DSC PG9944 Posts

Effective in August of 2022, Alarm.com is ending sales of Alarm.Com Image Sensors (ADC-IS-220-GC and ADC-IS-300-LP). Alarm Grid has already discontinued these sensors due to the fact that they are in short supply, and no more of them will be produced. Only the Honeywell Home PROINDMV remains.

The 2GIG IMAGE3:

There was some overlap between the Alarm.com Image Sensor models, and the 2GIG and Qolsys Image Sensor models. I have confirmed with Alarm.com that the 2GIG and Qolsys models are also discontinued as of August, 2022. Currently, the only Image Sensors being offered by Alarm Grid are the DSC PowerG and Honeywell Home PROINDMV models which are discussed in more detail below.

Image sensors were a great idea that never really took off. The original image sensors, first offered by 2GIG and Alarm.com, did not have particularly good resolution or picture quality, which is probably one reason they weren't widely adopted by the DIY crowd. By the time the 2nd generation of these sensors came around, people were prepared to simply go with full-on video monitoring or to avoid capturing images altogether.

Both the second and third-generation image sensors that were offered by 2GIG, Qolsys, and Alarm.com had very good image quality. Combine that with Alarm Grid's policy of offering monitoring for image sensors without an additional price markup, and the image sensor was a viable alternative to the use of video cameras. An Alarm.com user could log into their account and perform a "peek-in", meaning they could request that a particular image sensor grab a picture of whatever it was able to see at that moment, and the image (actually two (2) images) would then be uploaded to the customer's alarm.com account for viewing. The sensor could also take images upon sensing motion after a particular period of inactivity, or upon an alarm. For full details on image sensor features and operation, check out this prior post.

DSC offers a couple of PowerG PIR Cameras that will work with the Qolsys IQ Panel 2 and IQ Panel 4 in addition to the DSC PowerSeries Neo panels with a PowerG Transceiver added. These are the DSC PG9934P, Indoor PIR Camera, and the DSC PG9944, Outdoor PIR Camera. These sensors work like any other PowerG Sensor with the Qolsys Panels. They can only capture images when the system is armed and the image sensor is active (not bypassed). They send their images to the panel, and then the first image is uploaded to Alarm.com. A total of ten (10) images are taken, and these images are stitched together by the panel into a sort of stop-motion video where each image can also be viewed individually. This is done via the panel screen itself. When used with the PowerSeries Neo panels, the DSC PIR Cameras can be used for Visual Verification only, they do NOT work like a regular image sensor with Alarm.com.

DSC PG9934P, Indoor Image Sensor:

DSC PG9944, Outdoor Image Sensor:

The Honeywell Home PROINDMV is a wireless PIR motion sensor with a camera built-in, just like the 2GIG, Qolsys, and Alarm.com image sensors were. The PROINDMV is currently only supported on the Resideo PROA7PLUSC, and Honeywell Home PROA7PLUS panels. There is no "peek-in" option for these image sensors. They can only capture images when they sense motion while the system is armed in Away mode. Images or videos are captured and uploaded to Total Connect 2.0 for viewing. The user can choose to receive either a still image or a 10-second video clip. You can read their full details of operation in our previous post.

Honeywell Home PROINDMV:

It seems like the era of the image sensor may be coming to a close, at least for now. Who knows, once we're through the global chip shortage, and the availability of components is back to normal, perhaps the humble image sensor will experience a revival. If so, DIYers may want to consider giving these sensors a try. They really are an excellent idea. They can be used for alarm verification in this age of increasing police resistance to alarm response, and they are cheaper, both initially and on an ongoing month-to-month basis, than video cameras.

If you are looking for an affordable and effective way to monitor your home and see what's going on while you are away, then image sensors might be worth exploring. When used in conjunction with security systems, image sensors offer great function and convenience, all for a low price.

The simplest way to describe an image sensor is as a motion detection sensor combined with a still-picture camera. Unlike security cameras that capture full-motion video footage, most image sensors will only produce non-moving images. These are some of the most interesting and unique devices that you can use with a home alarm system. While image sensors certainly aren't for everyone, many end-users take full advantage of these peripherals and what they have to offer. Overall, image sensors can go a long way towards rounding out your security system and helping you get the most out of it.

Perhaps the best way to use image sensors is as alarm verification devices. If you live in a jurisdiction where verified response is required, then using image sensors is often the only option you can use to verify an intrusion, short of upgrading to full video monitoring service. Depending on the image sensor and system you are using, you may be able to achieve a setup where captured image sensor pictures are sent to the central station for immediate review. A trained operator can review the images and use them as sufficient proof of a crime in progress and use that as grounds for requesting emergency dispatch. You should check your local alarm codes and ask your monitoring company if verified response is enforced in your area. .Alarm Grid monitored customers can email us at support@alarmgrid,com. We respond to emails during our regular business hours of 9 am to 8 pm ET M-F.

You might be wondering why image sensors aren't more popular than they already are. While image sensors sound excellent in theory, and they often meet those high expectations in practice as well, they are somewhat quirky devices that can present a unique set of challenges. That's also not to mention that some image sensors have notable limitations and restrictions in how they can be used. This shouldn't scare you away from using them, but you should understand that you may have to overcome some obstacles to achieve the setup you want. And also understand that some systems cannot support image sensors in any fashion.

One thing to consider with image sensors is that they are always two-way communication devices. You might call them bi-directional sensors. With image sensors, it's not as simple as the sensor sending a signal to the alarm panel. The panel also needs to send signals to the image sensor. For example, if an alarm is triggered on the system, then the system needs to be able to tell the image sensor that an alarm has occurred, and the image sensor needs to capture a photo of the scene. Then the image sensor needs to turn around and send the image to the panel so that it can ultimately be distributed to an interactive security notification platform, and potentially the central station, and the end-user. The bi-directional communication is also what makes it possible for an end-user to request image sensor photos in real-time, when supported. Because of this, many alarm panels cannot support image sensors unless a specific image sensor transceiver module is added to facilitate two-way communication. And for some panels, image sensor support isn't even possible, as no compatible image sensors and/or image sensor transceivers exist for the panel.

Now that we have talked about image sensors in general, let's start exploring some of the specific models. To make this a bit more simple, we will try and focus on different options available on a panel-by-panel basis. Just like with regular sensors, image sensor support depends on which panel is being used. We will start by addressing the fact that most of the Honeywell Alarm Panels don't support image sensors, though there is an exception. The Honeywell Lyric, the Honeywell LYNX Panels, and the Honeywell VISTA Panels all lack image sensor support.

Interestingly though, the Honeywell Home and Resideo ProSeries Panels - PROA7PLUS, PROA7PLUSC, PROA7, and PROA7C - all have a fairly unique image sensor option in the Honeywell Home PROINDMV. This is the only image sensor presented in this blog that can be set to capture full-motion video (10 fps) or still motion images (320x240). Captured video and images can be viewed at the panel under Panel Camera History, with the ten (10) newest captures being available for viewing. Captured footage is also sent to Total Connect 2.0 for remote viewing. At the time of this writing, the PROINDMV is the only image sensor available for use with TC2. This also makes it the only image sensor we offer that can be used with an IP-only monitoring plan. We're sure that Resideo is also working on a way to make captured video and photos visible to central station operators, but we haven't heard of such a feature being set up just yet. There is also a downside to the PROINDMV in that you cannot use it to request video and/or images. In other words, no peek-in function is available for the PROINDMV, at least not at this time.

Moving onto the Alarm.com Security Systems, pretty much all of the most popular systems have some image sensor option available. It seems that Alarm.com has really embraced this technology and made it possible for almost all users to start using image sensors. We will start with the PowerG Image Sensors, which are some of the most popular image sensors we offer. As PowerG already operates using two-way communication, PowerG Image Sensors do not require any special modules or add-ons for support. You just need a system that supports regular PowerG Sensors, such as a Qolsys IQ Panel 2 Plus or a DSC PowerSeries NEO with an added PowerG Transceiver. And even better if you have an IQ2+ you will be able to view captured images from the alarm panel, in addition to viewing them from Alarm.com. One limitation however is that these image sensors will only capture images when they specifically trigger alarms on the system. Alarms caused by other zones will not result in the PowerG Image Sensors producing photos. There are currently two (2) PowerG Image Sensors, those being the DSC PG9934P Indoor Image Sensor and the DSC PG9944 Outdoor Image Sensor.

All of the other image sensors used with Alarm.com Systems require some type of hardware add-on for the panel. Sticking with Qolsys, adding the Qolsys IQ Card-IS to the original IQ Panel 2 will make it possible to enroll the Qolsys QZ81030-840 Image Sensor with the system. Technically, you can also add the IQ Card-IS to a newer Qolsys IQ Panel 2 Plus, but doing so will require it to "steal" the internal antenna used by the PowerG Daughtercard. This will result in the system having virtually zero useful wireless range with Power Sensors. As a result, anyone with an IQ Panel 2 Plus is strongly discouraged from going the route of the IQ Card-IS and QZ81030-840 combo, and just get PowerG Image Sensors instead. But if you do have an original IQ2, then using a QZ81030-840 with an IQ Card-IS is a great option.

The 2GIG Alarm Panels also support image sensors, but only if an image sensor module add-on has been added to the system. Starting with the 2GIG GC2 and its successor, the 2GIG GC2e, both systems can support the 2GIG IMAGE1 Image Sensor after a 2GIG XCVR2-345 Image Sensor Module has been added and installed. Unfortunately, for 2GIG GC2e users, adding the 2GIG XCVR2-345 will take away the system's ability to support 2GIG eSeries Encrypted Sensors. We have heard rumors in the past that a 2GIG XCVR2e-345 Image Sensor Transceiver Module would be specifically manufactured for the 2GIG GC2e so that the system could support both image sensors and encrypted sensors simultaneously, but it's looking increasingly likely as of late that such a release may never see the light of day. Even then, the 2GIG IMAGE1 is an older device, and it isn't known for producing the most detailed images. Still, for alarm verification purposes, it usually gets the job done. Both the IMAGE1 and the XCVR2-345 are still available on our website.

Moving onto the 2GIG GC3 and 2GIG GC3e, both of these systems support the 2GIG XCVR3-GC3 Image Sensor Module, to allow 2GIG IMAGE2 and 2GIG IMAGE3 Image Sensors to be paired. Don't let the need for the XCVR3-GC3 scare you away. The module is extremely affordable and very easy to install. It just uses a 4-wire connection with the system board, and it hangs out the back of panel. Unlike the issues experienced with the GC2e, adding the 2GIG XCVR3-GC3 to a GC3e will NOT take away the panel's ability to support 2GIG eSeries Encrypted Sensors. Furthermore, the supported image sensor devices for the XCVR3-GC3 are newer, and they are known for producing clearer images than the earlier IMAGE1. The 2GIG IMAGE2 is still relatively basic with its 320x240 QVGA resolution. But the 2GIG IMAGE3 really shines with its 640x480 VGA resolution, thereby making it one of the best image sensors on the market. These image sensors can be set to automatically produce images during alarm events, and a user can even manually request images using the "peek-in" feature on Alarm.com. All things considered, image sensor support for the GC3 and GC3e is surprisingly robust, and in our opinion, quite underrated. These really are some of the best alarm systems available for image sensor support, and we think more GC3 and GC3e users should take advantage of images sensors and what they can bring to one of these systems.

Unfortunately, we have to end this post with the sad story of image sensor support on the 2GIG Edge. While the 2GIG Edge has made a huge splash in the security industry, representing one of the most exciting panel debuts we have seen of late, image sensor support for the system is basically non-existent. To elaborate, the 2GIG Edge supports the same image sensor module add-on as the GC3 and GC3e, that being the 2GIG XCVR3-GC3, and it remains very easy to install, using the same 4-wire connection as before, and just hanging out the back of the panel. Once added, you can pair the 2GIG IMAGE3 Image Sensor with the Edge, but the 2GIG IMAGE2 is unsupported. We're glad that 2GIG chose the "better" of the two image sensors to work with the Edge, but we're still a bit surprised that the IMAGE2 can't interface with the Edge and the XCVR3-GC3 combo. Fortunately, just like with the 2GIG GC3e, adding the 2GIG XCVR3-GC3 to the Edge will not eliminate the system's ability to support 2GIG eSeries Encrypted Sensors.

However, and this is a big deal, the 2GIG Edge with 2GIG XCVR3-GC3 will only see the 2GIG IMAGE3 as a standard motion detection sensor. In other words, the Edge cannot receive any of the captured images from the IMAGE3. And since the Edge can't get the captured images, it therefore cannot forward them to Alarm.com and/or the central station. This makes the 2GIG IMAGE3 nothing more than a fancy motion sensor for the Edge. It's super unfortunate, and one of the saddest things to learn about the 2GIG Edge. There is a ray of hope though. 2GIG has stated that this behavior between the Edge and IMAGE3 is not intentional, and they are working on a firmware fix to provide true image sensor support for the Edge in the future. No ETA for a fix is currently available, but we are hopeful that the 2GIG Edge will one day be able to carry on 2GIG's legacy of having some of the best image sensor support in the industry. For more information, we have a blog on the limitations of the 2GIG Edge in regards to image sensor support, which you can view here. And you can certainly expect Alarm Grid to provide an update once image sensor support for the 2GIG Edge has been fixed and made to work as intended.

We hope that this post has opened up your mind towards adding image sensors to your security system. They really are some useful and handy devices when set up properly. Users in verified response jurisdictions who aren't quite ready to make the jump to video cameras and the more expensive monitoring plans that come with them can often get started with image sensors at very little cost. And with a bit of testing and configuration, yours can truly be great and help you keep your home safe. If you have any thoughts or questions about image sensors, please leave them in a comment down below. We are eager for some fun and enthusiastic discussion about image sensors and what they can offer for home security. And don't forget to keep checking the Alarm Grid Blog, as we will have some more great topics to cover and discuss in the near future.

Qolsys recently released a Technical Service Bulletin outlining an issue with the IQ2 and IQ2+ panels and PowerG sensors. In some cases, panels that have just installed either firmware version, or panels running these versions that are rebooted, may lose touch with existing PowerG sensors.

The problem, according to Qolsys, is the encryption key. In some rare cases, either during the reboot after the firmware update, or upon rebooting once the firmware update has been applied, the panel's encryption key can be set back to default. Once this occurs, any PowerG devices in the field that have been programmed into the panel will no longer be able to communicate successfully with the panel.

When this situation occurs, a previously working PowerG device will show status on the panel, and on Alarm.com if monitored, of "Not Networked". It may also show an "!" next to the zone's status on the panel's Home Screen. If this condition is allowed to continue for the full supervisory window of the sensor (24-hours for non-life safety sensors, 4-hours for life safety sensors by default) then each affected sensor will go into supervisory failure at the panel and will show a status of Malfunction when viewed through Alarm.com.

If you see this issue on your Qolsys IQ Panel 2 or IQ Panel 2 plus system, you'll need to delete ALL PowerG sensors from the panel, and then re-learn them from scratch. By doing so, a new encryption key will be created and shared with each PowerG device. Once this has been done, all devices should begin working normally again. PowerG devices should be reprogrammed from the panel, not from Alarm.com. This way, full functionality can be verified once programming is complete. It would be best to be sure the panel does not reboot again until the next firmware update, which will resolve this issue. Only PowerG devices are affected by this anomaly, any legacy RF devices using the 319.5MHz, 345MHz, or 433MHz frequencies, and any Z-Wave devices should not be affected by this issue.

If you haven't updated to 2.5.3 or 2.5.4 yet, it is recommended that you update locally at the panel, rather than through Alarm.com. You can find information on updating via Patch Tag or MicroSD card on our Qolsys IQ Panel 2 Plus Firmware Update Page. Sadly, this won't necessarily prevent this issue from happening, but by being onsite at the time of the update, you'll be able to verify proper PowerG sensor functionality on each of your sensors as soon as the update has completed. According to Qolsys, firmware version 2.5.5 will be released in the near future, though an exact date has not been provided. This version will resolve the root cause of this encryption key issue. Any additional future updates will also include the necessary fix.

If you're interested in no-contract, low-cost monitoring, or if you're an Alarm Grid customer (present or future) with questions, you can reach us at support@alarmgrid.com. We're here to check emails M - F from 9:00 am to 8:00 pm Eastern Time. Thanks for reading, stay safe!

You have likely heard us talking about the benefits of PowerG Sensors at one point or another. Today, we figured we would break down the benefits of these sensors and explain why we like them so much. Let's take an in-depth look at PowerG Sensors and all of their wonderful benefits.

PowerG Sensors were originally designed for the hardwired DSC PowerSeries NEO Systems. By adding a compatible transceiver unit to your PowerSeries NEO, the system will be able to support PowerG Sensors. Johnson Controls, which you may know as the parent company of DSC, took the technology associated with PowerG Sensors, and brought it over to the Qolsys IQ Panel 2 System. This move was not a major surprise, as Johnson Controls also had partial ownership over Qolsys at the time, and Johnson Controls has since bought out Qolsys entirely.

The addition of PowerG support for the IQ2 marked the beginning of the Qolsys IQ Panel 2 Plus, which is how the system is still marketed and sold today. PowerG support is also available for the DSC Iotega, though that panel has largely flopped due to its lack of local end user programming. Today, the Qolsys IQ Panel 2 Plus represents the most popular panel for supporting PowerG. All versions and variants of the IQ Panel 2 Plus support PowerG Sensors, and their exceptional performance makes them the go-to choice for IQ2+ users who want equipment with the best versatility and protection.

Starting with the range, PowerG Sensors can be used from up to 2,000 feet away from the IQ Panel 2 Plus when they are used in an open air environment. By open air environment, we are talking about a perfect setting with a direct line of sight, and no obstacles between the sensor and the alarm panel. Most homes and businesses do not provide the ideal, "open air" environment, as there are usually walls and metal appliances present. When you see us mention that 2,000 feet open air range, take that with a grain of salt, because in practice, the range is likely a bit less. But still, we can undoubtedly say that PowerG offers arguably the best wireless range in the security industry. Even if its nominal range isn't quite as far as its "open air range", it is still a very powerful signal that can help you overcome the range issues that other sensor lineups may experience. It is great for use in detached garages, barns, multi-building complexes, and even just large industrial buildings.

To make matters even better, there is also a PowerG Repeater, the PG9920. This device will effectively double the range of any PowerG Sensor and help you overcome range limitations caused by thick walls and other obstacles or signal disruptions. The repeater works by taking the signal sent out from any PowerG Sensor and sending it out a second time with just as much power and force as when it was first sent from the original sensor. By strategically placing the repeater, it's theoretically possible to double the useful wireless range of these sensors. That would mean that they can be used from up to 4,000 feet away from the IQ2+ in an open air environment. And if your building is particularly large, you may even have repeaters going away from the IQ Panel 2 Plus System in different directions, including up and down in building stories above or below.

But PowerG Sensors offer more than just an impressive wireless range. They are also known for their exceptional security. This is thanks to their military grade 128-bit AES encryption. To put this as simply as possible, the PowerG Sensor and the panel share a unique encryption key at the time of pairing. The sensor must provide this encryption key to the panel whenever it transmits a signal. Additionally, the panel must then provide a return response with the encryption key as verification in order for the command to go through. In the past, we have referred to this two-way communication process as a "digital handshake". Because of this encrypted pairing process, a PowerG Sensor actively knows whether or not it is currently paired with a panel. You may need to factory default a PowerG Sensor before you can pair it with a new system.

PowerG Sensors also take proactive measures against RF jamming. When a wireless sensor communicates with an alarm panel, it does so at a certain wireless radio frequency (RF). When we talk about RF jamming, we are referring to any malicious technique that prevents wireless signals from reaching their intended destination. This is accomplished by blocking the receiver with a stronger signal at the same wireless frequency as the device that is legitimately trying to communicate with it. When this is done on an alarm system, the system doesn't receive the incoming signals from faulted sensors, and no action is taken during a security breach or an unfavorable environmental condition. Early wireless sensors did not take this into account, and this made RF jamming an effective way to defeat an older wireless system.

The way that PowerG Sensors overcome RF jamming techniques is through a process called Frequency Hopping Spread Spectrum (FHSS). This process involves splitting the RF bandwidth into multiple channels. Each independent channel represents a unique radio frequency for wireless communication to occur. The transmitter (the PowerG Sensor) and the receiver (the alarm panel) both agree on a set of channel hopping sequences that will take place. These sequences are encrypted and time-based for them to occur seamlessly. Since the transmitter and the receiver are both synchronized, they can switch between channels very rapidly. A potential intruder would never be able to re-tun an RF jamming device to keep up. In the case of the PowerG Sensors, the frequency hops occur between 912 MHz and 918 MHz. There are 50 different unique frequency channels that are used, and frequency switches occur 64 times per second. More information on FHSS is available here.

One other benefit of PowerG Sensors that we have never discussed previously is their Adaptive Transmission feature that helps them conserve battery life. This is why you will often see a PowerG Sensor with a very long expected battery life, sometimes more than ten (10) years). Adaptive Transmission involves two-way communication between the PowerG Sensor and the alarm panel. The alarm panel will tell the PowerG Sensor how well its signal is being received. The PowerG Sensor can then adapt its outgoing signal so that it reliably reaches the panel, without expending too much energy. The sensor and the panel regularly exchange this information so that the ideal amount of energy is always used in signal transmissions. This saves battery life in the long run.

We have also found that PowerG Sensors are extremely easy to enroll and they offer the reliable and effective performance that you should expect out of your security system. We wholeheartedly recommend them for use on the Qolsys IQ Panel 2 Plus, as well as any other compatible alarm system. It is expected that the upcoming Qolsys IQ Hub will also be able to utilize PowerG Sensors, so look forward to using PowerG Sensors on that panel once it is available.

For now, if you have any questions about PowerG Sensors or the systems that support them, or if you are interested in signing up for new alarm monitoring service, then please reach out to us by emailing support@alarmgrid.com. We'll be available to check your emails from 9am to 8pm ET M-F. We look forward to hearing from you!

The Alarm Grid Video Team has sure had an interesting past few weeks. It all came to head at the start of last week when they uploaded a backlog of seven (7) new videos. No new videos were uploaded after that, so we're rolling with those 7 for this recap. We hope you like the videos!

But where it gets unusual is the fact that four (4) of the new videos featured myself. I don't usually roll up my sleeves and appear in videos, as I don't have quite the star-power of Jorge or the young lad Jarrett. But I was happy to help out. The four videos I appeared in covered the DSC PG9944 Outdoor Image Sensor, which is a great product for anyone with a Qolsys IQ Panel 2 Plus System.

Don't worry - you will still get to enjoy one (1) new video from Jorge and two (2) new videos from that guy wearing the silly Batman jacket. But in all seriousness, we hope you enjoy the new videos and find them helpful in using your security system. Anyway, no more babbling, let's get on with the video recap for the week of February 3rd!

Tilt Sensor That Is Compatible with the Qolsys IQ Panel 2

Jarrett wears a Batman jacket as he explains which tilt sensors are compatible with the Qolsys IQ Panel 2 System. A tilt sensor is typically used for monitoring a garage door and letting the system know when it is opened or closed. The original Qolsys IQ Panel 2 System uses 319.5 MHz tilt sensors like the Qolsys IQ Tilt-S. If you have an IQ Panel 2 Plus, then you should choose a 319.5 MHz, 345 MHz, or 433 MHz wireless tilt sensor based on the version of the system you have. Unfortunately, there is not yet a PowerG Tilt Sensor.

Honeywell Lyric Alarm System vs Tuxedo Touch Keypad

A nice and polite young man named Jarrett covers the differences between the Honeywell Lyric Alarm System and the Honeywell Tuxedo Touch Touchscreen Keypad. These are two completely different devices with totally different functions. The Lyric is a standalone wireless alarm panel, while the Tuxedo is a keypad for a Honeywell VISTA System. You cannot use the Tuxedo Touch as a keypad for a Lyric System. If you are wanting a dedicated keypad for your Lyric System, then you should check out the Honeywell LKP500.

Communicators That Are Compatible With the Interlogix Simon XTi-5i

Jorge covers the alarm monitoring communicators that are used with the Interlogix Simon XTi-5i Security System. The Simon XTi-5i needs a cellular communicator to work with the Alarm.com platform. There are plenty of communicator options for the Interlogix Simon XTi-5i System. But the most notable ones are those from the Alarm.com XT-511 lineup. These include the Alarm.com XT-511-US-AT (AT&T LTE), the Alarm.com XT-511-US-VZ (Verizon LTE), the Alarm.com XT-511-CA-TL (Telus LTE), the Alarm.com XT-511-US-DP-AT (AT&T LTE & IP), and the Alarm.com XT-511-US-DP-VZ (Verizon LTE & IP)

Does the PG9944 Take Pictures or Videos?

I explain that the DSC PG9944 Outdoor Image Sensor takes pictures, not videos. An image sensor is basically a still-motion camera combined with a motion detection sensor. They are great alternatives to security cameras. When the PG9944 triggers an alarm on the system, it will begin capturing images. Ten (10) images are taken and sent to the panel. If you have an IQ Panel 2 Plus, you can view these 10 images as a stop-motion video. Additionally, the first of these images will be forwarded to Alarm.com for remote viewing. But the PG9944 has no way of capturing video.

Enrolling the DSC PG9944 w/ the Qolsys IQ Panel 2 Plus

I show you how to enroll the DSC PG9944 with the Qolsys IQ Panel 2 Plus. All versions of the Qolsys IQ Panel 2 Plus are capable of supporting PowerG Sensors like the PG9944. The sensor is enrolled by putting the IQ Panel 2 Plus into its enrollment mode and then activating the enrollment function on the sensor to learn it in. The enrollment button can be a little difficult to reach with batteries installed, so you will likely need to use a thin object like a screwdriver to press and hold the button.

Viewing the Images Captured By the PG9944 On the Qolsys IQ Panel 2 Plus

I show you how to view images taken by the PG9944 on the Qolsys IQ Panel 2 Plus. The IQ Panel 2 Plus has a Camera Menu where you can see images taken by the system and any enrolled PowerG Image Sensors. This menu is easily accessed by swiping right or left from the main system screen until you reach the appropriate section. The PG9944 takes ten (10) images when it causes a system alarm, and it sends these images to the IQ Panel 2 Plus for local viewing. The images are viewable as a stop-motion video.

Using the PG9944 Outdoors

I explain how the DSC PG9944 is suitable for use in an outdoor environment. The sensor is able to withstand various environmental conditions that are expected to occur outdoors, including rain, wind, dust, heavy sunlight, and extreme temperatures. However, the PG9944 should not be submerged in water at any time. If you are looking for a PowerG Image Sensor to use exclusively indoors, then you might consider the DSC PG9934P instead. The DSC PG9934P is not suitable for use outdoors, but it is smaller and less expensive than the PG9944.

One excellent way to expand upon a new or existing Qolsys IQ Panel 2 Plus System is with an image sensor module like the DSC PG9944. This is an outdoor PowerG Image Sensor that can pair very nicely with the Alarm.com platform and all versions of the IQ Panel 2 Plus Security System.

If you aren't familiar with image sensors, they are basically motion detection sensors with built-in still motion cameras. When your system goes into alarm, it will take multiple photographs. These photographs are then forwarded to the panel, and then ultimately to an interactive monitoring platform like Alarm.com.

For the DSC PG9944, it starts with it its reliable motion detection. The device features eight (8) internal passive infrared (PIR) sensors, with each using an advanced quad-detection configuration. This helps to ensure that the PG9944 reliably responds to movement, while ignoring potential false alarms. Operating in this manner is crucial for an image sensor device that will typically be used in an outdoor environment.

Being able to use your image sensor in an outdoor setting opens up a world of possibilities for keeping your home safe. Many users will install the PG9944 in a backyard, inside a garage, or even in a barn or shed on the property. These are all locations where you might otherwise have difficulties using standard indoor models. You can expect the PG9944 to work reliably when exposed to rain, dust, heavy sunlight, and extreme temperatures. And the device's IR night vision helps to ensure clear and concise images even during the darkest of nights.

Many Alarm Grid customers will choose to use the DSC PG9944 with the Qolsys IQ Panel 2 Plus Systems. We believe that this is a great alternative to using standard Alarm.com Security Cameras. A great aspect about image sensors is that you do not need a video-monitoring plan to use them. In fact, you can start using image sensors on an Alarm Grid Gold Level Plan (Self or Full), which is the standard level plan to start using Alarm.com. More info can be found on our monitoring page.

When the associated system goes into alarm, the PG9944 responds by taking ten (10) consecutive photos. These ten photos are sent to the IQ Panel 2 Plus for local viewing. These images can be easily viewed from the main screen of the IQ2+ by scrolling left or right until you see the other panel photos. Please note that they may be strung-together to appear as a stop-motion video. But rest assured, they are individual photos, and not a video. You can also take manual photos anytime, even if your system is not experiencing an alarm event.

It is also important to note that the Qolsys IQ Panel 2 Plus will send the first of the ten captured images to the Alarm.com platform for remote viewing. Only the first image is sent, and it will be available within the "Panel Camera Images" section of Alarm.com. Please note that this will only occur if the panel is connected with Alarm.com for monitoring and the "Panel Camera Images" feature is enabled for the Alarm.com account. That setting must be enabled by your monitoring company.

Also note that you will need to have the Panel Camera Alarm Image Uploads feature enabled on your Alarm.com account. You must enable this setting from the customer end of the Alarm.com website. Simply log-in to your Alarm.com account using a web browser, choose the Automation section, and make sure the rule is enabled. You can see an example in the image below.

We recommend using the DSC PG9944 if you require an image sensor for outdoor use. However, if you only need a unit for indoor use, then you might also consider the DSC PG9934P. This is another PowerG Image Sensor module that will offer similar performance to the DSC PG9944. But unlike the PG9944, the PG9934P can only be used indoors. This is a great device to use if you want to be able to see what's going on at home, but you don't necessarily want to pay the extra monitoring costs to use Alarm.com Video Cameras.

Both the DSC PG9944 and the DSC PG9934P are available right now from the Alarm Grid website. We recommend them for anyone looking for new image sensor modules for a Qolsys IQ Panel 2 Plus System. If you have any questions about these sensors or any of these other products on our website, please email us at support@alarmgrid.com. Remember that our support hours run from 9am to 8pm ET M-F. We look forward to hearing from you!