 1.29 Inches (68 x 38 x 33 mm)
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: -4°F to 122°F (-20°C to 50°C)
• Weight: 2.29 oz (65g)
• Operating Humidity: 10% – 90% RH, non-condensing

At Alarm Grid, we're super excited about the launch of these new automation devices. I believe these will be game-changing, particularly in circumstances where transmitting distance has been a hindrance in the past. I expect we'll see additional PowerG automation devices in the near future.

Hopefully, a PowerG garage door controller, PowerG PGM device, and my personal hope, some PowerG motorized blinds or shades. Stay tuned and we'll let you know when the firmware to support these devices is released. Are you excited about the new PowerG automation products? Leave a comment below and let us know what you think. What other automation devices would you like to see in the PowerG lineup?