2GIG F1-345 Posts

Sometimes we like to speculate about security system sensors and equipment that, for whatever reason, has yet to be announced for built by manufacturers. Today, we're going to discuss some sensor ideas that we wish existed in reality, but for now only remain ideas inside of our own heads.

Keep in mind that while these ideas may seem very plausible and realistic, they are still nothing more than ideas at this point. None of these ideas have been announced or mentioned by manufacturers, and it's likely that these concepts may never become a reality. This is just for fun, and we're merely floating around ideas. Don't get your hopes up and expect these sensors to be available on our website any time soon. And if you happen to be a manufacturer reading this, then take notes, as we think these products could be big hits.

PowerG Heat Sensor

The PowerG lineup is known for its excellent diversity, as it offers sensors of nearly all types. But one sensor that is noticeably absent from this lineup is a standalone heat sensor. We regularly get requests from Qolsys IQ Panel 2 Plus users who want a fire detection sensor for use in an area where a conventional smoke detector would be prone to false alarms. Such areas can include kitchens, garages, bathrooms, and attics.

We're pretty surprised that Johnson Controls hasn't produced a standalone heat sensor option for their PowerG lineup yet. It could be as simple as making it so that you can disable smoke detection on a dual-function smoke & heat sensor. This is already possible with the Honeywell SiXSMOKE, so we're sure this could be done for the DSC PG9936 as well. On that note, we would also love to see a PowerG equivalent to the Honeywell SiXCOMBO and finally give PowerG System users a truly complete life-safety sensor option with built-in smoke, heat, and carbon monoxide detection.

Honeywell SiX Series Recessed Contact

This is another one we're a little surprised isn't already a thing. While Resideo has been somewhat choosy about which sensor types to make available for the Honeywell SiX Series Lineup, most of the omissions are understandable. But the absence of a recessed door and window contact is a bit of a head-scratcher. Resideo has produced many wireless and wired recessed contacts in the past, so we're not quite sure why they would forget to make an encrypted option for the massively popular Lyric Controller. One theory we have its that they are afraid the wireless signal range would be too lackluster.

While quite not as popular as surface-mount contacts due to the hole-drilling that is required, recessed contacts are appreciated by many users who want an aesthetically pleasing install. It's not like Resideo doesn't already know this. We have seen them offer a wide selection recessed contacts in the past. The company previously went out of their way to make the Honeywell SiXMINICT after the standard Honeywell SiXCT was deemed by many to be too bulky. For now, Lyric users remain stuck using non-encrypted devices like the Honeywell 5818MNL if they want to add recessed door and window contacts to their systems.

Qolsys Dual-Tech Motion Sensor

We've gotten the impression in recent times that Qolsys isn't really making their 319.5 MHz S-Line Sensors a top priority, as they instead seem to be focusing on producing the best security panels possible. The most popular sensors for all versions of the Qolsys IQ Panel 2 Plus are the PowerG Sensors, which are sold under the DSC banner. And it's very telling that the upcoming Qolsys IQ Hub is expected to only support PowerG Sensors and forgo legacy frequencies entirely. But that doesn't mean that Qolsys 319.5 MHz Sensors don't have their merits, and we think that a Qolsys Dual-Tech Motion Sensor would be quite useful.

A dual-tech motion sensor uses both passive infrared (PIR) and microwave detection technology to sense movement. This is opposed to a standard motion sensor that just uses PIR. The advantage to a dual-tech motion is that both its PIR sensor and its microwave sensor must be triggered before the sensor will activate. This can be crucial for false alarm prevention. Dual-tech motions are also known to offer pet immunity, which is often a major selling point for those with dogs and cats. We have seen dual-tech motion sensors made for many different security systems, and users typically have a decent selection to choose from.

But you're a bit out of luck if you need a 319.5 MHz wireless dual-tech motion, as Qolsys never seemed to make one. That's a bit of a letdown, especially considering that the 319.5 MHz version is the most popular model of the IQ Panel 2 Plus. At least the DSC PG9984P remains an option for that system, as well as any other system that can support PowerG.

More Fall Detection Sensors

Nortek Control changed the game for medical alert sensors when they introduced the 2GIG F1-345 Personal Safety Pendant with fall detection technology. Qolsys soon followed suit with their own Qolsys IQ Fall Pendant. Both of these sensors have built-in accelerometers for detecting the rapid change in movement that occurs during a slip and fall accident. They also retained the capability of a traditional medical alert button, as a user can press and hold the button to alert the system during an emergency. We thought that emergency fall sensors would become the next big thing.

But oddly enough, the development of new fall detection sensors seems to have stalled. We have yet to Resideo try their hand at a fall sensor with an accelerometer. The same is true for a potential release for the PowerG lineup from DSC. We're not quite sure what the hold up is, as the offerings from 2GIG and Qolsys have proven to be quite successful. Some members of our team have also proposed the idea of having these sensors send a second alert to the system if a prolonged period of no movement occurs following a detected fall, as such a scenario may indicate that the individual has seriously hurt themselves. There has also been talk of using rechargeable batteries for these devices, in order for the sensor to work for a longer time period before a battery replacement is needed.

Right now, these sensors are just ideas. But the best idea of all is to sign-up for alarm monitoring! Alarm Grid offers monitoring plans for all needs and budgets. We recommend checking our monitoring page for more information. If you are interested in getting started, please email us at support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

Hi DIYers! Are you looking for a reliable medical alert button for your elderly or mobility-challenged loved one? We have an answer with the Qolsys IQ Fall Pendant. This device will let your loved one live as independently as possible, while still being able to call for help when needed.

We know that having an elderly or mobility-challenged family member or loved one can present a tough dilemma. You want to respect their independence and privacy, but you also want to make sure that they can get help if you're not around. Medical alert buttons represent a good answer to this problem. Your loved one can continue to live on their own, but you will both know that help is available with the press of a button. We are sure that many users can get exactly the results they want with the IQ Fall Pendant.

The IQ Fall Pendant from Qolsys, which is also known as the QS1314-840, includes an attached 18-inch lanyard that is conveniently worn around the neck. Your family member or loved one can adjust the length of this lanyard so that it feels as comfortable as possible. Another convenience is the IP 45 water-resistant rating of the IQ Fall Pendant. This means that it can be safely brought in the bath or shower. Just make sure that it is not fully submerged for an extended period of time.

There are two (2) ways to activate the Qolsys IQ Fall Pendant. The standard method is to press and hold the center button. This button must be held down for a full half-second in order for it to activate. But the device also offers built-in fall detection using its integrated accelerometer. This way, if your family member or loved one experiences a fall and is unable to press the button, the device will still activate and alert the panel because of the rapid acceleration of the fall. As a safety precaution, you should instruct your loved one to always press and hold the center button after a fall. This is to make absolutely sure that the device activates when needed.

The IQ Fall Pendant is a 319.5 MHz medical alert button that was specifically created with the 319.5 MHz version of the Qolsys IQ Panel 2 Plus in mind. But you can really use it with any 319.5 MHz alarm system. This includes the original Qolsys IQ Panel 2 and the Interlogix Alarm Panels. If you have a Resideo Lyric Security Panel or a 2GIG Panel, then you might consider using the 2GIG F1-345, which also offers automatic fall detection. If you have a different 345 MHz system, such as Honeywell LYNX Touch Panel, then the Honeywell 5802WXT is a strong option. Although the 5802WXT doesn't offer fall detection, it is still a reliable medical alert button. And if you have a PowerG-compatible system, then the DSC PG9938 is a strong choice as well.

Regardless of which sensor you choose, you will want to make sure that you have central station monitoring service to accompany the device. This is the only way to ensure that your loved one receives the help that they need during alarm events. A central station monitoring plan will connect your alarm system with a round-the-clock, 24/7 monitoring station for emergency help whenever an alarm occurs. If your loved one triggers an auxiliary medical alarm by activating their help button, a trained dispatcher will know to send help immediately. You can learn more about alarm monitoring by checking our monitoring page.

If you have any questions about the Qolsys IQ Fall Pendant or any of our wireless medical alert buttons, please reach out to us! The best way to contact us for questions is to email support@alarmgrid.com. We make sure to check our email often, and we will reply back to your email at our earliest convenience. Another option is to call us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F. Our planning department will be happy to help you determine the best medical alert button for your needs. And remember that we offer free technical support for all our monitored customers. We look forward to hearing from you!

Hi DIYers! Today, we'd like to cover some of our newest products from 2GIG. These are all fairly unique 2GIG 345 MHz Sensors that can be used with 2GIG GC2, 2GIG GC3 and Honeywell Lyric Alarm Systems. We are sure that many users will take full advantage of these versatile new products!

We actually very briefly touched on these new sensors during our 2GIG ISC West 2019 Post, but we never had the opportunity to discuss them in-depth. These sensors will also work with the upcoming 2GIG GC2e and 2GIG GC3e Systems that should be arriving later this summer. Remember, these upcoming panels will support a lineup of encrypted sensors from 2GIG, as well as the current 2GIG 345 MHz Sensors and Honeywell 5800 Series Sensors.

As we said before, these are all fairly unique sensors. Some of these options have never truly been offered before. It's a good reason to get on-board with 2GIG and one of their wireless systems. And remember that you can always add a 2GIG RPTR1-345 Wireless Repeater if you need to increase the signal range for any of these wireless devices. Let's take a few moments to discuss each of these new sensors in full detail:

• 2GIG DW30-345 Outdoor Wireless Door Sensor: This a wireless outdoor contact sensor, much like the existing Honeywell 5816OD. The weather-resistant sensor can have an extended gap of two (2) inches between its magnet. However, it should ideally be less than an inch if possible for best results. It receives power using two (2) AA batteries, which can easily be swapped out when low. The 2GIG DW30-345 is great for outside doors, fences and gates that may be exposed to rain, wind, snow and excessive dust. It can be mounted on a flat or curved surface to meet the needs of the user.
  
  
  
  
• 2GIG STVGRL1-345 Stove & Grill Guard: This is a unique sensor that alerts an alarm system when a stove or grill has a burner that is left on. The sensor will remain in a fault condition whenever the burner control is left 20 degrees or more from the usual position. A user can set the associated wireless zone to display a trouble condition whenever the sensor left faulted. This way, they will know to turn the stove or grill off if they accidentally leave it on. It is also great for parents who are worried that their children may be playing with the burner. The device is small and discreet, and it is suitable for indoor and outdoor use.
  
  
  
  
• 2GIG F1-345 Safety Pendant With Fall Detection: This is a medical alert sensor that can detect the abrupt and sudden movement that occurs when a person falls down. Just like a conventional medical alert sensor, the user can press and hold a button if they experience a medical emergency or crisis. But the built-in fall detection is great for situations in which the user might be rendered unconscious and unable to press the button themselves. The device comes with a lanyard so that it can be easily worn, and it it is water-resistant with an IPx7 rating. The end user will have no problem using the F1-345 in the bath or shower if necessary.
  
  
  
  
• 2GIG GNGRD1-345 Gun Trigger Lock: This a helpful safety device that prevents a user from shooting a gun or firearm unless a 3-digit code is entered first. The sensor will also send an alert to the security system in the event that the weapon is moved or tampered with. This sensor is perfect for families of gun-owners who want to make sure that their children don't get into their weapons or firearms. It is strongly recommended for any gun-owner who wants to ensure that only they can access their weapon. The device is small, discreet and easily to apply. It is powered using a single CR2032 coin cell battery.
  
  
  

All of these sensors are available on the Alarm Grid website now! If you would like to learn more about any of these sensors, we recommend sending an email to support@alarmgrid.com. One of our security system experts will see your email and respond back as soon as possible. We look forward to hearing from you and helping you design the perfect alarm system for your needs!