Julia Ross Posts

We're back again with four (4) more videos. We rejoin Jorge and Michael with videos on the 2GIG Edge and the Honeywell Home PROA7PLUS. Michael discussed the PROA7PLUS support for 5800 series sensors. Jorge provides several tutorials on the 2GIG Edge. Enjoy these videos from Alarm Grid.

Honeywell Home PROA7PLUS: Compatible with Honeywell 5800 Series Sensors

In this video, Michael from Alarm Grid discusses the Honeywell Home PROA7PLUS' support for Honeywell's legacy 5800 Series Wireless Lineup. In order for the panel to support these sensors, a Honeywell Home PROTAKEOVER module must be installed. This module allows the panel to support one (1) of five (5) legacy RF frequencies. Only one (1) PROTAKEOVER is supported per panel.

2GIG Edge: Compatibility With 2GIG Sensors

In this video, Jorge discusses the ability of the 2GIG Edge to support both encrypted and unencrypted 2GIG Sensors. It may seem as though it should go without saying that a 2GIG panel supports 2GIG Sensors, but with newer panels supporting encrypted sensors, and new sensor lineups, it's good to be 100% sure before making a purchase, particularly if you have existing 2GIG sensors installed. The 2GIG Edge supports all of the 2GIG sensors.

2GIG Edge: Z Wave Support

Jorge is back again to talk about how the 2GIG Edge supports Z-Wave devices. This panel has the most advanced version of Z-Wave currently available with the 700-Series Z-Wave Plus V2 chip onboard. When used with a commensurate 700-Series Z-Wave device, all of the great new features that are included in this latest version. Some of these features include S2 encryption for all Z-Wave Plus V2 certified devices as well as SmartStart and 128-bit AES encryption. You can see a comparison between all three Z-Wave versions here.

2GIG Edge: Default Master Code

Jorge really knows his stuff when it comes to the 2GIG Edge! Here he is talking about the default Master Code on the 2GIG Edge (1111) as well as information on how to change the Master Code and also what the default Installer Code is (1561). If you happen to be moving and leaving behind an alarm system, please check out this post that discusses proper etiquette when leaving behind an alarm system for a new home or business owner.

That's the recap, we hope these videos will help you with your alarm system. We look forward to feedback, if you have comments or suggestions drop us a comment in the space below. We're here Monday - Friday from 9 am - 8 pm Eastern. You can reach us via email at support@alarmgrid.com

On Friday, July 30, 2021, Alarm Grid's monitoring partner CMS announced that this week their standard procedure for handling environmental alarms will officially change. Going forward, environmental alarms will receive one call to each specified number, with a message left where possible.

In the past, it was CMS's standard procedure on environmental alarms to continue calling all available numbers on the customer's specified contact list until a responsible party was reached and had acknowledged the alarm. Processing of the alarm was not considered complete until the operator had contacted and spoken to the property owner, or one of their designees. CMS had reason to review this policy recently, and as a result the standard procedure has been modified.

Going forward, when an environmental alarm is received CMS representatives will attempt to contact all specified numbers on the call list one (1) time. When a contact on the call list can't be reached, if the representative has an opportunity to leave a message, they will. But at that point no further calls to that number are scheduled. The representative will go through the call list in this manner until all numbers specified for environmental alarms have been called with no one being reached and messages left where possible. At this point, processing of the environmental alarm is considered complete.

If the representative receives an answer, they will notify the answering party of the alarm and no further calls will be made. At that point alarm processing is considered complete. All of this information: numbers called, messages left or not, persons reached will be noted to the account. After one (1) call to each number with no one being reached and notations being made in the customer's account regarding messages left, the alarm will be considered finalized with no further action being taken by the CMS representative.

Environmental alarms may include such things as flood detection, and freeze detection. These types of alarms don't customarily require the dispatch of authorities, but a home or business owner usually wants to be notified about them as soon as possible to avoid costly property damage.

The monitoring stations's standard operating procedure for any alarm type will determine how that alarm type is treated in the absence of any other instructions. What this means is, if a customer wants an environmental alarm to be treated differently than what is described above, they can request an alternative procedure. As long as the request is within reason, CMS will gladly follow those instructions rather than their standard procedure. If a request cannot be honored, due to legal issues or company policy, CMS will explain why, and allow the customer to adjust the request until a suitable procedure is determined.

We missed an opportunity to recap videos last week, but that just means we have more videos to cover this week. Six (6) today, with more to follow. Michael and Jorge share their knowledge of the 2GIG Edge and the Honeywell Home PROA7PLUS. Summer's almost over but wade in, the water's fine.

Honeywell Home PROA7PLUS: Resolve WIFI Connection Issues

In this video, Michael discusses the various reasons why the Honeywell Home PROA7PLUS might not connect to WIFI. Reasons can include range, environmental issues, and even bad equipment. In addition, there is a specific setting to watch out for on Ubiquiti Access Points. Having this setting enabled can prevent your Honeywell Home PROA7PLUS from connecting to WIFI.

2GIG Edge: What To Expect During AC Loss

During an AC Loss condition, the 2GIG Edge will go into power conservation mode. After a few seconds, the touchscreen will go dark and only illuminate when something occurs that needs to be displayed, or when a user touches the touchscreen. Jorge tells and shows users what to expect as normal behavior when an AC Loss condition occurs.

2GIG Edge: Powering Down Properly

Believe it or not, there is a right way to properly power down an alarm system. In this video Jorge will show you how to properly power down a 2GIG Edge alarm panel. Begin by removing the set screws, pulling the panel off its base then unplugging the battery. Next, unplug the transformer, either at the barrel connector on the panel side, or by unplugging the transformer from the wall. If you can't find the transformer, you can power down by turning power off at the breaker.

Qolsys IQ Remote: Behavior On a Partitioned System

In this video Michael shows you how the Qolsys IQ Remote behaves when it is used on a partitioned system. The IQ Remote will only display the status of the partition to which it is assigned. It will only allow the user to control the assigned partition as well, and only a user with a User Code that has been given access to the assigned partition will be able to interact with the system from the IQ Remote.

2GIG GC3e: Installing the XCVR3 GC3

Michael shows users how to install the 2GIG XCVR3-GC3 to the 2GIG GC3e panel. Unlike with the 2GIG GC2 panel, the installation of the 2GIG XCVR3-GC3 does not require that anything be removed from the GC3e panel first. This transceiver module simply adds 900 MHz 2-way communication capability between the GC3e and the 2GIG TS1 as well as the 2GIG Image Sensors.

Honeywell Home PROA7PLUS: Installing PROTAKEOVER

Michael shows users how to set the dial for legacy RF devices, and then properly install the Honeywell Home PROTAKEOVER module into a PROA7PLUS system. This module allows the PROA7PLUS to support one (1) of five (5) legacy RF frequencies. This allows the panel to support previously existing sensors from Honeywell or 2GIG 345 MHz sensors, existing Qolsys and/or Interlogix/GE 319.5 MHz sensors, DSC 433 MHz sensors, or Bosch 433 MHz sensors. This module allows a user to replace an older panel with the newer PROA7PLUS without having to replace all the existing wireless sensors that are still working.

Alarm.com announces new features and device support each week in its Release Notes. Today's post will discuss what we feel are the best of those features for the week of August 2, 2021 with a bit of detail about each one. These are the new features as well as improvements posted this week.

Smart Water Valve+Meter

With a new Usage Graph, customers who use the Smart Water Valve+Meter in conjunction with Alarm.com can track their water usage and see trends in their water consumption. Users on the iOS platform will have access to an interactive water usage bar graph and will have 12 months of usage data that they can review. This will show any water leak reports, and on which days they occurred. The Android version of the app is more limited. Users can view up to 30 days worth of past water consumption. Alarm.com app version 4.20 is required for Android and app version 4.19.4 is required for iOS. These firmware updates should be available soon. From the app Home Screen, click on the Water Card to access usage information.

Below is an example of what the Water Card shows on the Customer Alarm.com App as of the current version:

New Z-Wave Lock Support

Support for Baldwin Model 8252 and 8285 Z-Wave locks has been confirmed by Alarm.com. We will be adding them to our site soon. Baldwin locks are manufactured by Kwikset, and Kwikset locks are known for being easily joined to a Z-Wave controller, and operating without a lot of fuss. These locks will support up to 30 door lock users each. Z-Wave door locks add great convenience when used with Alarm.com and the security panel. Doors can be locked and unlocked remotely, and locks can be used with scenes to automate locking and unlocking automatically based on a schedule, or on other security system events. For example, you can set the doors to automatically lock at a certain time each day. In the event of a fire alarm, doors could be unlocked automatically to allow firefighters to enter, etc.

New Z-Wave Switch Support

Support for the Schneider Electric Z-Wave On/Off Switch (SQ14102WHZ) has been announced. This is an in-wall switch with the latest Z-Wave plus technology, including S2 Security, and support for SmartStart. Schneider is an established electrical supply manufacturer trusted by builders and is commonly used in new construction. If you're building a home, consider putting in Z-Wave compatible smart switches from the start!

Updated SVR and Onboard 24/7 Timelines

Alarm.com has added events to the SVR Timeline and the Onboard 24/7 Timeline. These added events include Door Accessed and Failed Access events as well as Smarter Business Temperature Monitoring and Business Activity Analytics events. These added events are meant to keep customers better informed of their system usage, as well as their energy usage, and security related events in general. From the Customer Website go to Video > SVR Timeline or Customer Website to Video > Onboard 24/7 Timeline.

ADC-VDB770 Doorbell Camera Update

An option for High Dynamic Range (HDR) has been added on the Partner Portal Camera Information page pertaining to the ADC-VDB770. There is now a checkbox to enable or disable HDR on a customer's doorbell. In addition, this feature will now be disabled by default for new ADC-VDB770 installations. This feature can only be enabled or disabled by the alarm dealer, this option is not accessible through the end-user webpage or app.

Camera Selector Update

Video subscribers are now able to choose individual cameras or camera groups that they want to view. This is done from the Customer Website in the Live Video and SVR Timeline pages. This will allow customers as well as installers to more easily add or modify camera groups, improving video device management.

Those are the updates for this week. What do you think? Drop a comment below and let us know. It's nice to see that Alarm.com continues to find innovative ways in which they can make their users lives a little bit easier. Have an interesting idea for a post? Let us know what security industry topics you'd like to see us cover and we'll do our best to accommodate your requests.

The Z-Wave Alliance was created in 2005. Put together by a group of home automation product manufacturers, the alliance sought to standardize technology and manufacturing practices to create competitive products but with a certain amount of uniformity. Separate, but relatively equal.

Think of it like a Big Mac. If you buy a Big Mac at a McDonald's Restaurant in Montana, and I buy a Big Mac at a McDonald's Restaurant in Kentucky they will basically be the same. Reliably the same. The people who made my Big Mac and those that made your Big Mac have probably never met, the money paid for these sandwiches went to different places, the price paid may differ, but because a Big Mac follows a standard assembly and preparation if I pull up to a McDonald's anywhere in the USA I can reliably expect that when I order a Big Mac I know what I'm going to get.

In May 2005 Z-Wave (300-Series) was released and soon became widespread. In March, 2013 Z-Wave Plus (500-Series) was introduced, offering better range between hops, better power management, which translates to longer battery life, and more memory which translates into more features like the ability to add S2 128-bit encryption. In April, 2019 the Z-Wave Alliance began promoting enhanced certification for Z-Wave Plus V2, with the 700-Series Chipset. They continue to improve upon the original standard, so Z-Wave Plus V2 will offer even more of the things that made Z-Wave Plus popular. Greater wireless range, longer battery life, and where Z-Wave Plus supported S2 security 128-bit encryption, Z-Wave Plus V2 mandates it. And every time there is an advance in the technology, equipment with the new version is backward compatible with equipment on the older version, albeit with the older versions feature limitations.

Check out the chart below for a comparison between the three (3) current iterations of Z-Wave Technology. Z-Wave Long Range is on the horizon, but I chose to leave it out of this comparison chart. We'll have more information about the newest Z-Wave offering at a later time:

Z-Wave Technology Comparison

I know that Z-Wave is a really cool, easy, and inexpensive way to automate things in a home or business, but I didn't get a sense of just how impressive it is until I was putting together this chart. It's really very cool! There were a few features mentioned in the chart that I wasn't particularly familiar with, so I'm going to define those a little further below:

FLiRS (Beaming wake-up) - This feature has to do with Z-Wave devices that use battery power only, like all door locks, and some thermostats. FLiRS stands for Frequently Listening Receiver Slave (Not Forward Looking Infra-Red, like I thought). Basically, a battery powered Z-Wave device alternates between sleep mode and partially-awake mode. When it is partially-awake it is listening for a beam signal. If a Z-Wave controller (or another Z-Wave device, if the signal has to hop) has network traffic for the battery-powered device, it sends a beam. When the device partially wakes and hears the beam, it wakes immediately and communicates with the device that sent it. If the device partially wakes up and there's no beam signal, then it goes fully back to sleep. This can happen from once per second, to four (4) times per second, depending on how the device was manufactured. If not for FLiRS, Z-Wave door locks would probably not exist due to issues with battery life.

Explorer Frames - Explorer frames have to do with the way information is routed. When a new Z-Wave Plus device is being included to the network, it sends out a whole bunch of explorer frames. When an existing device sees an explorer frame, it resends it with its own Node ID added to the original information. At some point, some of these explorer frames reach the Z-Wave controller. When the controller receives them, it can see exactly which nodes on the network the explorer frames touched. This information is then used to route future traffic for the new device. As network devices are used, this routing information will likely change, but this is a basic explanation of what Explorer Frames do.

Network Wide Inclusion - Network Wide Inclusion (NWI) allows a device to be added to the network even if it's not within range of the Z-Wave controller itself. It makes use of Explorer Frames to do this. Before NWI and Explorer Frames, you often had to include a new device right next to the controller, then carry it to the location where you actually wanted it to be installed, and then cross your fingers and hope that it would work. If it didn't then you likely added another Z-Wave device somewhere between it and the Controller. With NWI, if your network is robust enough, you should not have to do that. It's always a good idea when laying out your network to start with devices closest to the controller, add those to the network, and then work your way out from there. As you can see from the chart above, NWI and Explorer Frames were added in Z-Wave Plus with the 500 Chipset, so any original Z-Wave devices won't support this type of inclusion.

What do you think of the evolution of Z-Wave? Are you ready to buy some devices and start automating? Let us know your thoughts in the comments below. We look forward to discussing this and any other security and automation topics you might like to add. Is there something you'd like to see us cover in our blog? If so, let us know in the comments and we'll do our best to bring you the information you're looking for.

It seems every week we're reporting a new feature being rolled out by Alarm.com. They recently added remote Duress Code programming through the Alarm.com app or website. Alarm.com must first enable this feature for the dealer, then users will have access if their panel supports the feature.

Before any Alarm.com user can start configuring codes remotely, the alarm dealer for the customer account must have this feature enabled. If the feature is not showing up when a user attempts to remotely program the Duress Code, contact the Alarm.com dealer and ask them to enable it. They may need to contact their Alarm.com Sales Representative to get the feature enabled.

Next, be sure that the alarm panel being used supports this feature. We have an FAQ on how to set up this feature via the Alarm.com Website and another FAQ on how to set up this feature using the Alarm.com App. Both of these FAQs have a list of compatible panels, and advise if a single or multiple codes are supported by the panel.

The way a Duress Code works is simple. If a system user is forced to interact with their alarm panel in any way, though this will usually involve disarming the system, if the Duress Code is used, then in addition to performing the security system function a silent signal is sent to the monitoring station alerting them to the fact that the system user is under duress. They are being forced to do something against their will. The monitoring station will receive this signal and then process it according to the customer's pre-stated wishes, and their own policies regarding duress situations.

The key element to the use of a Duress Code is the ability for someone who is not onsite to receive the signal and immediately take action. If the security system is not monitored by a trained 24/7 monitoring station employee then the Duress Code might just as well not exist. It may be possible to send a text, email, or push notification to someone outside the home or business, but there's a good chance that person may never see it, or may not understand what they're seeing. If there is any concern that a duress situation might occur, then central station monitoring is the best way to protect the people you love.

And finally, one thing I nearly forgot to mention above, an Alarm.com dealer cannot program a Duress User for a customer through their panel programming portal. Only the Admin Alarm.com Account user, the homeowner or business owner, is allowed to affect these codes remotely. So, what do you think about this new feature? Do you like the idea of being able to control system Duress Codes remotely? Leave a comment below and let us know your thoughts. We always enjoy hearing from our readers. That's all for now, stay safe out there.

Qolsys released the Qolsys IQ WIFI last week. The IQ WIFI supports dual-band (2.4GHZ and 5GHz) WIFI and can be used as a stand-alone router. It can also be installed in parallel with an existing network. This provides a separate secure WIFI connection for security devices such as cameras.

WIFI is about as common these days as home phones with a traditional copper line (POTS or Plain Old Telephone Service) were from the 1960's through the early 2000's. However, the adoption of WIFI networking has seen some challenges that were not really an issue when using POTS. Namely, the end-user installation and configuration aspect of WIFI networks, as well as issues with getting, and then staying, connected to them. The security industry has embraced WIFI in a big way in recent years, therefore security system users have felt the pain created by these challenges.

For this reason, Qolsys has introduced the Qolsys IQ WIFI. The IQ WIFI is a mesh-capable controller and agent system. Up to eight (8) devices can be supported per network. One IQ WIFI will connect to the modem, router, or switch via a wired ethernet cable. This IQ WIFI will become the controller for the mesh network. Then, up to seven (7) additional IQ WIFI units acting as Agents can be added for a total of eight (8) devices. This allows a user to blanket virtually every nook and cranny of the home or business with a safe and easily configured WIFI connection. If you have a Qolsys IQ Panel 2 or IQ Panel 2 Plus with firmware version 2.6.0 or later, the network can be configured right from the panel's touchscreen. The range between IQ WIFIs is approximately 130 ft. (39.62 m) with a coverage area of approximately 1,500 square feet (139 square meters). Wireless IEEE 802.11 b/g/n 2.4GHz and IEEE 802.11 a/n/ac 5GHz frequencies are supported.

The Qolsys IQ WIFI can be used as a stand-alone router. Each one contains a WAN port, a LAN port, and a barrel connector for power. Each one also has a WPS button. If your ISP provides you with a combination Modem/Router device, connect the WAN port of the IQ WIFI to one of the available ethernet ports on the Modem/Router. From there you can use the IQ WIFI as a wired or WIFI router. For wired devices, connect directly to the LAN port on the IQ WIFI. If you have more than one wired device to connect, connect a multi-port switch to the IQ WIFI LAN port, and then connect your other wired ethernet devices to the switch. As an alternative, connect the WAN port on the IQ WIFI to an existing router or switch, and then using this device as the Controller, build a parallel WIFI mesh network(s) out from there.

Up to seven (7) additional IQ WIFI devices can be added as Agents to create a mesh network that is as strong as you need it to be. This allows you to run a separate WIFI network inside your home or business that is virtually invisible to anyone attempting to hack in from the outside. Another attractive feature of this type of configuration is the ease of replacing the Internet facing hardware. Any time you need to swap out the main modem or router, all you do is swap out the existing hardware, then connect the Qolsys IQ WIFI acting as the Controller to the new piece of equipment. All of the WIFI devices that have been configured to connect through the IQ WIFI will keep their current configuration. There is no need to go around to each WIFI device and enter new credentials. This is particularly welcome when you have WIFI equipment, such as fixed-mount cameras, that may be installed in multiple and difficult to reach locations.

In many cases, security devices can only use the 2.4GHz WIFI band. When the SSID for both 2.4GHz and 5GHz are the same, this can cause issues for those devices that don't support both frequencies. We've seen this in many instances with the Honeywell Lyric. By allowing the user to separate the two bands, achieved by changing the SSID on one or both of them, you can make sure that any device that needs to use only one band or the other can find and then remain connected to the proper WIFI network. It may seem counter-intuitive to think that a Qolsys product could help to stabilize the WIFI connection for a Resideo or Honeywell alarm system, but it is absolutely possible.

When Qolsys first talked about this device, they called it the Qolsys IQ Router. Since then, they have updated the name to Qolsys IQ WIFI and they plan to release a separate device called the Qolsys IQ Router2, or possibly the IQ WIFI6 later in the year. This will be a more robust device supporting both WIFI and potentially another technology such as Z-Wave, Zigbee, or maybe even PowerG. We look forward to hearing about many more new products to come! What do you think of the Qolsys IQ WIFI? Leave a comment below. We'd love to hear from you.

The police department in Sandy Springs, GA is one of several that adhere to a policy of Verified Response when it comes to burglar alarms. They require proof that a crime has occurred before they will respond. Proof can come in one of several forms, which we will be discussing here.

Different police jurisdictions define verified response in different ways with different verification criteria. In some jurisdictions, a second burglar alarm activation on a different zone within the same address occurring within a certain period of time qualifies as verification. For others, there must be audio, video, or onsite verification before the police will respond. In Sandy Springs, GA, the latter type of verification is required. The full Alarm Dispatch Guidelines for Sandy Springs, GA can be found here.

This is not to say that the City of Sandy Springs or any other police department that otherwise requires verification won't respond to any type of alarm without proof of an issue at the site. For most jurisdictions, if there is a Panic, Duress, Hold-up, Medical, CO, Elevator or Fire alarm, the requirement for verification is waived and immediate dispatch can be requested. But, at least in the case of Sandy Springs, if authorities respond and there is no evidence of criminal activity or any other emergency, then false alarm fees will apply.

Furthermore, if a monitoring station employee requests public safety dispatch on an alarm based on audio or video proof that a crime is occurring or has occurred, then Sandy Springs requires that they submit proof of verification within 24 Hours of the dispatch request. Failure to do so will incur additional fines! Proof can either be described to the monitoring station employee by the end-user after checking their cameras or other means of verification, or it can come from the monitoring station employee themselves having reviewed audio or video evidence. The burden of proof has been placed squarely on the monitoring company.

If a customer has an alarm system that uses Audio Alarm Verification, sometimes referred to as 2-Way Voice, then the monitoring station can use this to verify if an unauthorized individual is onsite. In the case of Sandy Springs, silence does not count as proof of an issue, the monitoring station dispatcher must hear footsteps, talking, sounds of rummaging, or other proof of an issue at the site. If the customer has video surveillance, either the customer, or in some cases the monitoring station, can use the video system to verify if an alarm is an actual break-in. The customer may even have a friendly neighbor who is willing to receive a notification from the alarm monitoring company and will go and check things out for them and report back.

However, not every monitoring company will support 2-Way Voice. Currently at Alarm Grid, we don't support this option. And not every customer wants to blanket their property with security cameras. Some properties are too large, or too far away from neighbors to make relying on a neighbor a viable option. In these cases, the best option may be to employ a guard service.

In the past few years, Alarm Grid has partnered with a company called Vet Sec to provide an onsite guard response to monitored locations in jurisdictions such as Sandy Springs. Vet Sec employs guards, in most cases these guards are unarmed or they may be armed with non-lethal weapons (tasers). Once an alarm occurs, the monitoring station will contact Vet Sec, rather than the local police department. A single guard will respond and check the location for signs of a break-in or any other criminal activity, such as vandalism. If evidence of a crime is found, they will notify the monitoring station and wait up to 30 minutes for a key holder and the authorities to arrive. In exchange, they charge a fee for this site visit. The price may vary by location. In most cases, the police should respond within 30 minutes, but if it takes longer for them to arrive, and the customer or other key holder wants the guard to wait with them, then additional fees may apply.

There are several great things about this service. For one, just like with Alarm Grid monitoring, there is no contract so a customer can cancel at any time. Also, this is a "pay as you go" service, so a customer is only billed if a guard actually responds to their monitored location. The fees are billed to Alarm Grid and are then applied to the customer's monthly monitoring fee on the next automatic bill date. Alarm Grid does not markup this fee, we simply pass the fee along to the customer. What we pay, you pay.

Areas in the United States where Verified Response is Required:

Please keep in mind that this list is something that may evolve with little notice. It may be difficult to keep the list 100% accurate, but we will do our best. There have actually been a few places where the police department tried using verified response, and then changed their mind due to increases in property crime. San Jose, CA is one that comes to mind. It was reported in 2019 that they had decided to change their policy and move away from requiring verified response.

You may have noticed that the list above didn't feature any locations from our neighbor to the north. There are a couple of places in Canada that require a version of verified response. Winnipeg, Manitoba, and London and Toronto, Ontario have all adopted a more lax definition of this type of verification. In all three of these locations, the police department will accept two or more activations of two or more separate burglary zones as a form of verification. Currently, Alarm Grid does not offer a guard service in any of the Canadian provinces. If this changes, we'll be sure to update this blog post.

So, of course the burning question is, "How much does it cost?" For most locations the charge is $45 per site visit. There are a few locations where the price differs. In Sandy Springs, GA, the price is $68 per site visit. In Albuquerque, NM customers currently pay $57.07 per visit, and in Eugene, OR the price is $60 per site visit.

What do you think of the Verified Response Policy recently implemented in Sandy Springs, GA? Is it overdue, or overreach? Tell us what you think in the comments below. We'd love to hear from you. Stay tuned to our blog for more exciting security industry news. If you need help figuring out what system you have in the house you just moved into, or you're looking to upgrade an existing system, or to install one for the first time, reach out to us via email at support@alarmgrid.com. We're here Monday - Friday from 9 am to 8 pm Eastern. We look forward to hearing from you!

The year 2020 was about as tough as a well-done $2 steak. I hope never to have another one like it. On the other hand, 2021 is shaping up to end on a high note. One of the high points begins today. After skipping last year, Reed Exhibitions will hold ISC West live this year in Las Vegas.

In years past ISC West, the largest trade show associated with the safety and security industry, has been held in the spring. Due to COVID-19, the 2020 show was postponed in March, then postponed again in April, canceled in June, and ultimately held as a virtual-only event in October. We began 2021 with the show being postponed from the traditional spring dates, to July 19 - 21. There was also a comprehensive list of Health and Safety guidelines that those who will attend in-person are expected to follow. This year's show is being billed as a "hybrid" exhibit, with both in-person booths, and virtual events.

Finally, the time has come for the show to begin. Alarm Grid has opted to participate in the virtual-only portion of the show this year. We've reached out to our most popular vendors, and hope to be presenting exciting information on upcoming new products. So far, what to expect from the virtual show has remained pretty well hidden. Whatever we learn in the next few days about upcoming releases and new products, we will share here on our blog, and on our Youtube channel.

How about you, are you planning to attend ISC West this year? If you aren't going to the show, but wish you were, what burning questions would you ask? Personally, I'd like to get the inside scoop on chip shortages this year, and when we may be able to expect the shortages to ease. Qolsys, 2GIG, and Resideo (Honeywell) have all released new products in the recent past, do they have anything else new up their sleeves? We'll be looking for this information, and whatever we learn, we'll pass it along. Stay tuned!

Qolsys recently released a service bulletin describing an issue with certain IQ Hardwire 16-F units. This issue affects both the small enclosure and large enclosure versions. Under certain circumstances, affected units can signal a false tamper/tamper restore message for connected zones.

Qolsys TSB #210708, which was released on July 8, 2021, describes this issue, and the corrective action Qolsys is taking to remedy the problem. They do not provide a lot of information regarding what "conditions" bring about this behavior. We have asked for more detail, and if more information is forthcoming, we will provide updates here in our blog.

Rest assured that only a certain number of these devices are affected, and we will provide users with the necessary information to determine if they have one of these units. Qolsys IQ Hardwire 16-F units that were manufactured outside of the window in question are not affected and should not exhibit this behavior.

How to determine if your Qolsys IQ Hardwire 16-F small enclosure (SKU: QS7133-840) is affected:

On the unit itself, or on the box that the unit came in, check the Revision Sticker. This will appear as a bar code on the sticker and will be marked with SN: and DL: If the 4th character of the SN, moving from left to right, is a "C" then the Qolsys IQ Hardwire 16-F small enclosure should be returned/replaced. This sticker may be found on the rear of the unit and may require that you dismount the unit from the wall to get access it.

How to determine if your Qolsys IQ Hardwire 16-F large enclosure (SKU: QS7134-840) is affected:

On the Qolsys IQ Hardwire 16-F large enclosure, the way you determine the revision is the same, but the revision information is different. On these units the revision to be on the lookout for is "B" rather than "C". This sticker should also appear on the unit itself as well as on the box that the unit comes in. Since these devices come from the factory with an enclosure, the sticker may be on the enclosure rather than the printed circuit board. Unfortunately, it may also be on the back of the enclosure, requiring that it be removed from the wall to be accessed. When reading the sticker, the 4th character when viewing the SN from left to right is "B" on affected units. See the example below:

Qolsys has pulled back available affected stock to correct this issue. Units that may have been affected, but have since been pulled back into manufacturing and reworked or replaced, will sport a sticker that says "TEST OK".

If you purchase a Qolsys IQ Hardwire 16-F that falls within the Revision range discussed above, but the item has a "TEST OK" sticker affixed somewhere on the packaging or the unit itself, then you do not have to worry about this issue. If you purchased a Qolsys IQ Hardwire 16-F prior to the date that this notice was released, and your device falls within the revision range discussed above, then you should contact your distributor to discuss replacing the unit. Per Qolsys, you should do this even if you haven't observed the behavior described in this Technical Service Bulletin.

If you are an Alarm Grid customer, and you purchased an affected unit from Alarm Grid, you can contact us at support@alarmgrid.com. We are here Monday - Friday from 9am to 8pm ET. If you prefer to speak to us by phone, you can reach us at 888-818-7728. It is our pleasure to assist you with any and all of your alarm needs. Stay safe!