Industry News and Discussions Posts

After much anticipation Firmware Version 2.5.3 for the Qolsys IQ Panel 2 Plus is now available! This update brings support for the PowerG Wired to Wireless Converter, as well as some other new features. Everyone with an IQ Panel 2 is encouraged to download the update as soon as possible.

Support for the DSC PG9WLSHW8 PowerG Wired to Wireless Converter is the biggest new addition for Firmware Version 2.5.3. We covered the PowerG Wired to Wireless Converter extensively in a post last month. But just as a quick recap, the device allows to you to connect hardwired sensors so that they can communicate with the IQ Panel 2 Plus wirelessly across the PowerG protocol. This is an excellent way to upgrade from an older hardwired system, as it can prevent you from having to purchase entirely new wireless sensors.

The PG9WLSHW8 also includes all the benefits of PowerG. This includes a wireless range of up to 2,000 feet away from the IQ2+ in an open air environment, military grade 128-bit AES encryption, and Frequency Hopping Spread Spectrum (FHSS) technology for added protection. Up to eight (8) hardwired zones are built into a single converter, and you can use up to two (2) of the PG9WLSHW8 units per IQ2+ System. The unit even offers support for 2-wire or 4-wire smoke detectors, plus a 700mA supervised output for adding a wired siren.

Of course, IQ Panel 2 Firmware Version 2.5.3 includes a huge bundle of other new features and functions. Even if you don't plan on adding a DSC PG9WLSHW8 unit, there are still many other reasons to receive the upgrade. We'll touch on all the other new additions below.

The IQ2 system now has Panel Ambient Noise Detector settings to adjust noise threshold and duration. Qolsys added this feature with MDU settings where noise complaints are a concern. The feature can be used in-place of the panel's built-in glass break sensor. Alarm.com is planning to add back-end support for this feature sometime in the future.

Alarm.com commercial customers will be able to take advantage of their Smarter Business Temperature Monitoring (SBTM) service plan, which is used in conjunction with the DSC PG9905 PowerG Temperature Sensor. The SBTM service plan allows for 24/7 monitoring, real-time alerts, and historical temperature reporting. It is designed with businesses like restaurants, grocery stores, and pharmacies in mind. Alarm Grid customers with Alarm.com commercial accounts can contact us for more information. In addition, the IQ2+ can now display a trouble condition when an external probe is disconnected from the DSC PG9905.

If you use Alarm.com for solar energy monitoring, then you will be pleased to know that IQ Panel 2 Firmware Version 2.5.3 offers the ability to provide information from your solar inverter right on your security panel! Solar inverter units from SolarEdge and Enphase are supported. Please see this prior blog post for more info about Alarm.com Solar Monitoring.

Thinking ahead, Qolsys has made Firmware Version 2.5.3 compatible with future Z-Wave 700-Series daughter cards. The 700-Series of Z-Wave will represent the successor to Z-Wave Plus, also known as the Z-Wave 500-Series. Like all new iterations of Z-Wave technology, the 700-Series will allow for extended range and battery life when used with a compatible Z-Wave controller or hub. We hope to see 700-Series Z-Wave devices enter the market sometime in the not-so-distant future. Qolsys also made improvements to the IQ2 Z-Wave Diagnostics Map when using the Z-Wave 6.81 SDK to include RSSI values, as well as the ability to move automation device on the Diagnostics Map.

Some new 500-Series Z-Wave Plus devices are now supported by the IQ Panel 2. Most notably, these include Z-Wave switches from Eaton. Newly supported models include the RF9601, RF9617, RF9640-N, and RF9642-Z. It's good to see Qolsys increasing their support of compatible Z-Wave devices, and we have heard particularly nice things about the Z-Wave switches from Eaton and Cooper.

You can now disarm from the main IQ Panel 2 during the Exit Delay if the arming session was initiated from an IQ Remote, PowerG Keypad, or key fob device. Qolsys also added three (3) new Sensor Groups for keypads, key fobs, and panic switches. These new Sensor Groups include (3) Mobile Silent, (5) Fixed Silent Auxiliary, and (7) Mobile Silent Auxiliary. These new Sensor Group options should add some more versatility for these devices. And as for the Qolsys IQ Remote Keypad, it now has the ability to pair with IP routers using the Protected Management Frame (PMF) protocol.

There are some new changes to the Easy Install Wizard that loads upon booting up the system for the first time. A new drop-down option will allow you to select one of (13) languages for the setup wizard. There is also a new page in the wizard with QR links for you to scan using the camera on your Android or iOS phone to quickly download the Alarm.com Mobile App. Also added to the Easy Install Wizard are new help screens that provide more information on how to pair and test door and window contacts and motion detection sensors.

Some general improvements to the system's PowerG firmware have also been bundled with Firmware Update 2.5.3. The PowerG Modem Firmware is now Version 2.38. There is now support for Fire Trouble and Dirty Detector Trouble on the IQ2 and ADC when DSC PG9936 PowerG Smoke Detectors are used. Proximity tag support is now supported with the Visonic PowerG Wireless Keypads (models KP141 and KP241). And the Alarm.com back end can now show the "Not Networked" status for PowerG Sensors in the Event History. This occurs when a PowerG device is enrolled with the panel, but then fails to complete the network association and goes into RF sensor failure.

There are also some changes affecting certain PowerG Door and Window Contact Sensors. For the DSC PG9309 and DSC PG9312, both the reed switch and the auxiliary input can be disabled during disarm. The same also applies to the auxiliary input on the DSC PG9945. The purpose of this is to extend the battery life on high traffic doors. Additionally, the PG9945 and PG9309 can be learned-in with the IQ2+ twice. One zone will be for the sensor's internal reed switch, which the other will be used with the auxiliary input.

Other miscellaneous features have been added as well. LiveAnswer is now supported on the IQ2 for security cameras with non-standard aspect ratio streaming. New languages of German, Danish, Portuguese, Hungarian, and Romanian have all been added to the IQ Panel 2. The IQ2 will also now provide audible and visual indication of dual-path failures when the EN Grade 2 Setting is enabled. A change to the Swinger Shutdown feature has been made so that once a sensor reaches its Swinger Shutdown limit, a subsequent sensor event will tell the IQ2 to send an event notice to Alarm.com. Lastly, various improvements to the system have been made so that the IQ2 meets the EN50131-1 Standard.

Now that we have covered all of the new features included with Firmware Version 2.5.3, we can cover the process for upgrading your IQ Panel 2. Qolsys did things a little bit different this time. In order to download 2.5.3, your IQ Panel 2 or IQ Panel 2 Plus must be running a firmware version between 2.0.1 and 2.4.2. Do not attempt to download 2.5.3 if your IQ Panel 2 is running Firmware Version 2.5.0 or 2.5.1. If your IQ2 is on one of those firmware versions, then you must upgrade in stages by upgrading to Firmware Version 2.5.2 first, and then upgrading to Version 2.5.3. More information on upgrading to 2.5.2 can be found here.

If you need to check the firmware version for your panel, click the small grey bar at the top of the screen, and choose Settings > Advanced Settings > enter Installer Code (default 1111) > About > Software. You should see the firmware version displayed. The panel in the picture below is already on 2.5.3.

Once your IQ2 is on a firmware version of 2.0.1 to 2.4.2, or is on Firmware Version 2.5.2, then you can begin upgrading the Qolsys IQ Panel 2 Firmware Version 2.5.3. To begin, make sure your panel is monitored and connected with the Alarm.com servers via WIFI. The panel should be plugged into its AC outlet, and it should not have a low-battery condition.

When ready, you can perform the update by clicking the small grey bar at the top of the screen and selecting Settings > Advanced Settings > Installer Code (default 1111) > Upgrade Software > Patch Tag > enter iqpanel2.5.3 > OK > Upgrade Using Network. Then press OK when prompted. It will take about five (5) minutes for the update process to complete. The panel will reboot as part of the update process.

If you have any questions about the Qolsys IQ Panel 2 Plus, please reach out to us. Also remember to check out this post to learn more about our monitoring plans for gaining access to Alarm.com. The best way to contact us with questions about the IQ Panel 2 System or alarm monitoring in general is to email support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

Big changes are coming to the Z-Wave Alliance. The organization has established a new Standards Development Organization (SDO) structure to further improve upon the home automation technology. Qolsys and Alarm.com have both been named as founding members of the new Z-Wave SDO structure.

For anyone unfamiliar with the Z-Wave Alliance, it is a non-profit organization dedicated to developing and promoting Z-Wave technology. The newly formed SDO structure provides members with special opportunities to participate in the development of the popular home automation protocol. This includes new technical workgroups and committees with an emphasis on operational, technical, and marketing needs.

What excites Alarm Grid about the announcement is the inclusion of Qolsys and Alarm.com as founding members of the SDO structure. This is great news, as we expect both of these companies to contribute greatly in making Z-Wave technology even more accessible to users of security systems. This is great news for anyone who builds around their home or business alarm system for home automation functionality.

Alarm.com Chief Product Officer Dan Kerzner said of the news, "Alarm.com has used Z-Wave for more than a decade to help expand our platform so that millions of people can control and manage an ever-growing range of devices that work together to protect and automate their home or business... Along with the other founding members, we remain committed to shaping this evolving and impactful technology.”

In addition to Alarm.com and Qolsys, five (5) other companies have been named as founding members for the Z-Wave Alliance SDO structure. Alarm Grid has been eagerly awaiting the release of the next generation of Z-Wave devices, also known as the 700-Series. The current generation of Z-Wave, known as the 500-Series, or Z-Wave Plus, has proven to be a huge success in the field of home automation. We expect the Z-Wave Alliance to continue their triumphs moving forward, and this new organizational structure should only help.

Alarm Grid has always been major supporters of the Z-Wave Alliance and their work in promoting Z-Wave technology and educating automation professionals and end users alike. The group maintains an extensive list of Z-Wave-certified products, which includes technical information and specifications. If you ever want to learn more about the various Z-Wave products out there, we strongly recommend checking out their certified product database. You will likely need to find everything you know about your current Z-Wave home automation products, as well as any Z-Wave products that you may be considering in the future.

If you have any questions about how you can get started with Z-Wave technology and home automation, then please reach out to us! The ability to use Z-Wave devices like lights, locks, and thermostats is a fantastic perk of owning a security system. We offer many monitoring plans that will allow you to control your Z-Wave devices from anywhere, simply by using a mobile app or web browser. To learn more, send an email to support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

We have made a discovery regarding the compatibility for the Honeywell L5100-WIFI for LYNX Touch Systems. It turns out that L5100-WIFI units with the updated MAC prefix of B82CA0 can be used with Honeywell L5100 Systems running a firmware version of at least 5.00838, but less than 5.05000.

If you aren't familiar with the Honeywell L5100-WIFI, it is an internet communicator that allows a compatible Honeywell LYNX Touch Panel to communicate with the Resideo AlarmNet Servers across an IP (internet protocol) network. The L5100-WIFI accesses the internet by connecting with a local WIFI network. Many users rely on the L5100-WIFI for inexpensive IP monitoring service. The communicator can also be used to set up the LYNX Touch System with Total Connect 2.0, provided that the user's alarm monitoring plan includes access to the platform.

If you recall back in the summer of 2018, it was announced that new Honeywell L5100-WIFI units had an updated MAC prefix, as it was changed from 00D02D to B82CA0. This had several implications. Starting with LYNX Touch Firmware 5.05000, Resideo locked the required MAC prefix so that only L5100-WIFI units with 00D02D were supported. This was later revised in Firmware Version 8.00183 to support the new MAC prefix of B82CA0. As a result, LYNX Touch Systems with a Firmware Version of at least 5.05000, but less than 8.00183, cannot support newer L5100-WIFI units with the MAC prefix of B82CA0. For LYNX Touch firmware in Canada, the required MAC prefix of 00D02D became locked with Firmware Version 5.15000.

However, we didn't realize that LYNX Touch Systems running firmware versions below 5.05000 (and below 5.15000 for Canadian models) do not have the locked MAC prefix requirement. This means that if you have a Honeywell LYNX Touch System with a firmware version of less than 5.05000, then you can use it with a newer L5100-WIFI unit with a MAC prefix of B82CA0. It still must meet the minimum firmware requirement to support the L5100-WIFI (Firmware Version 5.00838), but this allows for some new monitoring possibilities. Most notably, it allows certain Honeywell L5100 units use either the new L5100-WIFI model with the updated MAC prefix or the old model with the old MAC prefix.

In spring of 2019, it was announced that Resideo was no longer allowing Honeywell LYNX Touch Panels to receive over-the-air (OTA) firmware updates. Instead, firmware updates could only be applied locally using the Honeywell LYNXTOUCH-MSD Firmware Updater Tool. Initially, the updater tool was only compatible with the Honeywell L5210 and Honeywell L7000, but it was later made compatible with the Honeywell L5200 as well. But the updater tool was never made compatible with the Honeywell L5100. This makes it impossible to update the firmware for a Honeywell L5100 Security System, and there is no way to get the system onto Firmware Version 8.00123 or higher.

But since Resideo didn't begin locking the required MAC prefix to 00D02D until 5.05000, an L5100 running a firmware version of at least 5.00838, but less than 5.05000, can support all L5100-WIFI units, regardless of their MAC prefix. Therefore, if you have an old Honeywell L5100 System lying around that you were thinking could never be monitored again unless you found a used L5100-WIFI with the old MAC prefix, it may be a good idea to check its firmware to see if it falls in that range.

If you want to check the firmware for a Honeywell L5100, you can do so by choosing Security > More > Tools > enter your Master Code (default 1234) > Test. The firmware revision will be displayed at the top of the screen. This process is the same for any LYNX Touch System, so you can also use this method to check your L5200, L5210, or L7000 firmware. Below is a picture of a Honeywell L7000 on Firmware Version 9.00209..

If you find that your L5100 is running a firmware version of 5.05000 or higher (5.15000 or higher in Canada), then you will be limited to using the older L5100-WIFI with the MAC prefix of 00D02D. With any luck, you may be able to find a used model somewhere with the older prefix. But should your L5100 be running a lower firmware, then the system will be able to support any L5100-WIFI model, including the new ones that you can purchase from Alarm Grid. This is an excellent way to get an old L5100 System set up with low-cost IP monitoring.

Of course, if you have an L5200, L5210, or L7000, then it is recommended that you get the Honeywell LYNXTOUCH-MSD Firmware Updater Tool to upgrade the system firmware to the latest version. The latest firmware is 9.0213 at the time of this writing. Updating to the latest firmware version is always recommended. And as long as the firmware version is 8.00183 or higher, the system can support all versions of the L5100-WIFI, regardless of the MAC prefix.

If you have any questions about the L5100-WIFI or the Honeywell LYNX Touch Systems, then please reach out to us! We are best contacted via email at support@alarmgrid.com. Our hours for checking email run from 9am to 8pm ET M-F. This is also a great email to reach us if you are interested in starting new monitoring service. We look forward to hearing from you!

Alarm Grid is thrilled to offer the brand-new Resideo Tuxedo Keypad! This sleek and modern keypad serves as a touchscreen controller for your Honeywell VISTA, while also providing Z-Wave Plus home automation capabilities. This will truly bring out the full potential of your VISTA Panel!

The new Resideo Tuxedo represents the third generation in the Honeywell Tuxedo Touch Series. The original Honeywell Tuxedo Touch, the Honeywell Tuxedo Touch WIFI, and the Honeywell VAM have all been discontinued to make room for the new Resideo Tuxedo. While we are a little sad to see these classic products be sent off to the "product graveyard", we are extremely excited about this brand-new keypad and what it brings to the party.

If you are familiar with the Honeywell 6290W Touchscreen Keypad that came out last September, then you will be pleased to learn that the new Resideo Tuxedo offers the exact same look and user interface (UI). In fact, the only difference between the two is the fact that the Tuxedo offers Z-Wave Plus functionality, while the 6290W is just a keypad for controlling the VISTA. With the Tuxedo, you get all of the same security functions from the 6290W (e.g. arming, disarming, bypassing zones), as well as awesome new home automation controls.

The great thing about a touchscreen keypad like the Resideo Tuxedo is that it can make your system much less intimidating and easier to control. This can be especially important for new users who are not used to working with a security system, especially one that uses a classic numeric keypad that requires specific knowledge to operate. The Tuxedo is easy to navigate, and the full-color menus can give a new user confidence in controlling their system. Most experienced users also appreciate touchscreen keypads just due to their overall ease of use.

You certainly have a great deal of automation devices that you can pair with the Resideo Tuxedo. Nearly any Z-Wave device can integrate with the keypad. You can add Z-Wave lights so that it looks like you're home while on vacation. A Z-Wave door lock can be helpful for letting your friend inside without getting up from the couch. And a Z-Wave thermostat can help you save a ton of money in energy costs, while still keeping your home comfortable. The unit supports up to 232 Z-Wave devices, so you're highly unlikely to run out of room. We recommend using exclusively Z-Wave Plus devices to build the strongest network possible.

WIFI connectivity returns to the new Resideo Tuxedo. The keypad uses its WIFI connectivity for communicating with Total Connect 2.0. You can access TC2 to control your programmed automation devices remotely from a mobile app or web browser. The WIFI connection is also how firmware updates are applied to the Tuxedo Keypad. You can alternatively use a wired ethernet connection instead of wireless WIFI, but come on, who's gonna do that? Just be aware that the Tuxedo is not an AlarmNet Communicator. You will still need a separate alarm communicator for your VISTA System and a monitoring plan to access Total Connect 2.0.

And there are many other features and specifications that we love about the new Tuxedo. This keypad and automation controller boasts a 7-inch screen with a 480 x 640 resolution. The thin-film-transitor (TFT) LCD screen is backlit, so you will have no trouble using it at night. Other features include voice and chime, a weather display, the ability to live-stream security cameras, Console Mode, a digital picture frame, and more!

You can buy the new Resideo Tuxedo Keypad from Alarm Grid right now. We are sure that you will love using this robust and powerful keypad in your home or office. It really has a nice modern look that can fit in nicely with any decor. This is truly a great way to improve upon a VISTA System. If you have any questions about the Tuxedo, or if you want to learn more about alarm monitoring, contact us via email at support@alarmgrid.com. We check our email during our business hours of 9am to 8pm ET M-F. We look forward to hearing from you!

According to a recent report, most Americans have yet to embrace smart home technology. Just 35% of US households have at least one smart home device. Needless to say, adding some automation devices to your home can really put you ahead of the game and make your life more convenient.

The recent study included smart home devices such as security cameras, smart doorbell cameras, smart lighting devices, smart controllers, smart door locks, smart garage door controllers, smart thermostats, and more. The findings state that security cameras represent the most popular smart home item, as they are used by 15% of households. But doorbell cameras are showing the fastest growth, as their use has increased by 64% in the past year.

It should also come as no surprise that the study found high income homes more likely to feature smart home devices. Specifically, it was found that households with an annual income of $150,000 or higher are the most likely to own a broad portfolio of smart home devices. While it's true that smart home devices are generally seen as "luxury items", they are becoming increasingly affordable and accessible to more households than ever before.

While we suspected that the prevalence of smart home devices would be somewhat lacking, we did not expect the figures to be this low. It's clear that there is still much potential for the growth of the smart home industry. With about 65% of households reporting no smart home devices, we are sure that many people could really make their lives more convenient by adding just a few. Security-oriented devices like cameras can also provide major benefits.

What many people don't realize is that smart home devices are actually more accessible than ever. They aren't only restricted to the wealthy. Most middle class households can also get started with home automation. And it doesn't mean you need to deck out your entire house with smart home devices. Many users start small. Maybe you would just add some smart lights to an important room, or you could install a camera to monitor the entrance.

Alarm Grid offers many security systems that feature outstanding smart home integrations, such as the Honeywell Lyric and the Qolsys IQ Panel 2 Plus. And with the right monitoring plan, you can even control your smart devices remotely from virtually anywhere in the world. Whether your smart home plans are big or small, we're here to help you get started. There are all sorts of possibilities when you explore the exciting world of smart home automation!

If you want to learn more about how you can create an affordable and effective smart home to make your life more convenient, send an email to support@alarmgrid.com. Also check out our monitoring page to learn more about the services we offer. If you decide to email us, then keep in mind that our hours for responding via email run from 9am to 8pm ET M-F. We look forward to helping you build a convenient smart home that you and your family will love!

Nationally Recognized Testing Laboratory UL is currently working to revise the UL-827 Standard for Central Station Alarm Services. This is being done to better accommodate remote workers amid the pandemic. The changes will ensure that remote operators can perform their duties effectively.

Because of the ongoing COVID-19 health pandemic, many central monitoring stations are continuing to have their operators work from home. UL is making changes to their UL-827 Standard to ensure that consistent provisions and protection measures are always enforced, regardless of whether an operator is working from home or at a monitoring center.

If you are unfamiliar with UL-827, it refers to the strict standards that a central monitoring station must meet in order to receive UL certification. The official central station partner of Alarm Grid, Criticom Monitoring Services (CMS), is UL certified. CMS will be required to comply with these new provisions once they are put into effect. CMS is extremely diligent about these matters, and we would imagine that they have already begun taking steps towards complete compliance with new UL mandates.

The revisions to UL-827 are still a work in progress, and no mandate has been finalized as of yet. However, we do have eight (8) mandates that are virtually guaranteed to be put into effect. We have the essence of these 8 mandates outlined below:

1. Off-site monitoring will be permitted when there is a disruption event.
2. Off-site monitoring will be discontinued within (14) days of the disruption event being declared over.
3. While off-site monitoring is in effect, some staff will remain at the central station to maintain and support necessary equipment, such as receivers, automation systems, emergency generators, etc.
4. Remote operators will remain connected with the central station using a secure pathway that uses at least 256-bit AES encryption.
5. A central station must enforce multi-factor authentication for remote operators to access its network and automation system.
6. Any remote operator workstation must not be used for personal use. It will remain the property of the monitoring company.
7. Remote operator workstations must be set aside in a separate area of the home to not allow any unauthorized viewing and/or distraction of remote operators.
8. Remote operators and on-duty managers will maintain continuous communication while off-site monitoring is in effect.

Not every issue regarding the matter has been fully addressed. UL is still working to address matters concerning standby power, wired vs. wireless connectivity between the remote operators and the central station, and issues regarding approval from the authority having jurisdiction (AHJ). We believe that these new mandates will go into effect as soon as UL works out the details.

Although these protection measures were drafted in light of the COVID-19 health pandemic, they were also written in such a way that they can be enforced in the event of any other disruption that prevents operators from all gathering at a central station. We appreciate the insight taken by UL in that regard, as we are certainly in the midst of uncertainty.

Alarm Grid supports these measures that UL is set to introduce. We take great pride in ensuring our monitored customers that they will always receive the same level of protection and security. We understand that monitoring centers like CMS cannot safely operate with their full staff on-site during these times. The changes will help to guarantee that consistent measures are in-place, regardless of whether a trained central station operator is working from home or at the monitoring center. We applaud UL for quickly taking the initiative during these times.

As a monitoring provider, we want our customers to feel completely comfortable and confident with the central station services we offer. Providing peace of mind to end users is always one of our top priorities. If you have any questions or concerns regarding central station monitoring, please reach out to us by emailing support@alarmgrid.com. We would love to answer any questions that you might have. Remember that our business hours run from 9am to 8pm ET M-F. We look forward to hearing from you!

2GIG GC2e and 2GIG GC3e users have some new options available, as two (2) new products have been added to the growing 2GIG eSeries Lineup. These are the 2GIG TAKE1e-345 Wired to Wireless Converter and the 2GIG TILT1e-345 Tilt Sensor. Both products are available now from Alarm Grid.

If you are not yet familiar with the 2GIG eSeries Sensors, they offer a more secure wireless connection than the non-encrypted 2GIG 345 MHz Sensors. By utilizing wireless encryption, the 2GIG eSeries devices are nearly impossible for potential intruders to disrupt or takeover wirelessly. This can provide added peace of mind for end users. Just keep in mind that the 2GIG eSeries Sensors will only work with the 2GIG GC2e and 2GIG GC3e. They are not backwards compatible with the older 2GIG Panels, like the 2GIG GC2 and 2GIG GC3.

The 2GIG TAKE1e-345 Encrypted Wireless Takeover Module is a wired to wireless converter that is primarily used when upgrading to a GC2e or GC3e from an older wired alarm panel. When setting up the 2GIG TAKE1e-345, it is recommended that you keep the existing panel in place. This is because the TAKE1e-345 will draw power from the exiting panel, as the unit does not come with its own power supply. Once the device is set up properly, your existing wired sensors will be able to communicate with your GC2e or GC3e across an encrypted wireless protocol.

The 2GIG TILT1e-345 Encrypted Tilt Sensor is a tilt sensor designed primarily to monitor garage doors. The device works by sending an alert signal to the panel whenever the unit is tilted more than 45 degrees. Normally, the TILT1e-345 is mounted vertically on top of a garage door. When the garage door is opened, the sensor will shift to a horizontal position. This will trigger the sensor and tell it to alert the panel. Other potential uses for the 2GIG TILT1e-345 include use on mailboxes, pet doors, and hinged crawl space doors. Really, any structure that opens vertically can make use of the sensor.

Both of these great sensors are now available from Alarm Grid. If you have any questions about the 2GIG TAKE1e-345 or the 2GIG TILT1e-345, or if you want to learn more about how you can monitor your 2GIG GC2e or 2GIG GC3e, then please contact our team by emailing support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

False security system alarms have been a hot topic in Georgia lately. A recent court ruling upheld the decision to allow the city of Sandy Springs, GA to charge monitoring companies for false alarms. Now, it appears that the city of Lawrenceville is looking to take similar action.

Reports indicate that officials in Lawrenceville, GA are currently working with a third-party company to build a registry of all alarm systems in the city. This will include all alarm systems used in Lawrenceville homes and businesses. From there, an ordinance will be developed, with the goal of "cutting down on false alarms".

Specific details regarding such a proposed ordinance are not available at this time. However, it has been said that the ordinance would be designed to "bring revenue to the city". It is fair to expect that the proposed ordinance would include fines for causing false alarms, as well as fines for failing to register a system. It's also possible that Lawrenceville may take a page from nearby Sandy Springs, GA and invoke fines against monitoring companies.

As a general rule, Alarm Grid is against charging fees for permits to operate security systems. These fees only make it more difficult for users to lawfully install alarm systems to protect their homes and businesses. We understand the need to register alarm systems for false alarm prevention purposes. But charging fees makes the process harder for end users. Instead, we propose free system permits for those operating alarm systems responsibly.

Even worse is when a local jurisdiction charges a monitoring company for a false alarm caused by an end user. Any responsible monitoring company should give its customers the resources and tools they need to prevent false alarms. When a false alarm occurs, it is almost always due to a mistake made by the end user. Charging a monitoring provider for the actions of an end user is unfair. In recent times, both Tennessee and Iowa have passed laws to prevent local jurisdictions from charging monitoring providers.

Alarm Grid does not take false alarm prevention lightly. It does not make us look good as a monitoring provider if our customers are repeatedly causing false alarms. The last thing we want to do is waste the time and resources of local jurisdictions. That is why we strive to educate our customers so that they understand how their systems work and how to properly prevent false alarms. We know that most false alarms are innocent mistakes, and most users are not seeking to actively cause false alarms. We urge jurisdictions like Lawrenceville to consider these aspects.

From what we can tell, Lawrenceville, GA is looking into this matter very seriously. It is our hope that if and when they do pass an ordinance that it is fair for both end users and alarm monitoring providers. In our view, this should include no-cost permitting. If fines for false alarms are also included in the ordinance, then they should be reasonable and offer a no-fee warning for an initial false alarm. Additionally, no false alarm fines should be charged against the monitoring providers who are ultimately not the ones controlling the systems.

For more information on preventing false alarms, we strongly recommend checking out this helpful guide we wrote. It offers various tips and guidelines for preventing false alarms on security systems. If you have any further questions or concerns about preventing false alarms, or if you are wanting to learn more about Alarm Grid monitoring service, then please email us at support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. Our team looks forward to hearing from you!

Alarm Grid has learned that Johnson Controls has acquired the remaining stake of Qolsys. Johnson Controls now fully owns Qolsys. The press release from Qolsys states that all key Qolsys leaders and founders will remain at the company's Silicon Valley headquarters in San Jose, CA.

Jeff Williams, President of Global Products for Johnson Controls said of the acquisition:

"Qolsys has grown from a startup to a leading security platform provider with over 4,000 dealers and service providers worldwide. Johnson Controls sees long-term opportunities to bring Silicon Valley innovation and culture to our broader cloud-enabled IoT solutions in building management, fire and HVAC businesses... The opportunity to acquire Qolsys allows Johnson Controls to achieve operational efficiencies and scale across our global markets."

Johnson Controls had already owned the majority of Qolsys. This latest acquisition now puts the entire company under the ownership of Johnson Controls. In addition to Qolsys, the Johnson Controls banner also includes the likes of DSC, Bentel, Visonic, PowerG, and Tyco. The company has certainly assembled an extensive collection of security products and namesakes. Now with Qolsys fully under their control, their expansion should only continue.

As part of the move, Qolsys CEO Dave Pulling will transition to the role of Vice President and General Manager of Global Intrusion Products for Johnson Controls. According to Pulling, Johnson Controls will remain committed to serving existing Qolsys users, while also setting their sights on potential global growth. As for the Qolsys namesake, it shouldn't be going anywhere, and it will continue to represent various panels, sensors, and accessories.

Interestingly, the bottom of the press release from Qolsys hints at a "fourth generation IQ Panel", with a very vague release date of 2021. The press release states that the Fourth Gen IQ Panel will feature a "Qualcomm Chipset with support for AI, M2M, and Next Generation Connectivity". This is the first we've heard about a 4th-gen IQ Panel, but it really sounds like exciting news. We don't have any other details about a 4th-gen Qolsys IQ Panel at this time, but we will definitely keep our eyes open for more news.

Qolsys is currently known for their state-of-the-art IQ Panel 2 Plus. The company is set to release the lower-cost Qolsys IQ Hub later this year, which will represent the "third gen" in the IQ Panel lineup. Also on the roadmap for Qolsys is the upcoming Qolsys IQ Router. And last month's release of the DSC PowerG Wired to Wireless Converter was big news for many Qolsys IQ Panel 2 Plus users. It goes without saying that the company has been frequently making some big waves in the security industry.

Alarm Grid has frequently praised Qolsys Panels for their intuitive designs and simple user interfaces (UIs). We have found that the IQ Panel 2 serves as a great option for new users who aren't necessarily accustomed to, or experienced in, operating alarm systems. We hope that this will continue for Qolsys, even as they are now operating fully under the Johnson Controls banner. Many end users appreciate having easy-to-operate security systems greet them in their homes and businesses. Our hope is that Johnson Controls and Qolsys do not lose sight of that vision.

If you have any questions about the Qolsys IQ Panel 2 Plus, or any other security product from Johnson Controls, or if you want to learn more about monitoring service, please send an email to our team at support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

We have learned that Qolsys has released a fix for the 6.81.03 Z-Wave Firmware for the IQ Panel 2 and IQ Panel 2 Plus. With this fix, the 6.81.03 Z-Wave Firmware is once again available for download for any Qolsys IQ Panel 2 or IQ Panel 2 Plus running System Firmware Version 2.4.2 or higher.

The saga regarding Z-Wave Firmware 6.81.03 for the IQ Panel 2 has been ongoing for quite awhile now. For anyone who isn't fully in the loop, we will provide a brief recap of the events.

In September of last year, Qolsys released IQ Panel 2 Firmware Version 2.4.0. Any newly manufactured IQ Panel 2 Plus System with 2.4.0 or higher pre-installed would have the 6.81.03 Z-Wave Firmware already pre-installed out of the box. Those with an older IQ Panel 2 or IQ Panel 2 Plus System that had been upgraded from a lower system firmware version would need to separately update the Z-Wave firmware for the system if they wanted to use the associated features.

To be clear, updating the Z-Wave firmware on an IQ Panel 2 or IQ Panel 2 Plus is optional. The 6.81.03 Z-Wave Firmware only provides the Smart Start feature for enrolling compatible devices via a scanned QR code, and it upgrades the panel's automation security protocol from S0 to S2. If a user doesn't need and/or doesn't care about these features, then skipping the update is fine. Unlike panel firmware for the IQ2, the system's Z-Wave firmware isn't as important to have on the latest version. Many users chose to skip the update entirely. And that remains the case now. If you do not want the update, then you do not need to apply it.

Later, in July 2020, Qolsys discovered problems with Z-Wave Firmware Version 6.81.03. Once this happened, Qolsys took the associated patch tag off the network so that it could no longer be downloaded. But now that Qolsys has corrected the associated issues, the update is once again available for download. Anyone who performs the upgrade now will download an updated version of the 6.81.03 Z-Wave Firmware to the panel. This updated version does not have the problems and issues that were associated with the earlier version, even though they are both referred to as Z-Wave Firmware 6.81.03.

Of course, there are some users who still have the faulty version of the 6.81.03 Z-Wave Firmware on their panels. For these users, the problem can be corrected by performing a system firmware update for the IQ Panel 2. In other words, upgrading to the latest system firmware (2.5.2) with the 6.81.03 Z-Wave Firmware already installed will update the panel's Z-Wave firmware from the faulty version of 6.81.03 to the newly updated version that has the fixes applied. Users who were already running 2.5.2 at the time they applied the faulty Z-Wave firmware patch, will need to wait for the next firmware release to fix the problem. According to Qolsys, their IQ Panel 2 System Firmware Version 2.5.3 will be made available later this month. More information on IQ Panel 2 System Firmware can be found on this helpful page.

We understand that this may be a bit confusing, so we have broken IQ Panel 2 and IQ Panel 2 Plus users into three (3) categories. Find the bold statement below that applies to you, and follow the corresponding instructions. It may also be helpful to check and see whether or not your IQ Panel 2 is on Z-Wave Firmware 6.81.03. To do this, press the small grey bar at the top of the main screen, and choose Settings > Advanced Settings > enter Installer Code (default 1111) > About > Z-Wave. You should see the current Z-Wave Firmware listed.

1. My IQ Panel 2 is NOT on Z-Wave Firmware 6.81.03.

If your IQ Panel 2 is not on Z-Wave Firmware Version 6.81.03, then that tells us two things. For one, it means that the panel was originally manufactured with a system firmware version of less than 2.4.0. Second, it also means that no updates to the system's Z-Wave firmware have ever been applied.

Since you haven't updated the Z-Wave firmware for the system before, you can apply the update as normal. You will be downloading the newly updated 6.81.03 that has the proper fixes applied. Please see this helpful FAQ for more information about applying the patch tag.

Remember, your IQ Panel 2 must be on at least System Firmware Version 2.4.2 to apply the 6.81.03 Z-Wave Firmware. If your system is not on a high enough firmware, then now is a great time to update to the latest system firmware version, which is Version 2.5.2. Alternatively, you might choose to wait a few weeks for System Firmware Version 2.5.3, since it's coming so soon.

Another option is to just skip the Z-Wave update entirely. The older "pre-6.81.03" Z-Wave firmware versions are very stable, and they generally work great. All you are getting by updating the Z-Wave firmware is access to the Smart Start feature and an upgrade for your system's Z-Wave Security Protocol (from S0 to S2). If you do not care about these updates, then you can simply take no action.

2. My IQ Panel 2 is on Z-Wave Firmware 6.81.03, but I'm not on the latest System Firmware 2.5.2.

Your panel is on Z-Wave Firmware Version 6.81.03 either because it was manufactured that way, or because a Z-Wave firmware update was manually performed. In either case, the 6.81.03 Z-Wave Firmware Version your system is running is flawed, and we strongly advise applying a fix. There is no way to "downgrade" to an older Z-Wave firmware, so you must apply the newly fixed 6.81.03 Z-Wave Firmware to the panel.

Luckily, Qolsys made it very easy to fix the issue for users in this situation. All you need to do is update the system firmware to the latest version. By updating to System Firmware 2.5.2 with the 6.81.03 Z-Wave Firmware already installed, the appropriate fix will be applied so that your system's Z-Wave firmware will work in the proper manner. We recommend checking our IQ Panel 2 Plus System Firmware Updates Page for more information.

3. My IQ Panel 2 is on Z-Wave Firmware 6.81.03, AND I'm already on System Firmware 2.5.2.

Since your system is already on the latest firmware, you cannot perform a firmware update to fix the issue. Any user in this situation will not be able to take any action towards fixing their faulty Z-Wave firmware until Qolsys releases IQ Panel 2 System Firmware Version 2.5.3. Once 2.5.3 is available, you can download that Z-Wave firmware, and the updated 6.81.03 Z-Wave Firmware will also be automatically applied at that time. Qolsys says that System Firmware 2.5.3 will be made available later this month. Alarm Grid will post an update blog once 2.5.3 is available, so make sure to stay tuned.

UPDATE: Qolsys IQ Panel 2 Plus Firmware Version 2.5.3 is now available! Please see this blog post for more information.

We understand that this is a lot of information to take in for a relatively simple issue. If you need any clarification regarding the issue, or if you want to learn more about our monitoring services, please email us at support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!