Honeywell 5800C2W Posts

A great way to build out your Honeywell Lyric is with Honeywell 5800 Sensors. These are simple, 345 MHz wireless sensors that you can easily enroll with the system for security, life-safety, and environmental monitoring. They are perfect for expanding your system and making it more robust.

When you want to pair a Honeywell 5800 Sensor with the Lyric, the process is very straightforward. Put the Lyric in its auto-enrollment mode by choosing Security > Tools > enter Installer Code (default 4112) > Program > Zones > Add New > Serial Number. Make sure the RF Type on the right-hand side is set to 5800. Then activate the sensor either by faulting it or triggering its cover tamper switch. The Lyric should beep to confirm that it received a signal transmission. Then activate the sensor a second time to have the Lyric display the Serial Number. The third activation will confirm the Serial Number and return you to the screen where you can configure the zone settings.

Programming the zone settings for the sensor is actually quite simple. Depending on how you enrolled the sensor, you may need to adjust the Loop Number. This is almost always the case if you enrolled the sensor by activating its tamper switch. Refer to the instruction manual for the 5800 Sensor to determine which Loop Number to use.

The two (2) Zone Descriptors and the Device Type serve as the name for the sensor. You should choose a name that will help you identify the sensor, e.g. "Front Bedroom Motion Sensor", "South Hallway Door", etc. The Response Type determines how the system responds when the sensor is faulted. See our list of Lyric Response Types for more info.

Alarm Report should be set to Yes if you want the system to report out through AlarmNet to a Central Station if the zone causes an alarm on the system. That is an essential component of alarm monitoring services. Chime is optional, and it has the panel emit any one of several available sounds when the zone is faulted. Supervision tells the panel to look for an RF check-in signal from the sensor periodically to ensure that it is online. Click Save in the bottom-right after you finish adjusting the settings.

Keep in mind that only uni-directional (one-way) sensors from the Honeywell 5800 Series can be used with the Lyric. This leaves out bi-directional devices like the Honeywell 5800WAVE Siren, the Honeywell 5828 Keypad, and the Honeywell 5800RL Relay Module, so make sure you do not buy those for the Lyric. But you still have a lot of excellent sensors and security devices to choose from.

Below is a list of the Honeywell 5800 Sensors that you can use with the Honeywell Lyric:

Sensor Name	Notes
Honeywell 5800MINI	Door/Window sensor. Uses Loop 1.
Honeywell 5800PIR-RES	PIR motion sensor. Uses Loop 1. Coverage Area: 35' x 40'
Honeywell 5816	Door and window sensor. Loop 1 = Terminal Block for NC Contact Loop 2 = Reed Switch
Honeywell 5811	Door and window sensor. Uses Loop 1.
Honeywell 5800C2W	9-zone wired to wireless converter. Allows hardwired sensors to communicate with the Lyric as wireless devices. All zones use Loop 1 and a unique Serial Number ID.
Honeywell 5800CO	Carbon monoxide sensor. Loop 1 = CO Detection Loop 2 = End of Sensor Life (separate programming only required on TURBO and other V-Plex panels)
Honeywell 5800COMBO	Combination, smoke, heat, CO, and low-temperature sensor. Uses up to five (5) zones on the Lyric Panel. Has two (2) Serial Numbers for enrollment purposes. Loop 1, SN 1 = Smoke/Heat Detection Loop 2, SN 1 = Smoke/Heat Maintenance Loop 3, SN 1 = Low Temperature Detection Loop 1, SN 2 = CO Detection Loop 2, SN 2 = End of Sensor Life (separate programming required only on TURBO and other V-Plex panels)
Honeywell 5800FLOOD	Flood and temperature sensor. Loop 1 = Low Temperature Detection Loop 2 = High Temperature Detection Loop 3 = Flood Detection
Honeywell 5800MICRA	Recessed window sensor. Uses Loop 1.
Honeywell 5800PIR	PIR motion sensor. Loop 1 = Low Sensitivity Motion. Loop 2 = High Sensitivity Motion. Loop 3 = Low Temperature Detection Coverage Area: 35' x 40'
Honeywell 5800PIR-COM	Commercial PIR motion sensor. Loop 1 = Low Sensitivity Motion Loop 2 = High Sensitivity Motion Loop 3 = Low Temperature Detection Coverage Area: 60' x 80'
Honeywell 5800PIR-OD	Outdoor PIR motion sensor. Uses Loop 1.
Honeywell 5800PIR-OD2	Outdoor PIR motion sensor. Uses Loop 1.
Honeywell 5800RP	Wireless repeater for Honeywell 5800 Sensors. Does not require enrollment, but can be assigned a single zone for RF supervision, low-battery, AC loss, and RF jam detection. This is done using Serial Number 1 with Loop 1, with DIP Switch 2 set in the OFF position. Can also use up to four (4) separate zones for supervision when DIP Switch 2 is set to ON. This is required for UL installations.
Honeywell 5800RPS	Recessed door/window sensor. Uses Loop 1.
Honeywell 5800SS1	Shock sensor. Uses Loop 1.
Honeywell 5802MN	Medical alert button. Uses Loop 1.
Honeywell 5802MN2	Medical alert button. Uses Loop 1.
Honeywell 5802WXT	Panic button. Uses Loop 1.
Honeywell 5802WXT-2	Panic button. Uses Loop 1.
Honeywell 5806W3	Smoke detector. Uses Loop 1.
Honeywell 5808W3	Smoke and heat detector. Loop 1 = Smoke & Heat Detection Loop 3 = Low Temperature Detection
Honeywell 5809	Fixed temperature and rate-of-rise heat detector. Uses Loop 1. Alarm occurs when the temperature exceeds 135 degrees Fahrenheit, or when the temperature rises more than 15 degrees Fahrenheit per minute.
Honeywell 5809FXT	Fixed temperature heat detector. Uses Loop 1. Alarm occurs when the temperature exceeds 135 degrees Fahrenheit.
Honeywell 5809SS	Fixed temperature and rate-of-rise heat detector. Uses Loop 1. Alarm occurs at 135 degrees Fahrenheit or when the temperature rises more than 15 degrees Fahrenheit per minute.
Honeywell 5814	Door and window sensor. Uses Loop 1.
Honeywell 5815	Door and window sensor. Loop 1 = Terminal Block for NC Contact Loop 2 = Reed Switch
Honeywell 5816MN	Door and window sensor. Loop 1 = Terminal Block for NC Contact Loop 2 = Reed Switches
Honeywell 5816OD	Outdoor door and window sensor. Loop 1 = Terminal Block for NC Contact Loop 2 = Reed Switch
Honeywell 5817	Three (3) zone door and window sensor & transmitter. Loop 1 = NC or NO (DIP Switch Selectable) unsupervised. It does not use an End of Line Resistor (EOLR) Loop 2, 3 = NC Only. Both are unsupervised with no EOLR used
Honeywell 5817CBXT	Three (3) zone commercial transmitter. Loop 1 = Two (2) Terminals; Primary Loop supervised by 470k Ohm (yellow, purple, yellow, gold) EOLR. Resistor must ALWAYS be installed, even if Loop 1 is not programmed. If Loop 1 is used as a burglary zone, then Loop 4 must be programmed as a separate zone for Cover Tamper protection. Loop 2 = NC Reed Switch Loop 3 = Two (2) Terminals; NC Loop unsupervised, no EOLR required
Honeywell 5817XT	Three (3) zone door and window sensor & transmitter. Loop 1 = NC or NO (DIP Switch Selectable) unsupervised with no EOLR required Loop 2, 3 = Two (2) Terminal Blocks, NC Only
Honeywell 5818MNL	Recessed door and window sensor. Uses Loop 1. Not suitable for use in metal doors
Honeywell 5819	Three (3) zone shock processor. Loop 1 = NC for Inertia Style External Shock Sensor. This input provides a suitable fast loop response of from 1ms to 20ms, based on dip switch setting Loop 2 = Reed Switch Loop 3 = NC for Wired Contact, unsupervised with no EOLR required
Honeywell 5819S	Shock sensor and contact sensor. Loop 1 = Built-in Inertia Style Shock Sensor Loop 2 = Reed Switch Loop 3 = NC for Wired Contact
Honeywell 5819WHS	Three (3) zone shock processor. Loop 1 = NC, Built-in Inertia Style Shock Sensor Loop 2 = Reed Switch Loop 3 = NC for Wired Contact
Honeywell 5820L	Slimline door and window sensor. Uses Loop 1.
Honeywell 5822T	Garage tilt sensor. Loop 1 = NC for Wired Contact, unsupervised, no EOLR used Loop 3 = Tilt Switch
Honeywell 5834-2	Two (2) button key fob. Dual-button inputs allowed. Uses three (3) loops total, for a possible three (3) inputs. Can only be used with the Lyric in Low-Security Mode (Green LED)
Honeywell 5834-4	Four (4) button key fob. Dual-button inputs allowed. Uses two (2) Serial Numbers, which both use Loops 1, 2, 3, 4. Up to eight (8) inputs possible. Can only be used with the Lyric in Low-Security Mode (Green LED)
Honeywell 5834-4EN	Four (4) button key fob. Dual-button inputs allowed. Uses two (2) Serial Numbers, which both use Loops 1, 2, 3, 4. Up to eight (8) inputs possible. Can only be used with the Lyric in Low-Security Mode (Green LED)
Honeywell 5853	Glass break sensor. Uses Loop 1.
Honeywell 5869	Commercial panic switch. Uses Loop 1. Latches when tripped, key (provided) needed to reset it after it is tripped
Honeywell 5878	Six (6) button key fob. Uses two (2) Serial Numbers, which both use Loops 1, 2, 3, 4. Up to eight (8) inputs possible.
Honeywell 5898	Dual-tec motion sensor. Loop 1 = Low Sensitivity Motion Sensor. Pet immunity is available for this loop. 50lb or 100lb pet immunity, selectable via DIP Switch 1 Loop 2 = High Sensitivity Motion Sensor. Loop 3 = Temperature Sensor (High or Low, DIP Switch Selectable)

Anyone looking to bring existing hardwired sensors to a new 345 MHz wireless system will be delighted to learn that we have reduced the price of the Honeywell 5800C2W Wired to Wireless Converter to just $49.99. Now is the perfect time to buy this awesome wired to wireless converter module!

If you aren't familiar with the Honeywell 5800C2W or wired to wireless converters in general, then allow us to give you a quick lesson. A wired to wireless converter essentially replaces a hardwired alarm panel so that you can bring existing wired sensors over to a wireless system. Typically, a wired to wireless converter module will be installed in the previous location of the wired panel. All of the existing wired sensors will connect with this module. The wired to wireless converter can then transmit wireless signals to the new wireless panel on the behalf of these sensors. The wireless system will then recognize the wired sensors as wireless sensors.

In the case of the Honeywell 5800C2W, the module transmits signals at 345 MHz. This makes it compatible with any system that supports the 345 MHz wireless frequency. Systems that support this frequency include the Honeywell Lyric Controller, the 2GIG GC3e, and the Qolsys IQ Panel 2 Plus with 345 MHz Daughtercard, among others. If you aren't sure whether or not your system supports 345 MHz signals, then you can always contact us for help.

Please note that while the Honeywell 5800C2W comes with its own transformer, you must provide your own cabling to make the connection. If you ever need to buy a new standalone transformer for your Honeywell 5800C2W, you can purchase one from us. The 5800C2W AC Transformer is sold under the part name Honeywell 300-07052. You will also need to provide your own backup battery to keep the 5800C2W running during an electrical outage. The UltraTech 1240 Battery is perfect for this task. The 5800C2W comes with a battery harness included for completing the connection.

Each wired sensor used with the 5800C2W will require its own wireless zone on the wireless panel. These zones are configured individually, so you will need to enroll each sensor one by one. The 5800C2W can support up to nine (9) zones. If you have additional hardwired sensors beyond that, then you will need additional 5800C2W units. You can use as many Honeywell 5800C2W modules as you need, as long as you do not exceed the total number of wireless zones on your panel. Please note that the 5800C2W does not support Zone Doubling. Additionally, life-safety sensors like smoke detectors and carbon monoxide sensors cannot be used with the Honeywell 5800C2W.

The Honeywell 5800C2W is now available from Alarm Grid for just $49.99. We are also excited to announce that our Honeywell 5800C2WPK Wired to Wireless Kit has also been reduced in price, and it is now available for just $65.99. Our Honeywell 5800C2WPK Kit includes a brand-new 5800C2W Converter, a power transformer, a Honeywell LT-Cable for connecting the transformer, an UltraTech 1240 Battery, and a battery harness for connecting the battery. And if you are looking to get started with a new system as well, you might consider our Honeywell LYRICC2WPK Kit. This system kit includes everything in the 5800C2WPK Kit, plus a brand-new Honeywell Lyric Controller and an additional LT-Cable for powering the panel. This is a truly amazing bundle that provides an excellent way to upgrade the old and outdated wired system in your home or business to a state-of-the-art wireless system that is an absolute joy to use.

If you have any questions about the Honeywell 5800C2W or any of our aforementioned kits, please reach out to us by emailing support@alarmgrid.com. Remember that our support hours run from 9am to 8pm ET M-F. And if you haven't signed up for monitoring service from Alarm Grid yet, make sure to check out our monitoring page to learn more. We look forward to hearing from you!

Update: We have also reduced the cost of our certified refurbished Honeywell 5800C2W to just $39.99. If you want to learn more about our certified refurbished Honeywell products, please check this prior blog post.

Hi DIYers! Did you know that Alarm Grid offers certified refurbished versions of some of the most popular Honeywell Security Systems and accessories? Our refurbished offerings work just as well as any new equipment. Going this route can be a great option for cutting overall system costs.

All of our certified refurbished equipment is sent to us directly from the manufacturer, Honeywell. It starts when the previous owner of an eligible piece of Honeywell equipment sends the product back to Honeywell for one reason or another. Honeywell will clean up the equipment, restore any defects and basically ensure that it works good as new. With Honeywell's strict oversight, the refurbished equipment is guaranteed to function exactly the same as any new equipment. We then purchase this equipment from Honeywell. Any customer who buys this equipment will have it professionally sent to them from the Alarm Grid headquarters.

In the highly unlikely event that the refurbished equipment does not function as it should, Alarm Grid offers a warranty protection in conjunction with the original warranty Honeywell put on the product. The original warranty will depend upon the manufacture date of the equipment. We will honor any remaining warranty from Honeywell that is left on the equipment, or we will offer our own warranty of up to 90 days, whichever is longer. While we are very confident in all of the refurbished equipment we offer, we fully understand that some customers will want some protective measures put in place before buying this type of equipment.

At this time, our refurbished lineup is restricted to four Honeywell products. However, we may decide to expand this lineup sometime in the future. Our team will make sure to let you know if any new refurbished products become available. The following products are currently available as certified refurbished versions:

• Certified Refurbished Honeywell Lyric Security System
• Certified Refurbished Honeywell LKP500 Lyric Wireless Keypad
• Certified Refurbished Honeywell VISTA-21iP Control Panel
• Certified Refurbished Honeywell 5800C2W Wired to Wireless Converter

If you have any questions about our refurbished products, please do not hesitate to reach out to us! You may email us at any time at support@alarmgrid.com. You may also call us during normal business hours, which are 9am to 8pm EST Monday thru Friday.