New Firmware Updates for Qolsys IQ Panel 2 Plus and 2GIG GC3e & GC3
Posted By Michael GorisHi DIYers! We are happy to announce that there are new firmware updates available for the Qolsys IQ Panel 2 Plus and the 2GIG GC3e & GC3 Systems. Qolsys users can apply the firmware update locally at the panel. 2GIG users can apply from USB or have it pushed from Alarm.com for a small fee.
 |
 |
 |
Qolsys IQ Panel 2 Plus Version 2.3.4
Starting with the Qolsys IQ Panel 2 Plus, Firmware Update 2.3.4 is now available. This is a relatively minor upgrade to the system that improves recognition of the PowerG daughterboard for supporting wireless PowerG Sensors. Although you can technically apply this update to an original Qolsys IQ Panel 2 System, it won't make a difference, because that system does not have a PowerG daughtercard. Since you can apply this update locally at the panel, there is no fee required to receive this update. Remember, your system must be actively monitored and connected with Alarm.com for the update to go through.
In order to apply this update, you must have your Qolsys IQ Panel 2 Plus connected to WIFI. The panel should be plugged into AC power, and it should not have a low-battery condition. To begin, start from the main screen of the system. Press the small grey bar at the top of the screen. Choose Settings > Advanced Settings> Installer Code (default 1111) > Upgrade Software > Patch Tag > enter iqpanel2.3.4 > OK > Upgrade Using Network. The system should begin downloading the update. Once the download is complete, the update will be applied. This process should take about five (5) minutes. The panel will reboot at this time. The process is complete after the reboot finishes.
2GIG GC3e & GC3 Firmware Version 3.2.3
The 2GIG GC3e System just became available very recently. This Firmware Update Version 3.2.3 is a great way to get your new GC3e System up and running. Additionally, existing users of the original 2GIG GC3 System can also apply this same update. The update provides support for the new AT&T LTE Communicator (coming soon!) and allows for 6-digit user codes with both the panel and compatible Z-Wave locks. It also provides various fixes and helps the system run smoother overall. It is recommended that every GC3e and GC3 user receives this update so that they can continue to get the most out of their system.
The easiest way to receive Firmware Version 3.2.3 is to simply have it pushed down from Alarm.com. To do this, the system must have an Alarm.com Cellular Communicator installed and activated. You must contact your alarm company and ask them to push the update. There will be a small fee for this service. If you don't have Alarm.com, you can get more information on our monitoring page. The latest update can also be applied directly at the panel. To do this, you must download the update file onto a USB flash drive and insert the drive into the panel. You will then be able to apply the update locally at no cost. More information on this process can be found in this helpful FAQ. Although that FAQ is specific to the original 2GIG GC3 System, the 2GIG GC3e will follow the same process. Remember, there is no cost required to update via USB.
If you have questions about either of these firmware updates, or if you would like to learn more about our monitoring services, please reach out to us! The best way to contact us is always to email support@alarmgrid.com. We will check your email at our earliest convenience and reply back as soon as possible. You may also call us at (888) 818-7728 during our normal business hours of 9am to 8pm EST M-F. We look forward to hearing from you and answering your questions!
