DSC PG9862 Posts

Update 09/18/23: Qolsys has released this firmware as of today. Alarm.com, however, has not yet made it available for dealers to perform remote OTA updates. They usually lag behind Qolsys by a few days, as they perform their own testing. Instructions for updating using a patch tag can be found here. The full Qolsys TSB can be found here.

Original Blog Post:

We've been hearing about it for a while, and Firmware 4.4.0 will be available any day now. In this post, we'll go through some of the big additions, fixes, and improvements that you can expect to see in this release. From support for PowerG automation devices to the addition of Night arming.

This is one of the most ambitious updates for Qolsys that we've seen. There are a lot of new features in this update. There are also some important fixes and improvements included. In this post, we'll go through what we believe are some of the more important changes coming up in Firmware 4.4.0.

New Features:

• Support for All New PowerG Automation Devices:
  • IQ Lock-PG
  • IQ Dimmer-PG
  • IQ Switch-PG
  • IQ Smart Socket-PG
  • IQ Smart Plug-PG
  • IQ Outdoor Plug-PG
• Added a new Automation Icon within the Installation > Devices Menu. This icon is where you will now go to add everything except Z-Wave Automation devices. However, from within this screen, you can reach Z-Wave Automation (if you navigate here in error). In the future, we expect all Automation will be programmed from within this screen.
• Added "Night Arming" mode. The panel can now be armed in "Away", "Stay", or "Night".
• Created a new PIN code setting for users of the IQ WIFI 6. This will restrict access to the profiles and network map settings of the router.
• Added support for Aeotec Indoor Siren 6.
• Added Sensor Group 11 (Day Zone) and Group 21 (Night Motion).
• Added Sensor Groups 61 (Fixed Intrusion Panic) & 62 (Fixed Silent Panic). With these settings, hardwired, latching panics can now send restore signals when they are physically restored.
• Allows exterior PowerG motions to be programmed as Door/Window sensors to expand the Sensor Group options when programming.
• Added the option to display ambient temperature on the IQ Panel 4 and IQ4 Hub screen when used with PowerG and PowerG Plus devices that support reporting ambient temperature (listed below).
  
  
  • PG9312
  • PG9309
  • PG9200AX
  • PG9350SL
  • PG9914
  • PG9862
  • PG9872
  • PG9984P
  • PG9922
  • PG9936
  • PG9933
  • PG9905
  • PGP9945E
  • PGP9922
  • PGP9920
• PowerG Smoke Detectors can now sound different cadences for Intrusion, Fire, and CO alarms when the "PowerG Smoke Detector Siren" option is used for additional sounders.

Before going on to Fixes and Improvements, I wanted to pause for a moment and expand a bit on a couple of the things listed above. With the new Sensor Group 11 (Day Zone) here is the description of operation for that zone type: Intended for a Door or Window zone that triggers an alarm instantly if the system is armed (same as Group 13). When the panel is disarmed, the zone will annunciate Opens AND Closes, and will continue to notify until the Dismiss button is pressed on the panel screen.

When it comes to Night Arming, an understanding of the Groups associated with motion detectors is essential. Below is an explanation of how each Sensor Group operates. All of these Groups are supervised.

• Group 17, Away-Instant Motion: Active only when armed to "Night" or "Away". Trips instantly when motion is detected. Does not trip if an E/E zone is tripped first.
• Group 15, Stay-Instant Motion: Active in "Stay," "Night," and "Away". Trips Instantly when motion is detected. Does not trip if an E/E zone is tripped first.
• Group 35, Stay-Delay Motion: Active in "Stay," "Night," and "Away" modes. Triggers an Entry Delay if motion is faulted. Does not trip if an E/E zone is tripped first.
• Group 20, Away-Delay Motion: Active when armed to "Night" and "Away". Triggers an Entry Delay if triggered first. Does not trip if an E/E zone is triggered first.
• Group 21, Night Motion (New): Active only when armed to "Away" and trips instantly when motion is detected by this sensor first. Does not trip if an E/E zone is tripped first.
• Group 25, Safety Motion: This sensor does not report or trigger an alarm. This is a "Chime-Only" sensor when "Activity Monitoring" is active, regardless of panel armed status. Used for medicine cabinets, storage, activity tracking, etc.

Panel Fixes and Improvements:

• Changed the Z-Wave naming convention for Settings related to Automation.
• Added support for Z-Wave Weiser/Kwikset Lock supervision requests.
• Made improvements to text size and movement in Photo Frame Screensaver.
• Enhanced the downloading of images and videos from the IQ Panel to a mobile device.
• Added a 30-second arming delay for the IQ Panel 4's built-in glass break detector.
• Fixed an issue with pairing the ADC S2000-T Temp Sensor to the panel.

IQ Remote PowerG Fixes and Improvements:

• Added the ability for the IQ Remote PowerG to automatically power back on after an extended power failure/battery drain, once primary power is restored.
• Corrected an issue where "Nighttime Mode" was not working properly on the IQ Remote PowerG.
• Changed the functionality of the Power Button on the IQ Remote PowerG. Power Down/Reboot now requires a 10-second button press.
• Added support for Thermostats and Garage Door Control to the IQ Remote PowerG.
• Added "Weather Clock" to the IQ Remote PowerG Frame Options.
• Weather to the IQ Remote PowerG now functions when paired in both PowerG and WIFI modes.
• Added support to IQ Remote PowerG for "Installer Test Mode" where the siren is temporarily silenced during testing.
• Added support to the IQ Remote PowerG for Doorbell Notification pop-up and chime, when paired over both PowerG and WIFI.
• IQ Remote PowerG enrolled over PowerG will now automatically upgrade upon first enrollment, rather than waiting 24 hours.
• General communication improvements (Sync/Delay).

Update Instructions:

This firmware is now available, so you can perform the update. Your panel must be on Firmware Version 4.3.0+ before upgrading to 4.4.0. To check your firmware version, tap the gray bar at the top of the panel's home screen, then press Settings > Advanced Settings > Enter Installer or Dealer Code (1111 or 2222 respectively) then tap About > Software.

If your panel is on Firmware Version 4.0.0, 4.0.1, or 4.1.0, you must first update to 4.1.1.

From there, you can update to 4.2.0 or 4.2.1. Then you can update to 4.3.0 and finally to 4.4.0. This is very important! Failure to follow the proper update steps could cause your panel to become unresponsive.

Now that 4.4.0 has been released you can follow the steps below to update from 4.3.0 to 4.4.0:

1. Swipe down from the top of the panel screen and tap "Settings."
2. In "Settings" tap "Advanced Settings."
3. Enter Installer or Dealer Code (default is 1111 or 2222 respectively.)
4. Tap "Upgrade Software."
5. Tap "Patchtag" then enter iqpanel4.4.0 and then tap "Ok."
6. Tap "Upgrade Using Network," making sure the panel is connected to WIFI. Without a WIFI connection, the upgrade will not go through.

The patch will now be downloaded and then installed. It is important not to touch the panel screen during this process. You'll see a progress bar while the download is in progress, then the panel will reboot. This is normal. Once the panel boots up to the usual security screen, the upgrade is complete. The update usually takes approximately five (5) minutes to complete.

If you prefer, the update can eventually be pushed by your alarm dealer through the Alarm.com dealer portal. If your panel is on an older version, they should also be able to send any prerequisite updates to your panel prior to sending 4.4.0. Just be sure the panel has a connection to WIFI as even updates that are sent through Alarm.com require a WIFI connection at the panel.

You have likely heard us talking about the benefits of PowerG Sensors at one point or another. Today, we figured we would break down the benefits of these sensors and explain why we like them so much. Let's take an in-depth look at PowerG Sensors and all of their wonderful benefits.

PowerG Sensors were originally designed for the hardwired DSC PowerSeries NEO Systems. By adding a compatible transceiver unit to your PowerSeries NEO, the system will be able to support PowerG Sensors. Johnson Controls, which you may know as the parent company of DSC, took the technology associated with PowerG Sensors, and brought it over to the Qolsys IQ Panel 2 System. This move was not a major surprise, as Johnson Controls also had partial ownership over Qolsys at the time, and Johnson Controls has since bought out Qolsys entirely.

The addition of PowerG support for the IQ2 marked the beginning of the Qolsys IQ Panel 2 Plus, which is how the system is still marketed and sold today. PowerG support is also available for the DSC Iotega, though that panel has largely flopped due to its lack of local end user programming. Today, the Qolsys IQ Panel 2 Plus represents the most popular panel for supporting PowerG. All versions and variants of the IQ Panel 2 Plus support PowerG Sensors, and their exceptional performance makes them the go-to choice for IQ2+ users who want equipment with the best versatility and protection.

Starting with the range, PowerG Sensors can be used from up to 2,000 feet away from the IQ Panel 2 Plus when they are used in an open air environment. By open air environment, we are talking about a perfect setting with a direct line of sight, and no obstacles between the sensor and the alarm panel. Most homes and businesses do not provide the ideal, "open air" environment, as there are usually walls and metal appliances present. When you see us mention that 2,000 feet open air range, take that with a grain of salt, because in practice, the range is likely a bit less. But still, we can undoubtedly say that PowerG offers arguably the best wireless range in the security industry. Even if its nominal range isn't quite as far as its "open air range", it is still a very powerful signal that can help you overcome the range issues that other sensor lineups may experience. It is great for use in detached garages, barns, multi-building complexes, and even just large industrial buildings.

To make matters even better, there is also a PowerG Repeater, the PG9920. This device will effectively double the range of any PowerG Sensor and help you overcome range limitations caused by thick walls and other obstacles or signal disruptions. The repeater works by taking the signal sent out from any PowerG Sensor and sending it out a second time with just as much power and force as when it was first sent from the original sensor. By strategically placing the repeater, it's theoretically possible to double the useful wireless range of these sensors. That would mean that they can be used from up to 4,000 feet away from the IQ2+ in an open air environment. And if your building is particularly large, you may even have repeaters going away from the IQ Panel 2 Plus System in different directions, including up and down in building stories above or below.

But PowerG Sensors offer more than just an impressive wireless range. They are also known for their exceptional security. This is thanks to their military grade 128-bit AES encryption. To put this as simply as possible, the PowerG Sensor and the panel share a unique encryption key at the time of pairing. The sensor must provide this encryption key to the panel whenever it transmits a signal. Additionally, the panel must then provide a return response with the encryption key as verification in order for the command to go through. In the past, we have referred to this two-way communication process as a "digital handshake". Because of this encrypted pairing process, a PowerG Sensor actively knows whether or not it is currently paired with a panel. You may need to factory default a PowerG Sensor before you can pair it with a new system.

PowerG Sensors also take proactive measures against RF jamming. When a wireless sensor communicates with an alarm panel, it does so at a certain wireless radio frequency (RF). When we talk about RF jamming, we are referring to any malicious technique that prevents wireless signals from reaching their intended destination. This is accomplished by blocking the receiver with a stronger signal at the same wireless frequency as the device that is legitimately trying to communicate with it. When this is done on an alarm system, the system doesn't receive the incoming signals from faulted sensors, and no action is taken during a security breach or an unfavorable environmental condition. Early wireless sensors did not take this into account, and this made RF jamming an effective way to defeat an older wireless system.

The way that PowerG Sensors overcome RF jamming techniques is through a process called Frequency Hopping Spread Spectrum (FHSS). This process involves splitting the RF bandwidth into multiple channels. Each independent channel represents a unique radio frequency for wireless communication to occur. The transmitter (the PowerG Sensor) and the receiver (the alarm panel) both agree on a set of channel hopping sequences that will take place. These sequences are encrypted and time-based for them to occur seamlessly. Since the transmitter and the receiver are both synchronized, they can switch between channels very rapidly. A potential intruder would never be able to re-tun an RF jamming device to keep up. In the case of the PowerG Sensors, the frequency hops occur between 912 MHz and 918 MHz. There are 50 different unique frequency channels that are used, and frequency switches occur 64 times per second. More information on FHSS is available here.

One other benefit of PowerG Sensors that we have never discussed previously is their Adaptive Transmission feature that helps them conserve battery life. This is why you will often see a PowerG Sensor with a very long expected battery life, sometimes more than ten (10) years). Adaptive Transmission involves two-way communication between the PowerG Sensor and the alarm panel. The alarm panel will tell the PowerG Sensor how well its signal is being received. The PowerG Sensor can then adapt its outgoing signal so that it reliably reaches the panel, without expending too much energy. The sensor and the panel regularly exchange this information so that the ideal amount of energy is always used in signal transmissions. This saves battery life in the long run.

We have also found that PowerG Sensors are extremely easy to enroll and they offer the reliable and effective performance that you should expect out of your security system. We wholeheartedly recommend them for use on the Qolsys IQ Panel 2 Plus, as well as any other compatible alarm system. It is expected that the upcoming Qolsys IQ Hub will also be able to utilize PowerG Sensors, so look forward to using PowerG Sensors on that panel once it is available.

For now, if you have any questions about PowerG Sensors or the systems that support them, or if you are interested in signing up for new alarm monitoring service, then please reach out to us by emailing support@alarmgrid.com. We'll be available to check your emails from 9am to 8pm ET M-F. We look forward to hearing from you!

We are sometimes asked by users with PowerG Systems if using PowerG Motion Detection Sensors is the best option. And the answer to that question is usually yes. There are some rare occasions where choosing a legacy RF motion detection sensor is preferable, but this is usually not the case.

PowerG Motion Sensors are known for their incredible wireless range (up to 2 km from certain system), 128-bit AES encryption and frequency hopping spread spectrum for wireless security, and ability to be easily programmed. They are known for being some of the best sensors in the entire industry. Compatible systems for PowerG Motion Sensors include all versions of the Qolsys IQ Panel 2 Plus, the DSC Iotega, and any DSC PowerSeries NEO with an added wireless transceiver.

As this time, the following PowerG Motion Detection Sensors are sold by Alarm Grid:

• DSC PG9902 Outdoor Curtain PIR Motion Sensor
• DSC PG9914 PIR Motion Sensor
• DSC PG9924 Curtain PIR Motion Sensor
• DSC PG9974P Mirror Optics PIR Motion Sensor
• DSC PG9984P Dual-Tech Motion Sensor
• DSC PG9994 Outdoor PIR Motion Sensor

Of these devices, the DSC PG9914 is by far the most popular. This is considered the "standard" PowerG Motion Sensor, while the others are used in more specific and unique situations. However, they all offer the great features of PowerG. Assuming that you are just looking for a standard motion sensor for indoor use, the DSC PG9914 is almost always the best option. If you are wondering if you should get a PowerG Motion Sensor, the answer is usually yes.

Keep in mind that if you have a DSC Iotega or a DSC PowerSeries NEO with an added transceiver that PowerG Motion Sensors are the only wireless motion sensors that you can use. The DSC PowerSeries NEO can use hardwired motion sensors, which opens up a whole new world of different possibilities. But for this discussion, we will assume that the user is only considering wireless motion sensors. We will also assume that the user is just looking for a standard motion sensor. We won't dive into the more unique motion sensors such as curtain motion sensors, outdoor motion sensors, or dual-tech motion sensors.

With all things considered the DSC PG9914 is almost always the best motion sensor to use with a PowerG System, assuming that the user is just looking for a basic motion sensor for indoor use. There are a couple of exceptions that may apply if the user has a Qolsys IQ Panel 2 Plus. And we will discuss those exceptions in a moment. But for all intents and purposes, going with a PowerG Motion Sensor if your system supports PowerG Sensors is almost always recommended.

If you have a 319.5 MHz Qolsys IQ Panel 2 Plus, then you may consider the Qolsys QS1231-840 IQ Motion-S. The advantage to this motion sensor is that it has a lower price point than the DSC PG9914. However, that is the only real advantage the IQ Motion-S offers. The DSC PG9914 offers a much further wireless range, and its 128-bit AES encryption is more secure than the rolling code "S-Line" offered from the IQ Motion-S. But if communication range and wireless security are not important to you, then you might want the IQ Motion-S instead. Of the PowerG Systems, it only works with the 319.5 MHz IQ Panel 2 Plus.

For users of the 345 MHZ Qolsys IQ Panel 2 Plus, the Honeywell 5800PIR-COM is sometimes preferred over the PG9914. The Honeywell 5800PIR-COM has a coverage range of 60 feet by 80 feet, which is much larger than the 39-foot coverage area of the PG9914. If coverage range is considered the most important factor, then the Honeywell 5800PIR-COM might be the best option. But keep in mind that the Honeywell 5800PIR-COM has a much shorter wireless communication range (200 feet nominal), and it offers no wireless encryption protection. Also consider that the Honeywell 5800PIR-COM offers no pet immunity, while the DSC PG9914 offers pet immunity for small animals weighing up to 85 pounds. Remember, the Honeywell 5800PIR-COM will only work with the 345 MHz version of the IQ Panel 2 Plus.

If you need extra help choosing a motion detector for your system or if you want to learn more about any of our products or monitoring services, please reach out to us by emailing support@alarmgrid.com. We will be happy to answer any questions you may have. Remember that our support hours run from 9am to 8pm ET M-F. We look forward to hearing from you!