Honeywell IPCAM-WOC1 Posts

Older IPCAM-WIC1, IPCAM-WIC2, IPCAM-WOC1, and IPCAM-WOC2 cameras need an update to keep working with Total Connect 2.0. If you have an affected camera and it hasn't been powered up with a network connection between June 30, 2024 and now, power it on and connect it for at least two (2) days.

You can read the full notice from Resideo here. This notice has been distributed to all Total Connect 2.0 alarm dealers. The gist is this, if you have one of the legacy IPCAM-WI or IPCAM-WO cameras listed, and your camera has been connected to a TC2 system and working for any consecutive two (2) day period between June 30, 2024 and now, you don't need to worry. The update should already be completed.

Any of the above mentioned cameras that don't receive this update will cease to be recognized by the Total Connect 2.0 server beginning on November 1, 2024. Any such camera will no longer receive updates from the server and will cease being supported by Resideo.

You can verify your camera's firmware version by logging into the Total Connect 2.0 app. Go to Cameras. Tap the More icon in the upper right (⋮) of the camera. Tap Settings, then scroll down to Camera Info. The firmware version will be displayed. For IPCAM-WIC1/IPCAM-WIC2 the firmware version should be 2.07. For IPCAM-WOC1/IPCAM-WOC2, the firmware version should be 2.09. Cameras showing these versions have already been updated.

There are three (3) scenarios where one of these legacy cameras may still need to be updated. The first situation won't usually affect DIY users, but the second and third are strong possibilities. We'll discuss each scenario below.

Scenario 1: A Brand New Camera That Has Never Been Installed

This scenario will more than likely only be experienced by an alarm dealer who keeps physical inventory on their premises. Any camera that is new in the box and has never been powered on, connected to internet, and registered with a TC2 account will require some intervention before October 31, 2024. Without this intervention, the camera will cease to be compatible with Total Connect 2.0.

If you're a homeowner with a new security camera that hasn't been activated, you should do so at least two (2) days before October 31, 2024. Failure to activate your camera and give it enough time to receive the update may prevent it from working with any Total Connect 2.0 security system.

Scenario 2: A Previously Used Camera That is Offline and Deleted from TC2

If you have a legacy Total Connect 2.0 camera that hasn't been powered on, connected to the internet, and registered to a TC2 account for at least two (2) consecutive days between June 30, 2024 and now, you need to take action.

To complete the update, power on your camera, connect it to the internet, and register it to your TC2 account. The update will happen automatically once the camera registers. Keep your camera powered on and online for at least two (2) days to ensure the update finishes successfully.

Scenario 3: Previously Registered Camera That Is Offline

If your legacy camera hasn't been online for at least two (2) consecutive days since June 30, 2024, you need to power it on, connect it to the internet, and verify the connection by checking its live view in Total Connect 2.0. Keep your camera connected for at least two days. This will allow the update to complete.

If, after November 1, 2024 you decide to purchase a used IPCAM-WIC1/IPCAM-WIC2 or IPCAM-WOC1/IPCAM-WOC2 make sure that the camera has received this update prior to the purchase. Any of these legacy cameras that have not been updated will be useless as anything other than a unique paper weight.

Frequent readers of our blog may remember from back in late March of this year that the Honeywell IPCAM-WOC1, also called the Lyric OC1, was discontinued without replacement. However, we may soon be reversing that statement, as we have heard that the outdoor camera may soon return!

If you are not familiar with the Honeywell IPCAM-WOC1, it is an outdoor security camera that is used with the Total Connect 2.0 interactive security notification and automation platform. It was quite shocking to us when the camera was discontinued, as it left no outdoor camera available for use with the TC2 platform. Nevertheless, we reported the news, and we even mentioned that it left the door open for a new camera to be revealed at ISC West 2021.

However, Resideo experts have stated that the Honeywell IPCAM-WOC1 was never really discontinued completely, and it was actually just being made temporarily unavailable due to supply issues. Once Resideo resolves the supply issues, the Honeywell IPCAM-WOC1 will supposedly be making a triumphant return. According to insider sources, such a return would not happen until September. It's still a couple months away, but a return might be a reality!

Please understand though, this is just a rumor at this time, albeit one with some very credible sources. We have also heard from our inside sources that it's possible that the Honeywell IPCAM-WOC1 may return as an updated model, with perhaps even a different part number. This would make sense, as the IPCAM-WOC1 was known for being a somewhat quirky device. An update to improve its performance upon return would certainly be appreciated.

We don't have much else to say about a possible return of the Honeywell IPCAM-WOC1. But we absolutely want a marketable and reliable outdoor camera for use with Total Connect 2.0. On that ground, we will be totally thrilled with a resurrection of the IPCAM-WOC1 Camera, especially if it comes as an updated model with more reliable performance. Resideo needs every resource they can get to complete with the Alarm.com Cameras, so this would be a good start.

Of course, we will keep you updated as we learn more about the Honeywell IPCAM-WOC1, so make sure to keep checking our blog for more information. And don't forget to leave a comment down below with your thoughts. We would love to know what you think of the Honeywell IPCAM-WOC1 Outdoor Camera and whether or not you would be interested in buying one if it makes its return. As always, we will return soon with more security news and updates, so make sure to stay posted!

We have a quick tip today for users setting up Notifications on Total Connect 2.0, specifically regarding Notification Triggers for IP cameras. The HD cameras offer a much more diverse selection of Notification Triggers than legacy cameras, which have "Video Events" as their only option.

If you are not familiar with Total Connect 2.0 Text and Email Notifications, then the term "Notification Triggers" is used to identify the action(s) that cause text and/or email alerts to be sent to designated users. In the case of security cameras, you will likely want to be notified if your camera records a video clip. That way, you will know to check out the clip and make sure that everything is alright.

However, the selection of Notification Triggers is much wider if you are working with an HD camera versus and older legacy camera. For an HD camera, you can choose specific types of video captures for notifications, while leaving other types of video captures off the trigger list so that you aren't necessarily notified for every type of camera recording. For instance, you might want to be notified if your camera records a clip for an alarm event or due to detecting motion, but not if your camera begins recording due to sound-based detection.

Note the available selections in the list below. You can pick and choose which of these notifications you want to use with your Total Connect 2.0 HD camera, and which ones you do not. If you choose all eight (8), then it will essentially serve as the greyed out "Video Events" option, which is the only viable option when using legacy cameras.

But as you will notice for legacy cameras, only "Video Events" can be selected as the Notification Trigger. This is pretty much a cover-all option that includes all the individually selectable options that you would have for an HD camera. In other words, if you want to set up Notifications for any legacy cameras, then you will have to make it so that any and all camera activity will trigger a notification. For that reason, it is extra important that you adjust the sensitivity levels for your legacy cameras so that you aren't bombarded by alerts!

For reference, the only HD cameras used with Total Connect 2.0 are the Honeywell IPCAM-WIC1, the Honeywell IPCAM-WIC2, and the discontinued Honeywell IPCAM-WOC1. All other IP cameras used with TC2 are legacy devices. There is hope and speculation that Resideo (formerly Honeywell) will unveil some new HD cameras at upcoming ISC West 2021, but that is a story for another time.

This doesn't mean that if you mix and match legacy and HD cameras on a single TC2 account that you are restricted to "Video Events" for your Notification Triggers. You can create separate sets of notifications as needed so that you have fully customized alerts for your HD cameras, plus the "Video Events" Notifications set up for your legacy cameras.

Don't forget that Total Connect 2.0 allows you to have up to eight (8) HD cameras per account, plus a maximum of six (6) legacy cameras. You may want to refer to this helpful FAQ for more information on Total Connect 2.0 Clip Limits. We know that it can be a bit confusing regarding all the separate rules for HD vs legacy cameras on Total Connect 2.0, so definitely refer to that guide if you need a refresher!

Also, make sure to read our complete guide to setting up Total Connect 2.0 Notifications. That will show you exactly how to create TC2 Notifications the way you want so that you and those around you are properly alerted to events and activity on your security system, which includes any security cameras you have set up. Don't forget to leave a comment down below with your thoughts on Total Connect 2.0 Notifications and Alerts. We're very interested to hear what you have to say. And remember to stay tuned to the Alarm Grid Blog for more security content, news, and tips coming soon!

We're glad to say that Total Connect 2.0 has received a new update for its mobile app on Android and iOS. The new update is Version 6.7.1, and it is a worthwhile upgrade for all who use the TC2 Mobile App. You can download it right now from both the Google Play Store and the Apple App Store.

The biggest inclusion with Total Connect 2.0 Mobile App Version 6.7.1 is a bug fix that lets users pair up to (14) Total Connect IP Cameras with the platform, as Resideo had originally intended. This includes support for up to eight (8) HD Cameras and up to six (6) Legacy Cameras. Although TC2 users have long been promised the ability to use this number of IP cameras with the service, there was previously a bug that prevented users from pairing the full roster of eight (8) HD Cameras. TC2 Mobile App Version 6.7.1 has fixed this issue, and now users should have no issue setting up the maximum number of cameras for a single TC2 account. This news comes not long after we learned that Resideo discontinued their only existing outdoor camera, the Honeywell IPCAM-WOC1. We have not received any official word on the development of a new Resideo Outdoor Camera, but we have heard some rumblings that a new model may hit the market before the end of the year. Of course, we'll pass on any new discussions and/or rumors that we hear to you in the Alarm Grid Blog.

There isn't really much else in terms of new features that come with Total Connect 2.0 Android Version 6.7.1 and Total Connect 2.0 iOS Version 6.7.1. We know that not every Alarm Grid customer with access to Total Connect 2.0 has support for cameras, so this may not exactly be the most exciting update we have seen for TC2. The only Alarm Grid customers who can use Total Connect 2.0 Cameras are those with a Platinum Level Plan or a Video-Only Plan. If you don't fall into one of those categories, then it may be easy to shrug off this update. But still, Resideo also mentions that the Version 6.7.1 Update includes minor user interface (UI) enhancements, as well as improvements in security and stability, not to mention some general bug fixes. This makes the update recommended for all TC2 users who access the platform through the mobile app, including those who don't use cameras.

To download the update for free, check the Google Play Store or the Apple App Store, depending on whether you are an Android or iOS user. Those locations are also where you can download the Total Connect 2.0 Mobile App for free, in case you have been restricting yourself to only using the website. Again, all TC2 users are advised to download the update at their earliest convenience. The improvements in UI, security, and stability make it a worthwhile update for all. If you are an Alarm Grid customer needing help installing the update, or if you are interested in starting a new monitoring subscrition for access to Total Connect 2.0 and Mobile App Version 6.7.1, then please do not hesitate to reach out to us for help by emailing support@alarmgrid.com. Remember that our support hours run from 9am to 8pm ET M-F. And also, why not leave a comment down below sharing your thoughts on the new Total Connect 2.0 Mobile App Update? We would love to hear what you have to say. Remember to keep reading the Alarm Grid Blog for more security system news coming soon!

Update! - We have heard that the Honeywell IPCAM-WOC1 may make a return in the near future! Please see this post for more information.

Alarm Grid has learned that Resideo has discontinued their popular outdoor camera, the Honeywell IPCAM-WOC1. The camera can no longer be purchased from Alarm Grid. This leaves Total Connect 2.0 users with no true option for an outdoor camera. There is no timeline for a replacement model.

The Honeywell IPCAM-WOC1, also known as the Lyric OC1, was best-known for its 1080p recording capability and its ability to withstand the harshness of an outdoor environment. Existing models should still work very well, and you should not encounter any issues when attempting to pair a used model, provided that the camera is not already associated with an existing Total Connect 2.0 account. But unfortunately, the IPCAM-WOC1 is no longer available for purchase, and you are unlikely to find a new model anywhere else. If you do decide to purchase a used model, then just make sure that the camera is no longer associated with an active TC2 account.

It's a bit surprising to see Resideo drop this camera, as it had been their only available outdoor security camera. The closest available device is the Honeywell SkyBell Doorbell Camera, which is great for monitoring the area around a door. But other than that, the only other current Total Connect 2.0 Cameras are the Honeywell IPCAM-WIC1 and the Honeywell IPCAM-WIC2, both of which are for indoor use only.

We have heard a rumor that Resideo is planning to release a new outdoor camera before the end of the year, but we have not heard anything definitive, and no timeline is in place. We hope that is the case, as the sooner a new outdoor camera is available, the better. One option if you are still exploring your choices for an alarm system is to get one that supports Alarm.com, as that platform supports some great outdoor cameras, including the ADC-V723 and the ADC-VC736. Remember that you will need a monitoring plan that supports video surveillance to use those cameras. An Alarm Grid Platinum Plan or an Alarm Grid Video-Only Plan are both viable options.

Have you tried using the IPCAM-WOC1? Are you surprised that Resideo discontinued the camera? What would you like to see in a new outdoor camera from Resideo? Share your thoughts down below in the comments. Maybe we'll write a "wish-list" blog of what we hope Resideo puts into a new outdoor security camera. Stay tuned for more alarm system and security camera news and information from Alarm Grid coming soon!

Today, in this final part of our 2020 holiday buying guides, we will be checking out various accessories for the Honeywell Lyric, the Qolsys IQ Panel 2 Plus, and the 2GIG GC3e. Specifically, we will be looking at compatible cellular communicators, security cameras, keypads, and desk mounts.

Adding various accessories to your system can improve your overall experience and make your system easier to use. Most accessories are optional, though there some that are required for setting up new monitoring service. We'll be sure to discuss these factors along the way. The other very important thing to keep in mind is that compatibility is usually based on system. Check and make sure that any accessory you want works with your system.

Cellular Communicators

We'll start by looking at cellular communicators for our top alarm panels. All of our top security system picks have built-in WIFI for communicating right out of the box. But only the Qolsys IQ Panel 2 Plus comes with a built-in cellular communication module. For the Lyric and the GC3e, you must add a cellular radio if you want one of these systems to use a cellular communication pathway. Keep in mind that this is optional for Total Connect 2.0 Systems like the Lyric, as TC2 allows system to be set up with IP-only service. But for Alarm.com Systems, having an active cellular communication set up is required. This means that you must buy a cellular communicator for a 2GIG GC3e to get it monitored. Keep in mind that using cellular communication on any system will require a monitoring plan that includes cellular service, such as an Alarm Grid Gold or Platinum Level Plan.

A good thing about the cellular communicators listed here is that they are all LTE communicators. The term LTE stands for "long-term evolution", and the associated networks and cell towers are expected to be kept running and in-service for a very long time. This will remain true even as 5G networks are rolled out, as LTE is positioned to serve as a valuable and reliable backup option to 5G. At this time (December 2020), 5G communicators for alarm systems do not yet exist. This makes LTE far and away the best option for cellular communication on alarm systems at this time.

You will notice that there are no cellular communicators listed here for the IQ Panel 2 Plus. This is because the IQ Panel 2 Plus comes with a cellular communicator that is pre-installed. It cannot be removed or replaced. This means that the entire panel must be replaced in the event that its cellular radio fails. You will also see that carrier options for AT&T and Verizon are listed here. You should simply go with whichever carrier provides better service in the area where the system will be used. You can also check coverage maps if you are unsure. Remember, this choice will have no impact on your monthly monitoring costs, and it has nothing to do with the carrier for your personal phone. And just to restate it one last time, this is required for the GC3e, and optional for the Lyric.

Here are our top picks for cellular communicators.

Model	Notes
2GIG LTEA-A-GC3	AT&T LTE Communicator for 2GIG GC3e. Requires system firmware version 3.2.3 or higher.
2GIG LTEV1-A-GC3	Verizon LTE Communicator for 2GIG GC3e. Requires system firmware 3.1.3 or higher.
Honeywell LYRICLTE-A	AT&T LTE Communicator for Honeywell Lyric. Requires system firmware version MR3 or higher.
Honeywell LYRICLTE-V	Verizon LTE Communicator for Honeywell Lyric. Requires system firmware version MR9 or higher.

Security Cameras

Next, we will be taking a look at various security camera options for your system. Broadly speaking, these devices can be split into two (2) categories. There are security cameras for Alarm.com and security cameras for Total Connect 2.0. If you are building around a Qolsys IQ Panel 2 Plus or 2GIG GC3e, then you will want to get Alarm.com Security Cameras. But if you are building around the Honeywell Lyric, then you should get Total Connect 2.0 cameras. Remember that using any camera will require a monitoring plan that includes video surveillance, such as an Alarm Grid Platinum Level Plan. The only exception is for a SkyBell Video Doorbell, which we will be discussing later.

The cameras listed here are all IP cameras, meaning that they connect to the internet for remote access. You can use the Alarm.com Mobile App or the Total Connect 2.0 Mobile App to get a live look-in for your camera from pretty much anywhere in the world. Most cameras connect across wireless WIFI, but some use wired ethernet connectivity. For those using wired ethernet, you will often see them listed as Power over Ethernet, or PoE. This means that the camera can get both power and network connectivity from the same connection. Cameras that use WIFI will typically just have a plug-in transformer for power.

Let's start by exploring the Alarm.com Cameras. These are what you want if you are building around an IQ Panel 2 Plus, a 2GIG GC3e, or any other Alarm.com Security System.

Model	Notes
Alarm.com ADC-V522IR	Alarm.com Indoor 1080p camera. 113° Field of View. IR Night Vision range of 15 feet. Uses WIFI or ethernet connectivity, but does not support PoE.
Alarm.com ADC-V523	Alarm.com Indoor 1080p camera w/ High Dynamic Range. 117° Field of View. IR Night Vision Range of 15 feet. Uses WIFI or ethernet connectivity, but does not support PoE.
Alarm.com ADC-V622- WELL	Alarm.com Indoor Wellness Camera w/ 1080p recording. 180° Field of View. IR Night Vision Rang of 15 feet. Uses WIFI or ethernet connectivity. Supports PoE if ethernet is used. Doubles as Bluetooth speaker for two-way audio.
Alarm.com ADC-V723	Alarm.com Outdoor 1080p camera w/ High Dynamic Range. 117° Field of View. IR Night Vision Range of 40 feet. Uses WIFI connectivity. Does not support wired ethernet.
Alarm.com ADC-VC726	Alarm.com Commercial outdoor mini bullet 1080p camera. 86° Field of View. IR Night Vision Range of 95 feet. Uses wired ethernet connectivity. Supports PoE.
Alarm.com ADC-VC736	Alarm.com Commercial outdoor large bullet 1080p camera. 86° Field of View. IR Night Vision Range of 260 feet. Uses wired ethernet connectivity. Supports PoE.
Alarm.com ADC-VC826	Alarm.com Commercial outdoor dome 1080p camera. 108° Field of View. IR Night Vision Range of 95 feet. Uses wired ethernet connectivity. Supports PoE.
Alarm.com ADC-VC836	Alarm.com Commercial outdoor turret 1080p camera. 108° Field of View. IR Night Vision Range of 95 feet. Uses wired ethernet connectivity. Supports PoE.
Alarm.com ADC-VDB770	Alarm.com Video Doorbell 1080p Camera. 150° Vertical Field of View. 115° Horizontal Field of View. IR Night Vision Range of 15 feet. Uses WIFI connectivity. Does not support wired ethernet.
Alarm.com ADC-SVR122	Alarm.com Stream Video Recorder. Used to facilitate 24-hour continuous recording. Supports up to 2TB of storage w/ proper hard drives. Not an actual camera.
Alarm.com ADC-CSVR126	Alarm.com Commercial Stream Video Recorder. Used to facilitate 24-hour continuous recording. Supports up to 16TB of storage w/ proper hard drives. Not an actual camera.

Next, we will be looking at the Total Connect IP Cameras. There are only thee (3) models available, but they are the ones to use if you have a Honeywell Lyric set up with the Total Connect 2.0 platform.

Model	Notes
Honeywell IPCAM-WIC1	Total Connect 2.0 Indoor 720p Camera. 135° Field of View. IR Night Vision Range of 16.5 feet.
Honeywell IPCAM-WIC2	Total Connect 2.0 Indoor 1080p Camera. 110° Field of View. IR Night Vision Range of 33 Feet.
Honeywell IPCAM-WOC1	Total Connect 2.0 Outdoor 1080p Camera. 117° Field of View. IR Night Vision Range of 65 Feet. Does not record audio.

Lastly, we want to give special recognition to the SkyBell Doorbell Cameras. These camera replace your existing doorbell, and you can receive push notifications on your phone when someone rings your doorbell. They can also begin recording upon detecting movement, making them ideal for monitoring the front of your home. What's also unique about these cameras is they do not require true video monitoring service. Up to five (5) can be added on a TC2 account, while those with ADC can only use one (1), unless they upgrade to a true video monitoring plan. Make sure to use one designed for TC2 or ADC depending on the interactive platform you are using. Please note that only the TC2 version can be used with the native SkyBell App. You cannot use the SkyBell App with the ADC models.

Model	Notes
Honeywell SkyBell DBCAM-TRIM	SkyBell Slimline Video Doorbell Camera for use w/ Total Connect 2.0 and SkyBell App. Up to 1080p recording quality. Uses WIFI connectivity. Available in Satin Nickel or Oil Rubbed Bronze.
Alarm.com ADC-VDB101	SkyBell Round Video Doorbell Camera for use w/ Alarm.com. Up to 1080p recording quality. Uses WIFI connectivity. Available in Satin Nickel or Oil Rubbed Bronze.
Alarm.com ADC-VDB105	SkyBell Slimline Video Doorbell Camera for use w/ Alarm.com. Up to 720p recording quality. Uses WIFI connectivity. Available in Satin Nickel or Oil Rubbed Bronze.

Alarm Keypads

Our next topic concerns alarm keypads. These devices serve as a secondary on-site controller for your system. Some of these are very basic devices that are only useful for minimal system arming and disarming and showing status. Others offer complete touchscreen displays and allow you to perform a robust selection of security and automation commands. The important thing to pay attention to here is compatibility. Each keypad listed here will only work with the system that it is intended to be used with.

Some common locations for secondary alarm system keypads are near back doors or garage doors, as a user might want to arm and disarm from those locations as they are coming and going, without needing to go all the way to their primary alarm panel. They are also popular for use in master bedrooms, as having a keypad by your bedside can be a convenient way to call for help in the event that you hear someone breaking into your home.

Here are the available keypads for our top system picks.

Model	Notes
Honeywell LKP500	LCD Keypad for Honeywell Lyric. Used for basic arming and disarming. Provides two lines of character display, with 16 characters per line. 32 characters total. Supports chime. Honeywell LKP500-DK Desk Stand is also available.
2GIG PAD1-345	Push-button Keypad for 2GIG Systems, including the 2GIG GC3e. Used for basic arming and disarming. Can also be used to trigger a panic during an emergency. No display screen. No chime or voice.
2GIG SP1-GC3	Touchscreen Keypad for 2GIG GC3e. Supports full suite of security and arming functions. Pairs w/ GC3e across WIFI or using a local Access Point (AP). Offers chime and voice. Mimics screen of GC3e once paired.
Qolsys IQ Remote	Touchscreen Keypad for Qolsys IQ Panel 2 Plus. Supports full suite of security and automation functions. Pairs with IQ2+ across WIFI. Mimics screen of IQ2+ once paired.

Desk Mounts

Our final category is desk mounts for alarm panels. Using a desk mount allows you to position your panel upright on a sturdy desk or table, instead of wall-mounting or just laying it flat. These devices are often preferred by DIY users who don't want to drill holes in the wall. They are also great for renters who have restrictions on drilling holes.

Of our top security system picks, only the Qolsys IQ Panel 2 Plus comes with a desk mount included. However, the included desk mount is relatively small and flimsy. There is actually a more robust desk mount for the IQ Panel 2 Plus, which is included on this list. Using a proper desk mount makes it possible to perform a complete system installation with nothing more than a screwdriver in many cases.

Here are desk mounts for our top security system picks.

Model	Notes
Honeywell LCP500-DK	Desk mount for Honeywell Lyric. Allows for positioning at 30° or 60°.
2GIG CP-DESK	Desk mount for 2GIG GC3e. Also compatible with other 2GIG Wireless Alarm Panels.
Qolsys IQ Stand	Desk mount for Qolsys IQ Panel 2 Plus. Sturdier option than the standard table stand that comes included with the system.

Reach out to us!

This concludes our final buying guide for the 2020 holiday season. Make sure to check out our earlier buying guides on alarm panels, security sensors, environmental sensors, smart home automation, and our special guide for the Honeywell Home PROA7PLUS Panel. If you have any questions regarding compatibility, or if you are interested in starting new alarm monitoring service and you need help planning your system, please email our team at support@alarmgrid.com. We will help you every step of the way, from ordering the right equipment, to activating your alarm monitoring service. Our team is available to help from 9am to 8pm ET M-F. As always, we look forward to hearing from you!

Resideo has made an exciting new addition to Total Connect 2.0, as users can now live-stream their Total Connect 2.0 HD Cameras from the TC2 website. Previously, this was only possible from the Total Connect 2.0 Mobile App. This is a super convenient way to look-in at your home or business!

All of the HD Cameras for TC2 can be streamed in this way. This includes the 720P Honeywell IPCAM-WIC1, the 1080P Honeywell IPCAM-WIC2, and the 1080P Outdoor Honeywell IPCAM-WOC1. The sample picture above shows the IPCAM-WIC2, and we gotta say that the image quality looks fantastic!

To access the camera streaming feature from the TC2 website, simply log-in to your Total Connect 2.0 from a web browser, then choose Cameras on the left-hand side. Find the camera you want to stream, and then click the play icon in the center of the preview you image. The live-stream should begin after connecting to the camera. Two-way audio is also supported if your camera supports the feature.

One thing that particularly impressed us is just how little of a delay there was between the camera and Total Connect 2.0. This delay is only 1 or 2 seconds at most. I actually had to get one of our support technicians to help me take the picture above so that I could give the camera a nice thumbs-up!

If you are interested in adding video surveillance to your existing Alarm Grid account, or if you are interested in signing-up for new monitoring service, please email our support team at support@alarmgrid.com. We will be happy to help you explore your options so that you can make an informed purchasing decision. Our hours for checking email run from 9am to 8pm ET M-F. We look forward to hearing from you!

With Father's Day right around the corner (Sunday, June 21st), we thought it'd be a good time to suggest some security and automation gifts to surprise the dad in your life. You don't need to get your dad another neck-tie this year. We've got some neat gifts that dad is sure to love!

The Gift of Security!

If dad doesn't have a security system yet, then he's really missing out. You can have peace of mind in knowing that his home is safe while he's out doing dad stuff like golfing, fishing, or going to a bbq. Maybe your dad thinks he doesn't need security? Well, you could remind him of a big fat insurance discount that he could get by getting his home monitored. That will excite him even more than a weekend trip to the hardware store.

We have lots of great panels available, though the most popular right now are the Honeywell Lyric and the Qolsys IQ Panel 2 Plus. These are both wireless panels that are very easy to set up, even for the dad who doesn't know his way around a tool-kit. You won't hear any swear words coming out of the work shed when dad goes to set up his new system. And he'll probably want to show it off to all the neighbors.

Shopping on a Budget?

Okay, totally understand if you're strapped for cash and can't drop a few hundred dollars on a brand-new security system. But just because you're looking to spend $30 rather than $300 doesn't mean you can't make dad smile. If your dad already has a system, then why not get him a new sensor or two? Door and window contacts are always affordable. Just get a model that works with dad's security system. The VERSA-2GIG and the VERSA-GE are both extremely popular, and they won't break the bank!

Maybe you've already surprised dad with a contact sensor before? You could always check out some motion sensors. These are great for knowing if someone is snooping around the basement or the garage. Again, you want to make sure you get a model compatible with dad's system. Popular options include the Honeywell SiXPIR, the 2GIG PIR1-345, and the DSC PG9914. And if you aren't sure which models will work with your dad's system, just reach out to us, and we'll be happy to help!

Automation Excitement!

If dad already has a wireless system, then chances are that it doubles as an automation controller. You can surprise dad with some new Z-Wave automation devices for him to pair with his system. Lighting devices are always a great choice. Your dad will be able to turn the lights ON and OFF without getting up, and he can create smart scenes for automatic control. And a great thing about smart lights - they don't break the bank!

Your dad might like an in-wall switch as a nice weekend installation project. Some of our favorite in-wall switches include the GE 14318 and the Resideo Z5SWITCH. Or if your dad is not into wiring, you can get him a plug-in lamp module like the GE 28170 or the Resideo Z5DIMPID. And the great thing about these Z-Wave devices is that they are universally compatible and will work with any system that operates as a Z-Wave controller!

Maybe the smart lighting game has already been introduced to dad's house? In that case, you could make his day with a different automation device like a Z-Wave thermostat. Our favorites right now are the Honeywell T6 PRO and the Alarm.com ADC-T3000. Or if you really want to get your dad something a little more unique, then you could try a smart water valve like the Alarm.com ADC-SWV100. This can be very useful in preventing dad from experiencing the headache of a flooded basement or laundry room.

Help Dad Keep an Eye on the Neighbors

We all know that dads like to know what's going on outside. That is why we'd be foolish not to recommend some outdoor security cameras. These devices are actually easy to install, and they can give your dad a good look at the front lawn while he's tucked away in his man cave. You'll want to consider whether his system supports Alarm.com or Total Connect 2.0. For ADC, we like the Alarm.com ADC-V723. If dad has TC2, then go with the Honeywell IPCAM-WOC1.

Maybe dad isn't ready to upgrade to video monitoring quite yet? Don't worry! He can still make sure the neighbor kids stay off the lawn with a different type of camera. One popular option is to use a SkyBell Video Doorbell. These can be used without needing to upgrade to a full-on video monitoring plan. There are models for Total Connect 2.0, and others for Alarm.com. Another possibility is to look into the Arlo Cameras that do not use monitoring service through ADC or TC2.

The Best Gift of All!

We've saved the best gift idea for last. It isn't something you can hold in your hand, but it's something that every dad will love, even if they have all the security gadgets under the sun. That is the gift of alarm monitoring service! Why not offer to cover dad's monitoring bill for the next year? That is truly the gift that keeps on giving. Talk it over with dad, and when you're ready, the two of you can contact us to make the arrangements. We'll charge your card every month, with no added fees or sudden surprises. Meanwhile, your dad will be able to spend his money on other important things like new golf clubs or something. Oh dads....

If you haven't already, make sure to check out our monitoring page. This will teach you about the different plans offered from Alarm Grid so that you can choose the perfect one for your dad's needs. Once you're ready, shoot us an email at support@alarmgrid.com or call us at (888) 818-7728 to set things up. Remember that our business hours run from 9am to 8pm ET M-F. Our team will be thrilled to help you give your dad the gift of home security! We look forward to hearing from you!

Alarm Grid has received reports that some users have been getting excessive and unnecessary notifications regarding Total Connect 2.0 HD Cameras. The issue appears to have been the fault of the AlarmNet Servers, and it is nothing to worry about. It appears to have since been resolved.

According to reports, the issue only affected Total Connect 2.0 HD Cameras, including the Honeywell IPCAM-WIC1, the Honeywell IPCAM-WIC2, and the Honeywell IPCAM-WOC1. None of the Total Connect 2.0 Legacy Cameras were affected. The issue caused many users to receive random text and email notifications simply stating that their cameras were "online". Most users reported that the notifications came through starting around 1pm ET yesterday and later stopped occurring shortly after midnight ET.

From what we can tell, Resideo has since corrected the issue, and no further problems should occur. If you find that you are still receiving unnecessary status notifications from Total Connect 2.0, please let us know by emailing support@alarmgrid.com. Our support team will respond to incoming emails from 9am to 8pm ET M-F. We will make sure to document any issues and pass on any problems or errors to the Resideo AlarmNet team.

Update: We have received official word from Resideo that they were experiencing technical issues last night. This resulted in issues, including random and repeated online/offline messages, failure to stream cameras, and the failure to register new devices. Resideo says that the vast majority of the issues have been resolved, though there are still a small number of false "camera offline" events.

2nd Update: Resideo has since confirmed that the issue has been fixed.

3rd Update: Resideo confirmed that the issue re-appeared Thursday April 23rd and Friday April 24th. The issue has since been resolved.

Looking for an easy way to improve upon your security system? Adding security cameras and integrating them with your existing setup will really let you unlock your system's full potential. You can have your cameras activate and begin recording as soon as activity occurs on your system.

The main thing you should consider when choosing cameras for an existing system is to think about which alarm panel you have. Your alarm panel, by extension, determines which interactive service platform you use. Most Alarm Grid monitored customers use either Total Connect 2.0 or Alarm.com. If you have a Honeywell Security System, then you most likely use Total Connect 2.0. If you have Alarm Grid monitoring service using a panel from a different manufacturer, such as Qolsys, 2GIG, or DSC, then you most likely use Alarm.com.

Both Total Connect 2.0 and Alarm.com have their own selection of cameras to choose from. Total Connect 2.0 keeps things simple with just three (3) cameras to choose from as of April 2020. These cameras are the Honeywell IPCAM-WIC1, the Honeywell IPCAM-WIC2, and the Honeywell IPCAM-WOC1. Alarm.com seems to release updated models more frequently, as they continue to update their camera lineup. At this time some of our favorite Alarm.com Camera Models include the Alarm.com ADC-V522IR, the Alarm.com ADC-V622-WELL, and the Alarm.com ADC-V723.

Once you know which camera lineup to choose from, there are many factors for you to consider when deciding which camera to buy. Some of these factors include whether the camera is for indoor or outdoor use, the recording quality of the camera, the camera's viewing angle, and how much money you would like to spend. Since Honeywell only has three cameras currently on the market, it's usually pretty cut and dry which one is best for your needs. With Alarm.com, there are more options to consider.

Whether you are using TC2 or ADC, you can view the live feed for your camera remotely from anywhere in the world using an app on your phone. You can also set a camera to begin recording, whenever activity occurs on your system. For example, if someone faults an Entry/Exit Zone and triggers an Entry Delay countdown, then you can have your camera record all the action. Usually, it will just the routine activity of an authorized individual arming the system, but you will be ready if anyone tries to make an unauthorized entry into your home or business. And you can set your cameras for all sorts of triggers, included faulted sensors, system alarms, at certain times of day, and more.

Remember that you will need a monitoring plan that includes video surveillance to use security cameras. If you already have a monitored system with Alarm Grid, then the easiest option is to upgrade to a Platinum Level Plan (Self or Full). To learn more, or if you have any questions about security cameras or our monitoring services, please email us at support@alarmgrid.com. We check our support emails from Monday thru Friday, 9am to 8pm ET. We look forward to hearing from you!