Alarm Grid Video Recap: July 15 - July 22

Posted By

We're back again with four (4) more videos. We rejoin Jorge and Michael with videos on the 2GIG Edge and the Honeywell Home PROA7PLUS. Michael discussed the PROA7PLUS support for 5800 series sensors. Jorge provides several tutorials on the 2GIG Edge. Enjoy these videos from Alarm Grid.

Honeywell Home PROA7PLUS: Compatible with Honeywell 5800 Series Sensors

In this video, Michael from Alarm Grid discusses the Honeywell Home PROA7PLUS' support for Honeywell's legacy 5800 Series Wireless Lineup. In order for the panel to support these sensors, a Honeywell Home PROTAKEOVER module must be installed. This module allows the panel to support one (1) of five (5) legacy RF frequencies. Only one (1) PROTAKEOVER is supported per panel.


2GIG Edge: Compatibility With 2GIG Sensors

In this video, Jorge discusses the ability of the 2GIG Edge to support both encrypted and unencrypted 2GIG Sensors. It may seem as though it should go without saying that a 2GIG panel supports 2GIG Sensors, but with newer panels supporting encrypted sensors, and new sensor lineups, it's good to be 100% sure before making a purchase, particularly if you have existing 2GIG sensors installed. The 2GIG Edge supports all of the 2GIG sensors.


2GIG Edge: Z Wave Support

Jorge is back again to talk about how the 2GIG Edge supports Z-Wave devices. This panel has the most advanced version of Z-Wave currently available with the 700-Series Z-Wave Plus V2 chip onboard. When used with a commensurate 700-Series Z-Wave device, all of the great new features that are included in this latest version. Some of these features include S2 encryption for all Z-Wave Plus V2 certified devices as well as SmartStart and 128-bit AES encryption. You can see a comparison between all three Z-Wave versions here.

2GIG Edge: Default Master Code

Jorge really knows his stuff when it comes to the 2GIG Edge! Here he is talking about the default Master Code on the 2GIG Edge (1111) as well as information on how to change the Master Code and also what the default Installer Code is (1561). If you happen to be moving and leaving behind an alarm system, please check out this post that discusses proper etiquette when leaving behind an alarm system for a new home or business owner.


That's the recap, we hope these videos will help you with your alarm system. We look forward to feedback, if you have comments or suggestions drop us a comment in the space below. We're here Monday - Friday from 9 am - 8 pm Eastern. You can reach us via email at support@alarmgrid.com

Tags: , , , , , , , , , , , , ,

Comments


Related Products

Resideo PROA7PLUSC - Commercial Wireless Security System
Resideo PROA7PLUSC
Commercial Wireless Security System
List Price: $388.00
Our Price: $271.99
Resideo PROA7C_HON - ProSeries 7" All-In-One Alarm Panel
Resideo PROA7C
ProSeries 7" All-In-One Alarm Panel
List Price: $290.00
Our Price: $179.99
Honeywell Home PROA7-HON - ProSeries 7" All-In-One Alarm Panel
Honeywell Home PROA7
ProSeries 7" All-In-One Alarm Panel
List Price: $290.00
Our Price: $179.99
Honeywell Home PROA7PLUS - Next Generation Wireless Security System
Honeywell Home PROA7PLUS
Next Generation Wireless Security System
List Price: $388.00
Our Price: $240.99
2GIG Edge w/ Verizon LTE - Wireless Alarm Control Panel
2GIG Edge w/ Verizon LTE
Wireless Alarm Control Panel
List Price: $568.00
Our Price: $425.99
2GIG Edge w/ AT&T LTE - Wireless Alarm Control Panel
2GIG Edge w/ AT&T LTE
Wireless Alarm Control Panel
List Price: $568.00
Our Price: $425.99