Wireless Alarm Control Panels Posts

In preparation for the upcoming 2GIG Edge Security System, Alarm Grid has finished building the product pages for both the AT&T LTE and Verizon LTE versions of the 2GIG Edge Alarm Panel. We now have more information than ever on what looks to be a truly state-of-the-art alarm system.

• Check out the 2GIG Edge w/ AT&T LTE here SKU: 2GIG-EDG-NA-AA.
• Check out the 2GIG Edge w/ Verizon LTE here SKU 2GIG-EDG-NA-VA.

If you check the two product pages linked above, you will see that the 2GIG Edge is currently marked "discontinued". It will stay that way on our site until we have it available for purchase. But at least now, you can check out the page and see all of its great specifications and capabilities. Needless to say, it has a ton to offer. You could say that we're on the edge of our seats waiting.

We would like to take a moment and discuss some of the more noteworthy specs of the 2GIG Edge. Just like its 2GIG GC3e predecessor, the 2GIG Edge supports the same sensor lineups, included the encrypted 2GIG eSeries Sensors, the 2GIG 345 MHz Sensors, and the Honeywell 5800 Sensors. It also supports up to 100 zones, which is the same as the GC3e. There is a possibility that 2GIG might release a new sensor lineup of devices built exclusively for use with the Edge, but we have not seen any confirmation one way or another.

A very interesting discovery about the 2GIG Edge is that its internal LTE cellular communicator cannot be replaced, much like what we have already seen with the Qolsys IQ Panel 2 Plus. For us, this is a mixed bag, or a double-edged sword, if you will. On one hand, this means that you don't have to buy a communicator separately, and you will not have to install one inside the panel. But unfortunately, this means that you must replace the entire panel in the event that something goes wrong with the communicator. It also means that we may someday see all the 2GIG Edge Systems go offline at the same time due to a possible "LTE Sunset" that may happen someday in the future. That said, such an LTE Sunset wouldn't happen for a very long time.

Other features for the 2GIG Edge include its built-in WIFI, and its integrated Z-Wave Plus V2 700-Series Z-Wave Controller. That's right, this is the first system we know of to support Z-Wave 700-Series. That in itself is really exciting, as we expect this panel to be an unquestioned champ when it comes to automation. Alarm.com connectivity has also returned with the Edge, and you get all of the benefits of that platform once you get the system monitored with a proper service plan. This includes the ability to interface with smart home voice assistants like Google Assistant, Amazon Alexa, Amazon Echo, Siri Shortcuts, and so much more!

We won't go too in-depth on every new feature right now, but you can expect facial recognition, optional automatic Bluetooth disarming, Alarm.com Camera streaming, one-touch arming, emergency panic buttons, disarm photos, over-the-air (OTA) firmware updates, and so much more to be available with the 2GIG Edge. This is truly a great system to look forward to, and we hope that waiting doesn't push you over the edge of insanity.

We have some other 2GIG Edge accessories you can check out on our site right now, though none are currently available for purchase. We will be expanding upon these product pages as we learn more. These include:

• 2GIG Edge Cable w/ AC1 Barrel Connection - SKU: 2GIG-EDG-CBL
• 2GIG Edge Backup Battery - SKU: 2GIG-EDG-BATT
• 2GIG Edge Remote Keypad - SKU: 2GIG-EDG-RK
• 2GIG Edge Remote Keypad Battery - SKU: 2GIG-EDG-RK-BATT

Please comment below with any thoughts or questions you have about the 2GIG Edge. Are you excited about this system? Let us know. And stay tuned to our blog for more security news and updates coming real soon!

In preparation for the upcoming 2GIG Edge Security System, Alarm Grid has finished building the product pages for both the AT&T LTE and Verizon LTE versions of the 2GIG Edge Alarm Panel. We now have more information than ever on what looks to be a truly state-of-the-art alarm system.

• Check out the 2GIG Edge w/ AT&T LTE here SKU: 2GIG-EDG-NA-AA.
• Check out the 2GIG Edge w/ Verizon LTE here SKU 2GIG-EDG-NA-VA.

If you check the two product pages linked above, you will see that the 2GIG Edge is currently marked "discontinued". It will stay that way on our site until we have it available for purchase. But at least now, you can check out the page and see all of its great specifications and capabilities. Needless to say, it has a ton to offer. You could say that we're on the edge of our seats waiting.

We would like to take a moment and discuss some of the more noteworthy specs of the 2GIG Edge. Just like its 2GIG GC3e predecessor, the 2GIG Edge supports the same sensor lineups, included the encrypted 2GIG eSeries Sensors, the 2GIG 345 MHz Sensors, and the Honeywell 5800 Sensors. It also supports up to 100 zones, which is the same as the GC3e. There is a possibility that 2GIG might release a new sensor lineup of devices built exclusively for use with the Edge, but we have not seen any confirmation one way or another.

A very interesting discovery about the 2GIG Edge is that its internal LTE cellular communicator cannot be replaced, much like what we have already seen with the Qolsys IQ Panel 2 Plus. For us, this is a mixed bag, or a double-edged sword, if you will. On one hand, this means that you don't have to buy a communicator separately, and you will not have to install one inside the panel. But unfortunately, this means that you must replace the entire panel in the event that something goes wrong with the communicator. It also means that we may someday see all the 2GIG Edge Systems go offline at the same time due to a possible "LTE Sunset" that may happen someday in the future. That said, such an LTE Sunset wouldn't happen for a very long time.

Other features for the 2GIG Edge include its built-in WIFI, and its integrated Z-Wave Plus V2 700-Series Z-Wave Controller. That's right, this is the first system we know of to support Z-Wave 700-Series. That in itself is really exciting, as we expect this panel to be an unquestioned champ when it comes to automation. Alarm.com connectivity has also returned with the Edge, and you get all of the benefits of that platform once you get the system monitored with a proper service plan. This includes the ability to interface with smart home voice assistants like Google Assistant, Amazon Alexa, Amazon Echo, Siri Shortcuts, and so much more!

We won't go too in-depth on every new feature right now, but you can expect facial recognition, optional automatic Bluetooth disarming, Alarm.com Camera streaming, one-touch arming, emergency panic buttons, disarm photos, over-the-air (OTA) firmware updates, and so much more to be available with the 2GIG Edge. This is truly a great system to look forward to, and we hope that waiting doesn't push you over the edge of insanity.

We have some other 2GIG Edge accessories you can check out on our site right now, though none are currently available for purchase. We will be expanding upon these product pages as we learn more. These include:

• 2GIG Edge Cable w/ AC1 Barrel Connection - SKU: 2GIG-EDG-CBL
• 2GIG Edge Backup Battery - SKU: 2GIG-EDG-BATT
• 2GIG Edge Remote Keypad - SKU: 2GIG-EDG-RK
• 2GIG Edge Remote Keypad Battery - SKU: 2GIG-EDG-RK-BATT

Please comment below with any thoughts or questions you have about the 2GIG Edge. Are you excited about this system? Let us know. And stay tuned to our blog for more security news and updates coming real soon!

We are happy to announce that the Honeywell Home PROA7 and the Resideo PROA7C are now available. You can consider these as entry level versions of the Honeywell Home PROA7PLUS and the Resideo PROA7PLUSC.

The best way to think of the PROA7 and PROA7C is that they are the PROA7PLUS without a Honeywell Home PROWIFIZW, no Bluetooth capabilities, and no front panel camera. It's the same as the PROA7PLUS, just with no WIFI, no Z-Wave, no optional automatic Bluetooth disarming, and no disarm photos. You can always add the PROWIFIZW Module later on to add WIFI and Z-Wave Plus, but Bluetooth and the front camera can never be added. Basically, you will always be working with a lesser version of the PROA7PLUS.

If you want to get a PROA7 or PROA7C monitored, then you will need to add a PROWIFIZW Module and/or one of the compatible LTE cellular communicators, which are the Honeywell Home PROLTE-A AT&T LTE Communicator and the Honeywell Home PROLTE-V Verizon LTE Communicator. Getting the system monitored will also allow you to use Total Connect 2.0 to control the system remotely, provided that access to the service is included with your monitoring plan.

Remember that since the ProSeries System does not yet support local end-user programming, you will not be able to enroll any sensors with the PROA7 or PROA7C until you get it monitored. The Honeywell Home PROSIX and Honeywell SiX Series Sensors return as compatible encrypted peripherals for the systems, and you can also add a Honeywell Home PROTAKEOVER Module for legacy RF sensor support.

Any one of several older manufacturer's sensors can be used with the PROTAKEOVER Module. These include Honeywell 5800 series, 2GIG 345 MHz (non-encrypted), Qolsys/Interlogix 319.5 MHz, DSC, and Bosch which both use a variation of 433 MHz. Up to 250 zones in total can be used with the PROA7 or PROA7C.

As you may have guessed, the only difference between the Honeywell Home PROA7 and the Resideo PROA7C is that the PROA7 says "Honeywell Home" across its front, while the PROA7C says "Resideo" across its front. Other than that, they really are the same panel. Which one do you like more? Let us know in the comments down below. And remember to reach out to us with any questions you might have. As always, we look forward to hearing from you!

We are happy to announce that the Honeywell Home PROA7 and the Resideo PROA7C are now available. You can consider these as entry level versions of the Honeywell Home PROA7PLUS and the Resideo PROA7PLUSC.

The best way to think of the PROA7 and PROA7C is that they are the PROA7PLUS without a Honeywell Home PROWIFIZW, no Bluetooth capabilities, and no front panel camera. It's the same as the PROA7PLUS, just with no WIFI, no Z-Wave, no optional automatic Bluetooth disarming, and no disarm photos. You can always add the PROWIFIZW Module later on to add WIFI and Z-Wave Plus, but Bluetooth and the front camera can never be added. Basically, you will always be working with a lesser version of the PROA7PLUS.

If you want to get a PROA7 or PROA7C monitored, then you will need to add a PROWIFIZW Module and/or one of the compatible LTE cellular communicators, which are the Honeywell Home PROLTE-A AT&T LTE Communicator and the Honeywell Home PROLTE-V Verizon LTE Communicator. Getting the system monitored will also allow you to use Total Connect 2.0 to control the system remotely, provided that access to the service is included with your monitoring plan.

Remember that since the ProSeries System does not yet support local end-user programming, you will not be able to enroll any sensors with the PROA7 or PROA7C until you get it monitored. The Honeywell Home PROSIX and Honeywell SiX Series Sensors return as compatible encrypted peripherals for the systems, and you can also add a Honeywell Home PROTAKEOVER Module for legacy RF sensor support.

Any one of several older manufacturer's sensors can be used with the PROTAKEOVER Module. These include Honeywell 5800 series, 2GIG 345 MHz (non-encrypted), Qolsys/Interlogix 319.5 MHz, DSC, and Bosch which both use a variation of 433 MHz. Up to 250 zones in total can be used with the PROA7 or PROA7C.

As you may have guessed, the only difference between the Honeywell Home PROA7 and the Resideo PROA7C is that the PROA7 says "Honeywell Home" across its front, while the PROA7C says "Resideo" across its front. Other than that, they really are the same panel. Which one do you like more? Let us know in the comments down below. And remember to reach out to us with any questions you might have. As always, we look forward to hearing from you!

We know that 2020 has been a crazy year for all. And now we're right in the thick of the holiday buying season. We wanted to take a brief moment to collect our thoughts and make things a bit more organized so you can decide which route to take for your security and automation shopping.

First of all, if you haven't checked out our 2020 holiday buying guides, then that's a great place to start! We put together five (5) guides this year.

• 2020 Alarm Panel Buying Guide - Find out which alarm panels are worth building around. Your alarm panel serves as the central hub for all your security and automation needs, and it represents your most important buying decision.
• 2020 Security Sensor Buying Guide - Protect your home or office with top-of-the-line security sensors. These devices alert your system whenever there is possible intrusion activity, such as a door being opened, or a window being broken.
• 2020 Environmental Sensor Buying Guide - Safety is the name of the game with environmental sensors. Unlock the true potential of your alarm system by monitoring for conditions like unusual temperatures, fires and flooding.
• 2020 Smart Home Automation Buying Guide - Your security system is also the center of your smart home! Make your life more convenient with devices like smart lights, door locks, and programmable thermostats.
• 2020 System Accessories Buying Guide - All the other goodies and gadgets that you need for your complete home or business security system! We cover cellular communicators, desk mounts, surveillance cameras, and more!

But before we close out this post, we want to stop and make some special notes. If you are still left wondering what to buy this holiday season, then we have two (2) recommendations. First, we've been stressing all year about the importance of upgrading to an LTE cellular communicator if you are still using an older 3G or CDMA module.

If you still have any doubts, then yes, now is the best time to upgrade. Older cellular modules are going to stop working. There is going to be a big rush for users to keep their systems connected at the very last minute. Make things easier on yourself (and us) by upgrading early. And if you're still running an IP-only panel, then getting started with cellular monitoring is a huge upgrade in itself. This is the best way to keep your system online in the event of an internet or power outage. That's our first recommendation - UPGRADE YOUR SYSTEM TO LTE IF YOU HAVEN'T ALREADY.

Second, we want to close out our holiday recommendations with a bang. We understand that getting a new communication path for your system might not be the most exciting thing in the world. But here's something that is. If you are looking for the single, sexiest, new product that we have the capacity to promote at this time, then we have your answer. Right here, right now. Alarm.com ADC-VDB770 Video Doorbell Camera.

We've been promoting doorbell cameras for quite a while now. But the ADC-VDB770 is different. We've never seen a doorbell camera output video at quite this level before. To see a doorbell camera with 1440x1920 resolution and High Dynamic Range is pretty insane. This nifty gadget outputs video nearly as well as what a state-of-the-art 4K TV can even display! And it backs up its talk further with its crazy 150° Field of View, astounding 15 foot night vision range, and its ability to utilize the full suite of Alarm.com Video Analytics features. This doorbell camera has taken what you would expect out of a top-of-the-line security camera and turned it into an ultra-convenient front-of-home monitoring device! Wow!

There are some drawbacks. One is that it's for Alarm.com only. Unfortunately, this means that TC2 users can't play with this fun new toy. Second, at this time, we can only support it on a Platinum Level Monitoring Plan. But we are exploring our options, and there may soon be a way that we can support a single ADC-VDB770 device on a non-video account, much like what we have been able to do with SkyBell Video Doorbell devices. It's too early for us to make any promises, but we hope to expand the reach of this doorbell camera so that more of the world may appreciate its glory. But if you want our second recommendation - ALL ALARM.COM USERS SHOULD GET THE ADC-VDB770 DOORBELL CAMERA.

For now, that concludes our post-buying guide holiday thoughts. Get on LTE! And if you're on ADC, then get that doorbell camera! You'll be thrilled that you did! And as always, don't hesitate to reach out to us with any questions. The best way to contact us is to email support@alarmgrid.com. Our team responds to emails from 9am to 8pm ET M-F. We look forward to hearing from you!

We know that 2020 has been a crazy year for all. And now we're right in the thick of the holiday buying season. We wanted to take a brief moment to collect our thoughts and make things a bit more organized so you can decide which route to take for your security and automation shopping.

First of all, if you haven't checked out our 2020 holiday buying guides, then that's a great place to start! We put together five (5) guides this year.

• 2020 Alarm Panel Buying Guide - Find out which alarm panels are worth building around. Your alarm panel serves as the central hub for all your security and automation needs, and it represents your most important buying decision.
• 2020 Security Sensor Buying Guide - Protect your home or office with top-of-the-line security sensors. These devices alert your system whenever there is possible intrusion activity, such as a door being opened, or a window being broken.
• 2020 Environmental Sensor Buying Guide - Safety is the name of the game with environmental sensors. Unlock the true potential of your alarm system by monitoring for conditions like unusual temperatures, fires and flooding.
• 2020 Smart Home Automation Buying Guide - Your security system is also the center of your smart home! Make your life more convenient with devices like smart lights, door locks, and programmable thermostats.
• 2020 System Accessories Buying Guide - All the other goodies and gadgets that you need for your complete home or business security system! We cover cellular communicators, desk mounts, surveillance cameras, and more!

But before we close out this post, we want to stop and make some special notes. If you are still left wondering what to buy this holiday season, then we have two (2) recommendations. First, we've been stressing all year about the importance of upgrading to an LTE cellular communicator if you are still using an older 3G or CDMA module.

If you still have any doubts, then yes, now is the best time to upgrade. Older cellular modules are going to stop working. There is going to be a big rush for users to keep their systems connected at the very last minute. Make things easier on yourself (and us) by upgrading early. And if you're still running an IP-only panel, then getting started with cellular monitoring is a huge upgrade in itself. This is the best way to keep your system online in the event of an internet or power outage. That's our first recommendation - UPGRADE YOUR SYSTEM TO LTE IF YOU HAVEN'T ALREADY.

Second, we want to close out our holiday recommendations with a bang. We understand that getting a new communication path for your system might not be the most exciting thing in the world. But here's something that is. If you are looking for the single, sexiest, new product that we have the capacity to promote at this time, then we have your answer. Right here, right now. Alarm.com ADC-VDB770 Video Doorbell Camera.

We've been promoting doorbell cameras for quite a while now. But the ADC-VDB770 is different. We've never seen a doorbell camera output video at quite this level before. To see a doorbell camera with 1440x1920 resolution and High Dynamic Range is pretty insane. This nifty gadget outputs video nearly as well as what a state-of-the-art 4K TV can even display! And it backs up its talk further with its crazy 150° Field of View, astounding 15 foot night vision range, and its ability to utilize the full suite of Alarm.com Video Analytics features. This doorbell camera has taken what you would expect out of a top-of-the-line security camera and turned it into an ultra-convenient front-of-home monitoring device! Wow!

There are some drawbacks. One is that it's for Alarm.com only. Unfortunately, this means that TC2 users can't play with this fun new toy. Second, at this time, we can only support it on a Platinum Level Monitoring Plan. But we are exploring our options, and there may soon be a way that we can support a single ADC-VDB770 device on a non-video account, much like what we have been able to do with SkyBell Video Doorbell devices. It's too early for us to make any promises, but we hope to expand the reach of this doorbell camera so that more of the world may appreciate its glory. But if you want our second recommendation - ALL ALARM.COM USERS SHOULD GET THE ADC-VDB770 DOORBELL CAMERA.

For now, that concludes our post-buying guide holiday thoughts. Get on LTE! And if you're on ADC, then get that doorbell camera! You'll be thrilled that you did! And as always, don't hesitate to reach out to us with any questions. The best way to contact us is to email support@alarmgrid.com. Our team responds to emails from 9am to 8pm ET M-F. We look forward to hearing from you!

Alarm Grid is proud to announce that the next generation Honeywell Home PROA7PLUS Security System is available for purchase on our site. Today, we're going to explore this new system and find out whether or not its worth buying. Let's take a deep dive into the Honeywell Home PROA7PLUS!

We will cut right to the chase. The Honeywell Home PROA7PLUS from Resideo has been available on our site for a couple of months now. However, we have been hesitant to promote it due to one glaring factor. The system lacks support for local end user programming. This means that the system can only be programmed and configured by your monitoring provider. You will need to contact Alarm Grid, or whomever you are using for monitoring service, whenever you want to make changes to the system programming settings. You won't be able to enter programming locally and conveniently make adjustments to the majority of system settings and configurations. This goes against our primary principle as a DIY monitoring provider, and it is such a big concern that we have been reluctant to announce it.

Now, the news isn't all bad. Other than its lack of local programming, the PROA7PLUS is a very nice alarm panel. it's sleek, crisp, and it looks great mounted on a wall. The system turns heads with its gorgeous 7-inch full-color display screen that offers easy and convenient touchscreen control. And it wouldn't be complete without the panel's powerful features, which we will certainly be discussing later in this post. Plus, we have received a promise from Resideo that local programming support for the PROA7PLUS will be made available in a future update, which is expected to be made available sometime in the first half of 2021. For now, you are certainly welcome to purchase the Honeywell Home PROA7PLUS from us, and we are happy to monitor the system and help you with setting it up and configuring it to your liking. But for the time being, it is not one of our top security system picks. If you want to learn more about some systems that we currently recommend purchasing instead of the PROA7PLUS, then please check out our 2020 Holiday Buying Guide for Alarm Panels, which includes the Honeywell Lyric, also from Resideo.

With that out of the way, we can begin focusing on the positive aspects of the Honeywell Home PROA7PLUS. And there really is a lot to discuss in that regard. The system supports up to 127 zones out of the box, and it can support up to 250 with the proper add-on, which we'll cover later. There are also 32 key fob slots. The main sensors you'll be using with the PROA7PLUS are the Honeywell Home PROSIX Series Sensors. These state-of-the art sensors are built exclusively for use with the PROA7PLUS. They utilize top-of-the-line 128-bit AES encryption, and they boast a wireless range of more then 300 nominal feet. You can also use the Honeywell SiX Series Sensors, which were originally built for use with the Lyric, with the PROA7PLUS. But be warned, once you pair an original SiX Series Sensor with a PROA7PLUS, it will receive an update and then you will never be able to use it with a Lyric System again.

For this buying guide, we'll primarily be focusing on the PROSIX Sensors built exclusively for the PROA7PLUS. Let's check out the PROSIX Series Sensors.

Model	Notes
Honeywell Home PROSIXCO	Carbon monoxide sensor. Emits 85 dB Temporal 4 sounder upon activation. Includes One-Go-All-Go functionality.
Honeywell Home PROSIXCOMBO	Combination smoke, heat, and carbon monoxide sensor. Includes built-in 85 dB sounder that emits Temporal 3 sound for smoke and heat, and Temporal 4 sound for CO. Includes One-Go-All-Go functionality.
Honeywell Home PROSIXCT	Door and window contact sensor. Magnet spacing gap of 0.75". Includes terminal block for single NC wired contact sensor. Has battery life of approximately five (5) years. Offers wireless range of 300+ feet. Measures 3.13"L x 1.61"W x 1.0"D.
Honeywell Home PROSIXFLOOD	Flood sensor. Sends alert to system within 15 seconds of detecting liquid. Comes with detachable Honeywell FP280 Probe that measures 15 feet in length.
Honeywell Home PROSIXFOB	Four-button key fob. Allows for dual-button inputs, for a maximum total of eight (8) inputs. Includes key ring for easy carry.
Honeywell Home PROSIXGB	Glass break detection sensor. Includes 25-foot detection range, and four (4) sensitivity settings. Honeywell FG701 is recommended glass break simulator.
Honeywell Home PROSIXMED	Single-button medical alert. Activation requires pressing and holding single button for three (3) full seconds. Only uses one (1) zone on system. Water-resistant. Includes accessory clip for device to be worn as wristband, lanyard, or belt clip.
Honeywell Home PROSIXMINI	Mini door and window sensor. Magnet spacing gap of 1.15" on wood, and 0.5" on metal. Has battery life of approximately five (5) years. Offers wireless range of 200+ feet. Measures. 2.44"L x 1.25"W x 0.45"D.
Honeywell Home PROSIXMINI2	Mini door and window sensor. Magnet spacing gap of 1.15". Has battery life of approximately seven (7) years. Offers wireless range of 500+ feet. Measures 2.9"L x 1.15"W x 0.75"D.
Honeywell Home PROSIXPANIC	Dual-button panic. Activation requires pressing and holding BOTH buttons for three (3) full seconds. Only uses one (1) zone on system. Water resistant. Includes accessory clip for device to be worn as wristband, lanyard, or belt clip.
Honeywell Home PROSIXPIR	PIR motion detection sensor. Has maximum detection area of 40 by 56 feet with 90° viewing angle. Supports pet immunity for small animals weighing up to 80 lbs.
Honeywell Home PROSIXSHOCK	Three-zone, all-in-one shock, contact, and transmitter sensor. Each function (service) can be turned ON or OFF as needed. Shock coverage area of about 10 to 12 square feet (5 to 6 foot radius). Four (4) sensitivity options for shock detection. Contact magnet spacing gap is 0.75" on wood surface. Wireless transmitter is for NC contact sensors only. Measures 3.13"L x 1.61"W x 1"D.
Honeywell Home PROSIXSMOKEV	Smoke and heat detector. Photoelectric smoke detection. Heat sensor activates at Fixed Temperature of 135°F, or Rate-of-Rise of 15°F in single minute when temperature is 104°F or higher. Emits 85 dB Temporal 3 sounder upon activation. Includes One-Go-All-Go functionality.
Honeywell Home PROSIXTEMP	Temperature sensor. Uses two (2) zones - one for low-temperature detection (COLD), one for high-temperature detection (HOT). Low-temperature detection activates when temperature falls below 45°F for ten (10) minutes. High-temperature detection activates when temperature rises above 95°F. Faulted zone restores when temperature is inside normal threshold for at least ten (10) minutes. Accurate within +/- 3°F.
Honeywell Home PROINDMV	Full-motion video sensor. Combines a PIR motion detection sensor with a full-motion video camera, and begins recording video when activated while the system is Armed Away and an alarm is triggered. Video is sent from Total Connect 2.0 to the end user via text and/or email. User cannot request a video clip or a live look-in from TC2. Provides a coverage area of 39 by 54 feet with a 90° viewing angle. Offers pet immunity for small animals under 80 lbs.

But the PROSIX Sensors and classic SiX Series Sensors are not your only sensor options for the Honeywell Home PROA7PLUS. If you add a Honeywell Home PROTAKEOVER Module to the system, then your PROA7PLUS will be able to interface with wireless sensors from one (1) of five (5) selectable legacy sensor frequencies. The PROTAKEOVER Module has a dial that allows you to choose which one (1) legacy frequency you want to use. Your options include Honeywell 5800 Sensors, 2GIG 345 MHz Sensors, legacy DSC 433 MHz Sensors, legacy Qolsys & Interlogix/GE 319.5 MHz Sensors, and Bosch 433 MHz Sensors. In addition, this module is what allows the PROA7PLUS to support 250 zones. Of these maximum 250 zones, 127 are for use with PROSIX and classic SiX Series Sensors, and the other 123 are for the legacy sensors you can add after installing the PROTAKEOVER Module. One limitation of the PROTAKEOVER Module is that it should NOT be used to interface life-safety sensors like smoke detectors and CO detectors with the PROA7PLUS System.

There is one other important note about using the Honeywell Home PROTAKEOVER Module with the PROA7PLUS. Once you install the PROTAKEOVER inside the system, you will NOT be able to use the current Honeywell Home PROA7DM Desk Mount with the system. The PROA7DM is an accessory that allows you to conveniently rest the system upright on a table or desk, instead of hard-mounting it to a wall. In other words, you must choose between the PROTAKEOVER Module and the PROA7DM Desk Mount. Fortunately, you will still be able to mount the PROA7PLUS System on the wall like normal when using the PROTAKEOVER Module. The reason for this is that the PROTAKEOVER module comes with a replacement wall mounting plate which contains the antenna used for the legacy wireless devices. The PROA7DM also comes with a replacement mounting plate, but it does. not have the required antenna built-in. Resideo says that a new version of the PROA7DM Desk Mount will eventually be released that will allow you to use it with the PROTAKEOVER Module. Unfortunately, we do not have an estimated release date for the updated PROA7DM at this time.

One other option for adding sensors to the Honeywell PROA7PLUS Alarm System is to use a wired to wireless converter. This type of device will allow you to pair hardwired sensors with the system that otherwise wouldn't be able to interface. The way that this works is by having the wired sensors wire-in directly with the converter unit. The converter then sends a wireless signal to the alarm panel on behalf of the wired sensors. As far as the PROA7PLUS is concerned, it will just see the wired sensors as wireless devices and allow them to pair with wireless system zones. Resideo offers a special wired to wireless converter exclusively for the PROA7PLUS called the Honeywell Home PROSIXC2W. The PROSIXC2W transmits at the same encrypted wireless frequency as the PROSIX Series Sensors, making it extremely safe and secure. And it can communicate with the PROA7PLUS System from more than 300 nominal feet away. Overall, the PROSIXC2W is a fantastic option if you have existing wired sensors on an older system and you are looking to upgrade to a new PROA7PLUS Panel.

Now that we have discussed all the sensor options for the Honeywell Home PROA7PLUS, we now want to discuss automation options for the system. The Honeywell Home PROA7PLUS has a built-in Z-Wave Plus controller, just like what is inside the Qolsys IQ Panel 2 Plus and the 2GIG GC3e. This is an upgrade of the standard classic Z-Wave controller that is found inside the Honeywell Lyric. By using certified Z-Wave Plus devices with the PROA7PLUS, you will be able to achieve an extended wireless range and battery life. We strongly recommend checking out our 2020 Holiday Buying Guide for Automation to learn more about the Z-Wave Plus devices we recommend pairing with the PROA7PLUS. Additionally, it is expected that the PROA7PLUS will eventually be able to support Apple HomeKit, just like the Honeywell Lyric. Unfortunately, we do not have an ETA for when this will be made available. For now, we recommend using Z-Wave Plus devices for automation with the Honeywell Home PROA7PLUS Security Panel.

Please note that up to 78 total Z-Wave devices can be paired with the PROA7PLUS, which includes 60 lighting modules, 6 garage door controllers, 6 door locks, and 6 thermostats. Any Z-Wave device used with the system will also be pushed over to Total Connect 2.0 for remote control, assuming that the PROA7PLUS System is monitored.

Our next topic involves communicator options for the Honeywell Home PROA7PLUS. The system comes with a built-in WIFI card for IP connectivity. This means that you can get it monitored and set up with AlarmNet and Total Connect 2.0 right out of the box, with no additional add-ons. This is great for users who want low-cost IP-only alarm monitoring service from an Alarm Grid Bronze Plan or an Alarm Grid Silver Plan. But you should keep in mind that by doing this, your monitoring service and your safety will be dependent upon your internet connection. If you experience an internet outage, then your PROA7PLUS Alarm System will have no way of communicating signals to you or to a monitoring station.

That is why we strongly recommend upgrading to cellular communication. By installing a compatible cellular communicator inside the system. This will require upgrading to a more expensive cellular alarm monitoring plan, such as an Alarm Grid Gold Plan or an Alarm Grid Platinum Plan. But the advantage to doing this is that your system will stay connected with AlarmNet and Total Connect 2.0 even during an internet outage. You may want to review this post that thoroughly outlines our monitoring plans for more information. Remember, our Gold and Platinum Plans include BOTH cellular AND internet, meaning that you can set up your PROA7PLUS with what is commonly referred to as dual-path connectivity.

We currently have two (2) cellular communicator add-on options for the PROA7PLUS, and they are outlined below.

Model	Notes
Honeywell Home PROLTE-A	AT&T LTE AlarmNet Communicator for Honeywell Home PROA7PLUS.
Honeywell Home PROLTE-V	Verizon LTE AlarmNet Communicator for Honeywell Home PROA7PLUS.

The last thing we want to discuss are some miscellaneous accessories that you can use with the Honeywell Home PROA7PLUS. These are just various replacement parts and add-ons that can improve your user experience. Some of the most notable products listed here are secondary keypads that you can use to control your security system from a second on-site location. This section also includes wireless external sirens that you can use to spread out your system's alarm sound across a larger area to ensure that everyone is alerted in the event of an emergency. These products don't really fit in with any other category, so refer to the notes to learn more about these devices. Without further ado, let's take a look.

Like always, if you have any questions about the Honeywell Home PROA7PLUS or any of its accessories or add-ons, please email us at support@alarmgrid.com. This is also a great email to use if you are interested in starting new monitoring service or if you simply want more information. Our technicians and security system planners are here to respond to incoming emails from 9am to 8pm ET M-F. We look forward to hearing from you!

Alarm Grid is proud to announce that the next generation Honeywell Home PROA7PLUS Security System is available for purchase on our site. Today, we're going to explore this new system and find out whether or not its worth buying. Let's take a deep dive into the Honeywell Home PROA7PLUS!

We will cut right to the chase. The Honeywell Home PROA7PLUS from Resideo has been available on our site for a couple of months now. However, we have been hesitant to promote it due to one glaring factor. The system lacks support for local end user programming. This means that the system can only be programmed and configured by your monitoring provider. You will need to contact Alarm Grid, or whomever you are using for monitoring service, whenever you want to make changes to the system programming settings. You won't be able to enter programming locally and conveniently make adjustments to the majority of system settings and configurations. This goes against our primary principle as a DIY monitoring provider, and it is such a big concern that we have been reluctant to announce it.

Now, the news isn't all bad. Other than its lack of local programming, the PROA7PLUS is a very nice alarm panel. it's sleek, crisp, and it looks great mounted on a wall. The system turns heads with its gorgeous 7-inch full-color display screen that offers easy and convenient touchscreen control. And it wouldn't be complete without the panel's powerful features, which we will certainly be discussing later in this post. Plus, we have received a promise from Resideo that local programming support for the PROA7PLUS will be made available in a future update, which is expected to be made available sometime in the first half of 2021. For now, you are certainly welcome to purchase the Honeywell Home PROA7PLUS from us, and we are happy to monitor the system and help you with setting it up and configuring it to your liking. But for the time being, it is not one of our top security system picks. If you want to learn more about some systems that we currently recommend purchasing instead of the PROA7PLUS, then please check out our 2020 Holiday Buying Guide for Alarm Panels, which includes the Honeywell Lyric, also from Resideo.

With that out of the way, we can begin focusing on the positive aspects of the Honeywell Home PROA7PLUS. And there really is a lot to discuss in that regard. The system supports up to 127 zones out of the box, and it can support up to 250 with the proper add-on, which we'll cover later. There are also 32 key fob slots. The main sensors you'll be using with the PROA7PLUS are the Honeywell Home PROSIX Series Sensors. These state-of-the art sensors are built exclusively for use with the PROA7PLUS. They utilize top-of-the-line 128-bit AES encryption, and they boast a wireless range of more then 300 nominal feet. You can also use the Honeywell SiX Series Sensors, which were originally built for use with the Lyric, with the PROA7PLUS. But be warned, once you pair an original SiX Series Sensor with a PROA7PLUS, it will receive an update and then you will never be able to use it with a Lyric System again.

For this buying guide, we'll primarily be focusing on the PROSIX Sensors built exclusively for the PROA7PLUS. Let's check out the PROSIX Series Sensors.

Model	Notes
Honeywell Home PROSIXCO	Carbon monoxide sensor. Emits 85 dB Temporal 4 sounder upon activation. Includes One-Go-All-Go functionality.
Honeywell Home PROSIXCOMBO	Combination smoke, heat, and carbon monoxide sensor. Includes built-in 85 dB sounder that emits Temporal 3 sound for smoke and heat, and Temporal 4 sound for CO. Includes One-Go-All-Go functionality.
Honeywell Home PROSIXCT	Door and window contact sensor. Magnet spacing gap of 0.75". Includes terminal block for single NC wired contact sensor. Has battery life of approximately five (5) years. Offers wireless range of 300+ feet. Measures 3.13"L x 1.61"W x 1.0"D.
Honeywell Home PROSIXFLOOD	Flood sensor. Sends alert to system within 15 seconds of detecting liquid. Comes with detachable Honeywell FP280 Probe that measures 15 feet in length.
Honeywell Home PROSIXFOB	Four-button key fob. Allows for dual-button inputs, for a maximum total of eight (8) inputs. Includes key ring for easy carry.
Honeywell Home PROSIXGB	Glass break detection sensor. Includes 25-foot detection range, and four (4) sensitivity settings. Honeywell FG701 is recommended glass break simulator.
Honeywell Home PROSIXMED	Single-button medical alert. Activation requires pressing and holding single button for three (3) full seconds. Only uses one (1) zone on system. Water-resistant. Includes accessory clip for device to be worn as wristband, lanyard, or belt clip.
Honeywell Home PROSIXMINI	Mini door and window sensor. Magnet spacing gap of 1.15" on wood, and 0.5" on metal. Has battery life of approximately five (5) years. Offers wireless range of 200+ feet. Measures. 2.44"L x 1.25"W x 0.45"D.
Honeywell Home PROSIXMINI2	Mini door and window sensor. Magnet spacing gap of 1.15". Has battery life of approximately seven (7) years. Offers wireless range of 500+ feet. Measures 2.9"L x 1.15"W x 0.75"D.
Honeywell Home PROSIXPANIC	Dual-button panic. Activation requires pressing and holding BOTH buttons for three (3) full seconds. Only uses one (1) zone on system. Water resistant. Includes accessory clip for device to be worn as wristband, lanyard, or belt clip.
Honeywell Home PROSIXPIR	PIR motion detection sensor. Has maximum detection area of 40 by 56 feet with 90° viewing angle. Supports pet immunity for small animals weighing up to 80 lbs.
Honeywell Home PROSIXSHOCK	Three-zone, all-in-one shock, contact, and transmitter sensor. Each function (service) can be turned ON or OFF as needed. Shock coverage area of about 10 to 12 square feet (5 to 6 foot radius). Four (4) sensitivity options for shock detection. Contact magnet spacing gap is 0.75" on wood surface. Wireless transmitter is for NC contact sensors only. Measures 3.13"L x 1.61"W x 1"D.
Honeywell Home PROSIXSMOKEV	Smoke and heat detector. Photoelectric smoke detection. Heat sensor activates at Fixed Temperature of 135°F, or Rate-of-Rise of 15°F in single minute when temperature is 104°F or higher. Emits 85 dB Temporal 3 sounder upon activation. Includes One-Go-All-Go functionality.
Honeywell Home PROSIXTEMP	Temperature sensor. Uses two (2) zones - one for low-temperature detection (COLD), one for high-temperature detection (HOT). Low-temperature detection activates when temperature falls below 45°F for ten (10) minutes. High-temperature detection activates when temperature rises above 95°F. Faulted zone restores when temperature is inside normal threshold for at least ten (10) minutes. Accurate within +/- 3°F.
Honeywell Home PROINDMV	Full-motion video sensor. Combines a PIR motion detection sensor with a full-motion video camera, and begins recording video when activated while the system is Armed Away and an alarm is triggered. Video is sent from Total Connect 2.0 to the end user via text and/or email. User cannot request a video clip or a live look-in from TC2. Provides a coverage area of 39 by 54 feet with a 90° viewing angle. Offers pet immunity for small animals under 80 lbs.

But the PROSIX Sensors and classic SiX Series Sensors are not your only sensor options for the Honeywell Home PROA7PLUS. If you add a Honeywell Home PROTAKEOVER Module to the system, then your PROA7PLUS will be able to interface with wireless sensors from one (1) of five (5) selectable legacy sensor frequencies. The PROTAKEOVER Module has a dial that allows you to choose which one (1) legacy frequency you want to use. Your options include Honeywell 5800 Sensors, 2GIG 345 MHz Sensors, legacy DSC 433 MHz Sensors, legacy Qolsys & Interlogix/GE 319.5 MHz Sensors, and Bosch 433 MHz Sensors. In addition, this module is what allows the PROA7PLUS to support 250 zones. Of these maximum 250 zones, 127 are for use with PROSIX and classic SiX Series Sensors, and the other 123 are for the legacy sensors you can add after installing the PROTAKEOVER Module. One limitation of the PROTAKEOVER Module is that it should NOT be used to interface life-safety sensors like smoke detectors and CO detectors with the PROA7PLUS System.

There is one other important note about using the Honeywell Home PROTAKEOVER Module with the PROA7PLUS. Once you install the PROTAKEOVER inside the system, you will NOT be able to use the current Honeywell Home PROA7DM Desk Mount with the system. The PROA7DM is an accessory that allows you to conveniently rest the system upright on a table or desk, instead of hard-mounting it to a wall. In other words, you must choose between the PROTAKEOVER Module and the PROA7DM Desk Mount. Fortunately, you will still be able to mount the PROA7PLUS System on the wall like normal when using the PROTAKEOVER Module. The reason for this is that the PROTAKEOVER module comes with a replacement wall mounting plate which contains the antenna used for the legacy wireless devices. The PROA7DM also comes with a replacement mounting plate, but it does. not have the required antenna built-in. Resideo says that a new version of the PROA7DM Desk Mount will eventually be released that will allow you to use it with the PROTAKEOVER Module. Unfortunately, we do not have an estimated release date for the updated PROA7DM at this time.

One other option for adding sensors to the Honeywell PROA7PLUS Alarm System is to use a wired to wireless converter. This type of device will allow you to pair hardwired sensors with the system that otherwise wouldn't be able to interface. The way that this works is by having the wired sensors wire-in directly with the converter unit. The converter then sends a wireless signal to the alarm panel on behalf of the wired sensors. As far as the PROA7PLUS is concerned, it will just see the wired sensors as wireless devices and allow them to pair with wireless system zones. Resideo offers a special wired to wireless converter exclusively for the PROA7PLUS called the Honeywell Home PROSIXC2W. The PROSIXC2W transmits at the same encrypted wireless frequency as the PROSIX Series Sensors, making it extremely safe and secure. And it can communicate with the PROA7PLUS System from more than 300 nominal feet away. Overall, the PROSIXC2W is a fantastic option if you have existing wired sensors on an older system and you are looking to upgrade to a new PROA7PLUS Panel.

Now that we have discussed all the sensor options for the Honeywell Home PROA7PLUS, we now want to discuss automation options for the system. The Honeywell Home PROA7PLUS has a built-in Z-Wave Plus controller, just like what is inside the Qolsys IQ Panel 2 Plus and the 2GIG GC3e. This is an upgrade of the standard classic Z-Wave controller that is found inside the Honeywell Lyric. By using certified Z-Wave Plus devices with the PROA7PLUS, you will be able to achieve an extended wireless range and battery life. We strongly recommend checking out our 2020 Holiday Buying Guide for Automation to learn more about the Z-Wave Plus devices we recommend pairing with the PROA7PLUS. Additionally, it is expected that the PROA7PLUS will eventually be able to support Apple HomeKit, just like the Honeywell Lyric. Unfortunately, we do not have an ETA for when this will be made available. For now, we recommend using Z-Wave Plus devices for automation with the Honeywell Home PROA7PLUS Security Panel.

Please note that up to 78 total Z-Wave devices can be paired with the PROA7PLUS, which includes 60 lighting modules, 6 garage door controllers, 6 door locks, and 6 thermostats. Any Z-Wave device used with the system will also be pushed over to Total Connect 2.0 for remote control, assuming that the PROA7PLUS System is monitored.

Our next topic involves communicator options for the Honeywell Home PROA7PLUS. The system comes with a built-in WIFI card for IP connectivity. This means that you can get it monitored and set up with AlarmNet and Total Connect 2.0 right out of the box, with no additional add-ons. This is great for users who want low-cost IP-only alarm monitoring service from an Alarm Grid Bronze Plan or an Alarm Grid Silver Plan. But you should keep in mind that by doing this, your monitoring service and your safety will be dependent upon your internet connection. If you experience an internet outage, then your PROA7PLUS Alarm System will have no way of communicating signals to you or to a monitoring station.

That is why we strongly recommend upgrading to cellular communication. By installing a compatible cellular communicator inside the system. This will require upgrading to a more expensive cellular alarm monitoring plan, such as an Alarm Grid Gold Plan or an Alarm Grid Platinum Plan. But the advantage to doing this is that your system will stay connected with AlarmNet and Total Connect 2.0 even during an internet outage. You may want to review this post that thoroughly outlines our monitoring plans for more information. Remember, our Gold and Platinum Plans include BOTH cellular AND internet, meaning that you can set up your PROA7PLUS with what is commonly referred to as dual-path connectivity.

We currently have two (2) cellular communicator add-on options for the PROA7PLUS, and they are outlined below.

Model	Notes
Honeywell Home PROLTE-A	AT&T LTE AlarmNet Communicator for Honeywell Home PROA7PLUS.
Honeywell Home PROLTE-V	Verizon LTE AlarmNet Communicator for Honeywell Home PROA7PLUS.

The last thing we want to discuss are some miscellaneous accessories that you can use with the Honeywell Home PROA7PLUS. These are just various replacement parts and add-ons that can improve your user experience. Some of the most notable products listed here are secondary keypads that you can use to control your security system from a second on-site location. This section also includes wireless external sirens that you can use to spread out your system's alarm sound across a larger area to ensure that everyone is alerted in the event of an emergency. These products don't really fit in with any other category, so refer to the notes to learn more about these devices. Without further ado, let's take a look.

Like always, if you have any questions about the Honeywell Home PROA7PLUS or any of its accessories or add-ons, please email us at support@alarmgrid.com. This is also a great email to use if you are interested in starting new monitoring service or if you simply want more information. Our technicians and security system planners are here to respond to incoming emails from 9am to 8pm ET M-F. We look forward to hearing from you!

Alarm Grid has been hearing reports from 2GIG GC3 and 2GIG GC3e users with trouble conditions that they cannot clear. According to reports, these unclearable errors only occur on these systems when Smart Area Partitioning is enabled. While inconvenient, they shouldn't cause much issue.

When a "trouble" condition appears on a 2GIG GC3 or 2GIG GC3e with partitions enabled, the "Smart Areas" menu button on the panel will appear yellow. Normally, you fix the trouble condition itself first. Then, you acknowledge the trouble by clicking on Smart Areas, entering your Master Code, and clicking the "speech bubble" next to the partition associated with the trouble. Then the trouble should clear, and the Smart Areas button should return to its usual blue state, indicating that everything is normal. More information on the trouble-clearing process can be found in this FAQ.

In the case of our customers who have reported this issue, they received a valid trouble condition of "Console Broadband Network Failure" or "Cellphone Communication Failure" appearing on various Smart Areas of their GC3 and GC3e systems. Because this was a system trouble, it showed up on multiple partitions. The trouble condition was then resolved successfully, as evidenced by the ability to send successful test signals via all communication paths to Alarm.com. However, the trouble message became stuck in multiple partitions and could not be cleared by any means.

Alarm Grid was able to replicate a similar issue through a relatively unique method. We found that if you enrolled a sensor with a GC3 or GC3e, put the sensor into a trouble condition (e.g. loss of RF supervision, cover tamper, etc.), and then deleted that sensor from the system without ever correcting and clearing the trouble condition, then the same situation would occur. Whichever partition the sensor was assigned to would be stuck with a permanent trouble condition that could never be cleared, regardless of which troubleshooting method was attempted. Of course, this would rarely happen in practice, as a responsible user would fix a trouble condition before intentionally deleting a sensor. But nevertheless, we were able to replicate a similar problem in practice.

Various methods have been attempted to fix this issue, but nothing has worked at removing these seemingly unclearable troubles. Some of the methods attempted have included disabling and then reenabling partitions, powering down the panel for a hard reboot, performing a reboot through System Manager, upgrading the firmware version, and factory defaulting the system. Users have reported that once they acknowledge the error that the panel stops making any audible sounds associated with the trouble condition, but still, the Smart Areas button remains a disturbing yellow color.

Not every GC3 and GC3e with partitions enabled appears to be affected. From what we can tell, only a small number of these systems are displaying such an error. Either that, or most users have chosen simply to ignore the issue, and not report it to us. Most of our monitored customers with a GC3 or GC3e have not reported this issue. But the ones who have reported the issue have left us at a loss for a solution. We apologize to these users, as we know how frustrating this can be. We don't often encounter issues we can't solve with a little bit of thinking, but this is one of those rare cases where we are just as confused as you are.

While this issue is annoying and bothersome, it doesn't appear to have any major impact on the performance of the system. The GC3 or GC3e System will still report to Alarm.com as intended, and it can still be relied upon for security and life-safety purposes. The one pressing factor though is that this issue can make it difficult for a user to determine when in fact there is a legitimate trouble condition on their system. Most GC3 and GC3e users who use partitions rely on the Smart Areas button to tell them if something is wrong. If it's blue, then everything is okay. But if it's yellow, then something needs their attention. This is a pretty simple check, and when it's not functioning properly, it's understandably frustrating.

Unfortunately, we do not have a solid fix for this problem at the current time. But luckily, if a new trouble condition occurs, the system will provide a trouble beep locally. It will continue to beep until a user acknowledges the new trouble condition. In addition, if you have trouble notifications enabled through Alarm.com, then you will also receive a new trouble notification via text, email, and/or push notification should any new issues arise. Nortek and 2GIG have been apprised of this error, and advise they are working on a fix.

Our reports indicate that this issue is still present in both the latest GC3 Firmware and the latest GC3e Firmware. The highest firmware currently available for these panels is Version 3.2.5, and even systems on this latest firmware have been shown to be affected. We are hopeful that 2GIG and Nortek will release a fix for these unclearable trouble conditions in Firmware Version 3.2.6. But unfortunately, we have not yet received any indication that such a fix will be implemented. We also have no release date for Version 3.2.6 at this time. Again, we apologize for any inconvenience.

If you are affected by a trouble condition that you cannot clear, make sure to try the conventional methods of clearing it first. Correct the cause of the trouble, and then acknowledge the trouble by following the the steps in the FAQ linked earlier in this post. If you still can't clear the trouble, then please, report it to our support team by emailing support@alarmgrid.com. Your data is valuable to us in reporting the problem to 2GIG and Nortek so that a fix can be implemented. Our support team is available to check and respond to emails from 9am to 8pm ET M-F. As always we look forward to hearing from you!

Alarm Grid has been hearing reports from 2GIG GC3 and 2GIG GC3e users with trouble conditions that they cannot clear. According to reports, these unclearable errors only occur on these systems when Smart Area Partitioning is enabled. While inconvenient, they shouldn't cause much issue.

When a "trouble" condition appears on a 2GIG GC3 or 2GIG GC3e with partitions enabled, the "Smart Areas" menu button on the panel will appear yellow. Normally, you fix the trouble condition itself first. Then, you acknowledge the trouble by clicking on Smart Areas, entering your Master Code, and clicking the "speech bubble" next to the partition associated with the trouble. Then the trouble should clear, and the Smart Areas button should return to its usual blue state, indicating that everything is normal. More information on the trouble-clearing process can be found in this FAQ.

In the case of our customers who have reported this issue, they received a valid trouble condition of "Console Broadband Network Failure" or "Cellphone Communication Failure" appearing on various Smart Areas of their GC3 and GC3e systems. Because this was a system trouble, it showed up on multiple partitions. The trouble condition was then resolved successfully, as evidenced by the ability to send successful test signals via all communication paths to Alarm.com. However, the trouble message became stuck in multiple partitions and could not be cleared by any means.

Alarm Grid was able to replicate a similar issue through a relatively unique method. We found that if you enrolled a sensor with a GC3 or GC3e, put the sensor into a trouble condition (e.g. loss of RF supervision, cover tamper, etc.), and then deleted that sensor from the system without ever correcting and clearing the trouble condition, then the same situation would occur. Whichever partition the sensor was assigned to would be stuck with a permanent trouble condition that could never be cleared, regardless of which troubleshooting method was attempted. Of course, this would rarely happen in practice, as a responsible user would fix a trouble condition before intentionally deleting a sensor. But nevertheless, we were able to replicate a similar problem in practice.

Various methods have been attempted to fix this issue, but nothing has worked at removing these seemingly unclearable troubles. Some of the methods attempted have included disabling and then reenabling partitions, powering down the panel for a hard reboot, performing a reboot through System Manager, upgrading the firmware version, and factory defaulting the system. Users have reported that once they acknowledge the error that the panel stops making any audible sounds associated with the trouble condition, but still, the Smart Areas button remains a disturbing yellow color.

Not every GC3 and GC3e with partitions enabled appears to be affected. From what we can tell, only a small number of these systems are displaying such an error. Either that, or most users have chosen simply to ignore the issue, and not report it to us. Most of our monitored customers with a GC3 or GC3e have not reported this issue. But the ones who have reported the issue have left us at a loss for a solution. We apologize to these users, as we know how frustrating this can be. We don't often encounter issues we can't solve with a little bit of thinking, but this is one of those rare cases where we are just as confused as you are.

While this issue is annoying and bothersome, it doesn't appear to have any major impact on the performance of the system. The GC3 or GC3e System will still report to Alarm.com as intended, and it can still be relied upon for security and life-safety purposes. The one pressing factor though is that this issue can make it difficult for a user to determine when in fact there is a legitimate trouble condition on their system. Most GC3 and GC3e users who use partitions rely on the Smart Areas button to tell them if something is wrong. If it's blue, then everything is okay. But if it's yellow, then something needs their attention. This is a pretty simple check, and when it's not functioning properly, it's understandably frustrating.

Unfortunately, we do not have a solid fix for this problem at the current time. But luckily, if a new trouble condition occurs, the system will provide a trouble beep locally. It will continue to beep until a user acknowledges the new trouble condition. In addition, if you have trouble notifications enabled through Alarm.com, then you will also receive a new trouble notification via text, email, and/or push notification should any new issues arise. Nortek and 2GIG have been apprised of this error, and advise they are working on a fix.

Our reports indicate that this issue is still present in both the latest GC3 Firmware and the latest GC3e Firmware. The highest firmware currently available for these panels is Version 3.2.5, and even systems on this latest firmware have been shown to be affected. We are hopeful that 2GIG and Nortek will release a fix for these unclearable trouble conditions in Firmware Version 3.2.6. But unfortunately, we have not yet received any indication that such a fix will be implemented. We also have no release date for Version 3.2.6 at this time. Again, we apologize for any inconvenience.

If you are affected by a trouble condition that you cannot clear, make sure to try the conventional methods of clearing it first. Correct the cause of the trouble, and then acknowledge the trouble by following the the steps in the FAQ linked earlier in this post. If you still can't clear the trouble, then please, report it to our support team by emailing support@alarmgrid.com. Your data is valuable to us in reporting the problem to 2GIG and Nortek so that a fix can be implemented. Our support team is available to check and respond to emails from 9am to 8pm ET M-F. As always we look forward to hearing from you!