Preparing For The Eventual Lyric End-of-Life - Part 2
Posted By Julia RossI began with the intention of making a single post about possible replacement options for the Lyric. But the post grew out of control and took on a life of its own! So instead, I'm making a series of posts, one for each suggestion. In Part 2, we'll concentrate on the Resideo PRO Series panels.
The Lyric was discontinued in 2021 and production of all SiX Series sensors has now ended. With that in mind, I've been looking at the various ways forward for current Lyric users. In Part 1 we explored the option of simply continuing to use the Lyric Alarm. In Part 2, we'll discuss replacing the Lyric with a like-panel. In this case, the Resideo PROA7C or PROA7PLUSC.
Feature Comparison FAQs:
Replace the Lyric With Another All-In-One System:
If you choose to replace the Lyric panel, using another all-in-one system is a great idea. The Honeywell Home PROA7, Resideo PROA7C and PROA7PLUSC panels are a natural choice. The PROA7, PROA7C and PROA7PLUSC can support nearly all the same sensors as the Lyric, though there are some exceptions as we discuss in this FAQ.
NOTE: The Honeywell Home PROA7 and the Resideo PROA7C are virtually the same panel with a different manufacturer's badge on the front. The Honeywell Home PROA7PLUS and the Resideo PROA7PLUSC are also virtually the same. In early 2025, Resideo announced they would discontinue the PROA7PLUS and begin only manufacturing the PROA7PLUSC.
Between the two panels, the PROA7PLUSC is the most like the Lyric in terms of features. For example, the Lyric has a front-facing camera as does the PROA7PLUSC. The PROA7C has no camera. The PROA7PLUSC comes with both WIFI and Z-Wave support included, the PROA7C doesn't, though you can add those features. You can see a full feature comparison between the PROA7C and the PROA7PLUSC here.
The PROA7C and PROA7PLUSC both support PROSIX and SiX Series sensors right out of the box. When a SiX Series sensor is added to either of the PRO Series panels the sensor is updated, effectively becoming a PROSIX sensor. Once this upgrade occurs, the SiX Series device cannot be downgraded again. That means it can never work with a Lyric panel after the upgrade takes place.
Another important thing to remember is that every SiX and PROSIX sensor can only be paired to one panel at a time. When replacing a Lyric system with a PRO Series panel, a specific set of steps should be completed, and in the proper order. You can read the steps for replacing a Lyric with a PRO Series panel here.
You'll need to work closely with your alarm dealer to complete a replacement steps linked above as only your alarm dealer can perform certain steps in the list. There is no direct replacement option through AlarmNet360 currently, as there is when going from one Lyric panel to another Lyric panel. You will be reprogramming all your zones when performing this replacement.
As previously mentioned, SiX Series devices are paired with the Lyric panel during programming. To disassociate a sensor for use with another panel, either the individual zone must be deleted while the sensor is powered on and can receive the delete command, or the entire panel must be defaulted with all SiX sensors powered and receptive to the default signal.
In the event of a Lyric panel failure with multiple paired SiX Series devices, sending the delete or default command may become impossible. Consequently, not only would the Lyric panel require replacement, but all paired SiX Sensors would also need to be replaced, as they would be unresponsive to pairing with a new panel. For this reason, it is better to replace the Lyric panel before a failure occurs.
Honeywell 5800 Series Support:
The PROA7C and PROA7PLUSC don't offer native 5800 Series support. To support 5800 Series devices a Honeywell Home PROTAKEOVER module must be added. With a PROTAKEOVER the system can support any one (1) legacy RF frequency from the following:
- Honeywell 5800 Series - 345 MHz
- 2GIG Unencrypted Sensors - 345 MHz
- Qolsys/Interlogix Unencrypted - 319.5 MHz
- DSC Legacy (not PowerG) - 433 MHz
- Bosch - 433 MHz
In spite of the fact that several of the above mentioned manufacturers use the same basic frequency for legacy wireless, none of these are interchangeable. That means you can only support 2GIG or Honeywell 5800 Series, not both. We have tested this and this is a definite limitation. Incidentally, the FF345 behaves as a Honeywell 5800 Series device rather than a 2GIG one. The same rule holds true for DSC and Bosch 433 MHz sensors.
Communicators:
A key advantage of Resideo and First Alert panels is their versatile communication options, offering IP, LTE cellular (AT&T or Verizon), or dual-path connectivity. However, it's important to point out that IP-only communication leaves the system vulnerable to network outages. LTE cellular communication is much more reliable, though it is slightly more expensive when choosing a monthly monitoring plan.
Despite the reliability of LTE cellular communication, Alarm Grid still recommends a connection to WIFI. This is due in part to the fact that PRO Series panels can only receive over-the-air firmware updates via WIFI. Updates will not be sent using cellular data. If you have a panel in a location with no WIFI available, you can use your cell phone as a wireless hotspot. The panel will see this as a WIFI connection and should be able to download any available update.
Apple HomeKit Support:
If your Lyric is using Apple HomeKit you will be able to continue using it with the Resideo PROA7PLUSC. Unfortunately, the Resideo PROA7C does not support HomeKit. Also, once you have the PROA7PLUSC configured, you'll need to go through the process of setting up HomeKit with the new PROA7PLUSC from scratch. There is a bit of difference in using the PROA7PLUSC with HomeKit, you can read about that here.
HomeKit is a great way to automate you lifestyle-enhancement devices and integrate them with your alarm system, or vise versa. However, there are limitations to the security and life-safety devices you can monitor with it. For example, Apple HomeKit doesn't provide detailed notifications for fire or carbon monoxide alarms. You can read a comparison between HomeKit and Total Connect 2.0 here. Because of these differences, we still recommend that HomeKit users also use TC2.
Total Connect 2.0:
Switching from the Lyric to a PRO Series panel enables continued or new access to Total Connect 2.0. This remote platform mirrors panel functionality, allowing you to monitor status, arm/disarm, control automation, and program scene-based automation schedules and system event triggers.
Be sure to check out Part 1 and Part 3 in this series on Preparing For the Eventual Lyric End-of-Life. In Part 1, we discuss the considerations when continuing to use the Lyric. In Part 3 we discuss replacing the Lyric with a new VISTAH3 Hybrid panel.
