Sound Clip for Testing Glass Break Detectors
Posted By Michael GorisHi DIYers! Our YouTube Channel uploaded a sound clip that mimics the sound of breaking glass. This sound clip can be used to test various glass break detectors for proper function. This includes both external glass break sensors and the internal glass break sensor for the Qolsys IQ Panel 2.
Although this might just sound like a generic glass break effect, it was actually specifically designed for testing glass break sensors. It includes both the low-pitched "thud" of an object striking against the glass, as well as the high-pitched "shattering" sound that is most commonly associated with breaking glass.
In order to test one of your glass break sensors, start by putting your system on test mode with the central station. Next, pull up the YouTube clip on your phone, and set your phone's volume to its highest setting. Then play the clip in its entirety while you are within the detection range of your glass break sensor. If successful, the sensor will send an alert to the control panel to let it know that it has been activated. You might want to test the sensor from multiple locations to make sure that it will properly respond to glass breaking from different directions.
Keep in mind that if the glass break sensor does not activate during testing, it does not necessarily mean that your glass break sensor isn't working properly. It may just need to have its settings adjusted, or you may need to change its location. Also, it's very important to mention that we recommend using a conventional glass break simulator, such as a Honeywell FG701 or an Interlogix 5709C-W if possible. This sound clip is only alternative option if a user has no other way of testing their sensor. Although the clip should work well, it will not work as effectively as a legitimate testing device.
We hope this clip will be helpful for users who need to test their glass break sensors. If you need any help, please contact us at 888-818-7728 M-F from 9am to 8pm EST or email us any time at support@alarmgrid.com.