Alarm Grid Video Recap: May 13 & 14
Posted By Michael GorisWelcome to a special Tuesday edition of an Alarm Grid Video Recap! We normally do these on Mondays, but we pushed this one back a day due to the time-sensitive nature of yesterday's post. Make sure to go and check that one out if you use the Nest Thermostat integration for Alarm.com.
As for today's video recap, it's mostly just business as usual. We have three (3) new videos today, all of which feature the 2GIG Edge. This innovative and feature-rich security system has certainly kept us busy and given us a lot to explore and share with you. We have even received some comments from users on YouTube asking us to cover specific 2GIG Edge features and functions. If you have anything that you would like to see from Alarm Grid, then make sure to leave a comment on this post down below. There's a great chance that you will see it in a future Alarm Grid video!
We know that you're on the EDGE of your seat waiting to see these new 2GIG EDGE videos, so let's get started! Here are the latest tutorial videos from Alarm Grid:
2GIG Edge: Clearing a Tamper Error
I show you how to clear a tamper error trouble condition from the 2GIG Edge. A tamper error occurs when the panel's internal tamper switch is not held down probably. This is usually the result of the panel being opened. When the issue occurs, a trouble notification will appear as a yellow circle with number inside it. Also, the panel will begin emitting a soft beeping sound. Once you properly close the panel so that the tamper switch is pressed down, the trouble notification will go away, and the beeping will cease.
2GIG Edge: Adding a Z Wave Device
I show you how to pair a Z-Wave device with a 2GIG Edge. Inside every 2GIG Edge is a Z-Wave Plus V2 700-Series Controller. This allows users to enroll a wide selection of Z-Wave peripherals, such as smart lights, door locks, programmable thermostats, and more. Z-Wave devices can be controlled locally at the panel, plus remotely from Alarm.com if the system is monitored with a plan that includes automation services. You can also create customized Alarm.com Smart Scenes to have your Z-Wave activate automatically.
2GIG Edge: Removing a Z Wave Device
I show you how to clear a device from the Z-Wave network using the 2GIG Edge. When you remove, or clear, a Z-Wave device, you are wiping out all its Z-Wave network data. This will allow the device to pair with a new Z-wave controller or hub. A user will typically remove a Z-Wave device if they no longer intend on using it. However, a user should also perform the clearing process before attempting to pair a device. This will ensure that no residual Z-Wave network data remains lingering inside the device.
