Solution for Using MyQ Garage Door Controllers with TC2 Smart Scenes

Hi DIYers! Many of our customers have been using Chamberlain and LiftMaster MyQ Garage Door Controllers with Total Connect 2.0. These smart garage door controllers are perfect for use with the TC2 platform. They offer a great way to integrate your garage door into your smart home network.

The Chamberlain and LiftMaster MyQ integration is great for tying in remote control for your garage doors to your Total Connect 2.0 account. By using this integration, you can consolidate your garage door control into one single app, instead of two separate ones. However, there is a limitation. The integration does not allow you to add the MyQ garage doors into a TC2 Smart Scene for automated control based on security system actions. For instance, you cannot create a scene that will automatically disarm your Resideo System if your garage door is opened. But fortunately, we now have a solution for this problem.

When you integrate your MyQ Garage Door Controller in with Total Connect 2.0, you can control your garage door remotely through the platform. You can also receive text and/or email alerts when the garage door opens or closes. However, if you try to integrate your MyQ Controller with smart scenes, you will be unable to do so. But we recently came up with a solution for this issue that will work for the Lyric Controller and all LYNX Touch Systems. This solution will also provide your system with the ability to truly monitor the activity of your garage door.

The answer is to add a sensor to your garage door. You will want to use either a tilt sensor or a contact sensor with a wide spacing gap. The Honeywell 5822T is a wireless tilt sensor that can easily pair with a Lyric or LYNX Touch System. Another option is the Honeywell 958. This is a hardwired contact designed for overhead garage doors. You can either wire the Honeywell 958 back to the panel, or you can connect it to a wireless sensor that accepts a wired input, such as a 5816 or a SiXCT. Whether you go with the 5822T or the 958 is really up to you, as they are both perfect options for this job.

You should program the sensor into one of the designated wireless garage door zones. The designated garage door zones for an L5100, L5200, or L5210 are Zones 46 thru 48. For an L7000, they are Zones 45 thru 48. And for the Lyric, they are Zones 127 thru 130. You should give the Zone Descriptor a name that allows you to easily recognize it as your garage door.

Please note that each garage door zone is associated with a particular garage door slot. The table below outlines this:

From there, you should program a "virtual" Honeywell 5877 Relay Module into the system through the Automation Menu. The 5877 is a Honeywell Wireless Relay Module that provides remote control for garage doors. However, it is not compatible with MyQ Garage Door Controllers. With this trick, you don't actually need a 5877 Relay, but you will program your system as if you are using one.

What you want to do is start from the main screen of your panel. Choose Automation > down arrow > Garage Door Setup. From there, choose the garage door slot associated with the zone you set up with the tilt sensor or the contact sensor. Click on "Assign Device". Then go to the "Enter Serial Number" field. Since you aren't actually using a real 5877, you can just enter a fake serial number like "1111111". Click "Done" in the bottom-right corner when you have finished. This will make the system think that a 5877 Relay has been enrolled. You can then return to the main screen by repeatedly pressing the return arrow in the upper-right.

You can then create TC2 Smart Scenes to have the system respond automatically based on the status of the garage door. For example, you might have a smart scene to disarm your system automatically when you open your garage door. To do this, you will want to use the garage door slot that you set up on the system when creating the smart scene. The system will know to change the status of the garage door (opened or closed) based on the activity of the associated zone.

Now, you might be wondering why you need the "fake 5877" setup with the system. The reason for that is because you can't create smart scenes to Arm or Disarm your system based on zone faults. So even if you have sensor programmed for your garage door, you cannot use it as a trigger for arming or disarming your system. But you can use a garage door as a trigger. By making your system think that it has a true garage door programmed, you can use that as a trigger for smart scenes.

It must be mentioned that there are a couple of limitations to this setup. For one, you cannot use this work-around to have your garage door respond automatically based on system activity. This is because there is no real relay module to tell the garage door what to do. So if you want to have the garage door automatically open/close when you arm/disarm your system, it will not work. Second, this will not work with Honeywell VISTA Systems, as those systems do not support the 5877. As a result, you cannot program a "fake 5877" on a VISTA Panel. But other than these limitations, this is a pretty good work around. You also get the benefit of enabling your system to truly monitor your garage door for activity.

If you have any questions about this work-around, please reach out to us. The best way to contact us is to email support@alarmgrid.com. We will check your email at our earliest convenience and respond as soon as possible. We look forward to helping you.