November 2020 Archives

In an act of deja vu, next year's ISC West is being pushed back from its scheduled dates in March to new dates in July. The group in charge of organizing ISC West, Reed Exhibitions, says that the decision was made based on the current state of the ongoing global COVID-19 pandemic.

ISC West 2021 was originally scheduled for March 23 - 26. With this postponement, it will now occur July 19 - 21. The event will still be held at the Venetian Resort and Sands Expo and Convention Center in Las Vegas, NV. A unique aspect of the 2021 edition of the event is that it will occur in a hybrid format, with both in-person and virtual conference passes being available. Extra measures are being taken to ensure the health and safety of those involved.

Reed Exhibitions and the Security Industry Association (SIA) released a statement that reads, "We’re pleased to have a plan in place to produce ISC West in 2021, and after a long respite, the ISC and SIA teams look forward to welcoming our customers back to Las Vegas for strong education, demos, product announcements, awards ceremonies, networking opportunities, special events, and more."

This isn't the first time the tradeshow was postponed from March to July. The event for last year, ISC 2020, was originally set for March 18 - 20, before being rescheduled to July 20 - 22. It was later postponed a second time to October, before finally being cancelled entirely. There was an entirely virtual event held in its place. Unfortunately, we found the virtual event to be pretty lackluster, and we didn't obtain any useful announcements to post on our blog.

We really hope that the in-person ISC West conference happens this year. It is always a nice event for meeting key industry insiders and checking out some of the latest technology and upcoming products. It just doesn't transition easily to a virtual event, especially as security equipment manufacturers aren't likely to save their big surprises and unveilings for an event where people can't actually see the fruits of their labor in person. Although Las Vegas is hot in the summer, we'll take a summertime ISC West in the desert over no ISC West at all!

If you have any questions about ISC West, or if you are interested in learning more about monitoring service from Alarm Grid, please email us at support@alarmgrid.com. We're here to check email from 9am to 8pm ET M-F. We look forward to hearing from you!

Our video team had a decent time last week, as five (5) new videos were released. This time, the videos feature myself and Jarrett. As always, we hope that you find them to be helpful, informative, and interesting. Remember, we make these videos to help you! Let's check out the videos.

Finding the Date Code On the FF345

I show you how to find the date code on the Encore FF345. The FF345 is a listening module for smoke detectors and CO detectors that alerts the system upon hearing the unique sound of an activated smoke detector or carbon monoxide sensor. The device is designed to be used with 2GIG Panels and Honeywell Panels. However, FF345 units from a certain batch had an error that prevented them from working with Honeywell Systems. Checking the date code is useful for determining if your unit is affected.

Cameras that Work w/ the Lyric and Total Connect

Jarrett explains which security cameras are compatible with the Honeywell Lyric and the Total Connect 2.0 platform. The only cameras that can work with TC2 are Honeywell IP Cameras. Of these cameras, only the legacy models that are no longer sold are able to interface with the Lyric for live-streaming on the panel. None of the current Honeywell HD Cameras can be streamed on the Lyric. One important note about the legacy IP cameras from Honeywell is that they had to be online to receive a critical firmware update to continue being used to this day.

The Lyric Built-In Camera Disarm Pictures Cannot be Used With HomeKit

Jarrett explains how the disarm photos that are taken using the front camera on the Honeywell Lyric will not appear on the Apple HomeKit platform. While there is a nice integration between the Lyric and HomeKit, it is only used for automation purposes and a very limited selection of security functions. Disarm photos are considered to be a security function, and they will not appear in HomeKit. The only platform that allows you to view disarm photos taken by the Lyric is Total Connect 2.0.

Night Stay On Qolsys IQ Panel 2 Plus

I explain how there is no Night Stay option for a Qolsys IQ Panel 2 Plus. Night Stay is a special type of Arm Stay. Normally, when you Arm Stay, interior zones are automatically bypassed. But when you Night Stay, motion sensors that are designated for Arm Night will remain active, instead of being bypassed. The feature is available on most Honeywell Panels, but it is not supported on the IQ2+. But there is an okay workaround for the IQ2+ that involves using specific Sensor Groups for programmed motion sensors that you want to remain active when Arming Stay.

Number of Zones On a Hardwired System Cannot be Increased

I explain why the number of zones on a hardwired alarm panel cannot be increased. The maximum number of zones that a system can support is built into its logic, and it cannot be increased. For a wired panel, only the on-board zones are initially accessible. You will need to add one or more wired expansion modules and/or a wireless receiver to open up the other zones. This will allow sensors to connect with the zones and interface with the system.

If you are a Honeywell VISTA System user, then you have likely heard about the Honeywell Home Tuxedo Keypad. The Tuxedo serves as a touchscreen keypad controller, and also as a Z-Wave Plus hub. But one limitation for the unit is that it cannot be configured as a secondary Z-Wave controller.

Setting up a hub as a secondary Z-Wave controller involves pairing it with a separate Z-Wave hub, which will serve as the primary. When you do this, all Z-Wave devices paired with the primary controller will be automatically pushed over to the secondary, as long as they are compatible. These devices will also remain on the primary controller, meaning that you can operate them from both hubs.

If you decide to use this type of setup, it is advised that you clear all Z-Wave devices enrolled with the secondary controller, and instead enroll them with the primary controller beforehand. Then perform the process of setting up the secondary controller to the primary. This will ensure that all of the Z-Wave devices you want to use are available on both controllers.

Remember, Z-Wave devices paired with the secondary controller will not be pushed over to the primary. When you get a new Z-Wave device, you must enroll it at the primary Z-Wave controller, not the secondary. In most cases, Honeywell Z-Wave Hubs are used as secondary controllers, and Z-Wave devices paired directly with the primary controller are then shared with the Honeywell Z-Wave Controller. One of the most common primary Z-Wave hubs to use for this type of setup is Samsung SmartThings. Other popular third party Z-Wave hubs should work just as well.

Being able to set up a Z-Wave hub as a secondary controller, is technically one of the more advanced Z-Wave functions that you would ever try to perform on a smart home automation network. But while it is quite advanced, it is also very standard. It is somewhat unusual to encounter a Z-Wave automation controller with no primary and secondary configuration options. But that's exactly the case with the Honeywell Home Tuxedo. You can't set it as a secondary Z-Wave controller, which is a big letdown for anyone who wants to use the device in conjunction with a different Z-Wave hub, such as Samsung SmartThings.

According to Resideo, the ability to set the Tuxedo as a secondary Z-Wave controller will come from a future firmware update. At this time, we do not have any estimate for when such a firmware update would be made available. If you want to learn more about firmware updates for a Tuxedo Keypad, please refer to this FAQ.

However, we can speculate that once the feature is available, you will be able to configure Tuxedo primary/secondary options by starting from the main keypad screen, and choosing the Devices option, followed by the Z-Wave Setup button at the bottom of the screen, and then selecting More in the lower-right corner. If you do that now, you will notice that the "Learn Mode" option currently does not exist.

Remember to stay tuned to our blog for future updates on the Honeywell Home Tuxedo. We will be sure to let you know about any new features made available for the keypad. If you have any questions about the Tuxedo or Z-Wave home automation, please feel free to email us at support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

Alarm Grid is proud to offer the Honeywell Lyric LCP500-L24 with 24-Hour Backup Battery. This deal comes with the same great Honeywell Lyric Alarm System that is loved by thousands of Alarm Grid monitored customers, plus an extended LCP500-24B Battery for longer runtime during power outages.

Like most security systems, the Lyric uses a backup battery to stay running when the system experiences AC power loss. This can occur during electrical outages, or when the system's plug-in transformer has been disconnected. Traditionally, the Lyric System comes with a standard 4-hour battery called the Honeywell LCP500-4B.

But with our special Honeywell LCP500-L24 deal, you can get a Lyric System that includes the Honeywell LCP500-24B 24-Hour Backup Battery. This bundled deal is less expensive than buying the Lyric System and the LCP500-24B separately a la carte, so taking advantage of this offer is strongly advised. The battery is advertised to keep the Lyric Alarm Panel and its connected accessories running for at least 24 hours during power outages.

Normally, the Lyric comes with the 4-hour LCP500-4B Battery pre-installed. When you order the Honeywell Lyric LCP500-L24 Deal, your Lyric System will arrive with no battery installed. The 24-hour LCP500-24B Battery will be included in the package separately. You will need to open up the Lyric Panel and connect the battery during setup. We recommend doing this prior to powering on the system using its included plug-in transformer. For more information on powering the Honeywell Lyric, please see this FAQ.

In addition to powering the Lyric, the LCP500-24B will also keep any connected system accessories running. Most notably, this includes the system's communicator that is used for monitoring service. The Lyric has a built-in WIFI card for connecting to the internet, and you can also add a cellular communicator to provide an additional communication pathway for the system. This is important because an internet outage, which often accompanies a power outage, would otherwise take your system offline, even if the panel itself remains powered on with its battery backup during this time.

Available cellular communicator options for the Honeywell Lyric include the Honeywell LYRICLTE-A AT&T LTE Communicator and the Honeywell LYIRICLTE-V Verizon LTE Communicator. Alarm Grid also sells the Honeywell LYRICUPGRADE-A and the Honeywell LYRICUPGRADE-V bundles that include the Lyric System and one of the aforementioned cellular communicators. Keep in mind that our Lyric LTE bundles only come with the standard 4-hour battery, so you must buy the Honeywell LCP500-24B Battery separately if you want to provide an extended backup power option for your Lyric. Remember that you will need a monitoring plan that includes cellular service in order to use a cellular communicator with your Lyric System. Examples of monitoring plans that include cellular service are the Alarm Grid Gold Level Plans, the Alarm Grid Platinum Level Plans, and the Alarm Grid Cell-Only Plan. More information on all our monitoring plans can be found here.

The Honeywell Lyric is one of the top security systems on the market today. We love the Lyric and its 7-inch touchscreen display, support for 128 wireless zones, local end user programming, built-in Z-Wave, Apple HomeKit compatibility, and its ability to interface with the Total Connect 2.0 platform for controlling the system remotely though a mobile app or web browser. This is truly a state-of-the-art alarm system, and it gets even better with its extended 24-hour backup battery to stay running when it matters most.

If you want to learn more about Lyric, or if you are interested in starting alarm monitoring service, please email us at support@alarmgrid.com. We will review your message at our earliest convenience and reply back as soon as possible. Our team checks emails during our usual business hours of 9am to 8pm ET M-F. We look forward to hearing from you soon!

Security system users in Panama City, FL may soon have to think about alarm registration and newly enforced fines for false alarms. Reports indicate that city council members approved the first reading of a new ordinance, with a second ordinance reading set to follow sometime soon.

Concerned citizens and officials in Panama City, FL are considering a new city ordinance that would allow the city to fine businesses and residents who intentionally or unintentionally cause false burglary/intrusion alarms and/or false fire alarms. The purpose of such a new ordinance would be to make first responders more readily available and to cut down on a high rate of false alarms.

Vice Mayor of Panama City, FL Geoff McConnell said of false alarms, "This is a huge drain on resources that could be better spent responding to emergency calls... We don’t want to spend money on chasing these false alarms when the public isn’t going to benefit from the safety of them.”

According to McConnell, more than 11,000 total false alarms are reported in the city each year. That reported figure comes from combined reports from the Panama City Beach Police Department and Panama City Beach Fire Rescue. McConnell went on to state that most of the city's false alarms are from repeat offenders. The majority of these repeat offenders are neglectful businesses with faulty alarm systems.

The ordinance being considered would not only enact fines for false alarm offenders, it would also make registration of alarm systems mandatory. In particular, alarm system owners, monitoring companies like Alarm Grid, and central stations, such as Alarm Grid's central station partner CMS, would be required to register with the city. Officials state that while the majority of alarm calls end up being false, responders are trained to respond to all calls with the same seriousness every single time.

Alarm Grid understands the frustration experienced by Panama City, FL officials. But we urge the city to take a step back and not enact a new drastic policy that would only make it more difficult for law-abiding citizens to get alarm systems. We think it's perfectly reasonable to require alarm systems to be registered, and it's also fair to fine users who repeatedly cause false alarms.

We hope that any registration fees for installing and maintaining security systems are kept to a minimum. Such fees make it more challenging for innocent end users to install alarm systems, and they are ultimately detrimental to alarm businesses. If the city decides that a registry of alarm systems will help prevent false alarms, then just please keep registration fees to a minimum. We understand that some small fees are necessary for maintaining the registry in the first place. But excessive fees will only deter everyday users from installing systems. We have found that low, reasonable fees, such as those in Pompano Beach, FL, tend to work best.

And if the city decides to fine users who cause false alarms, we hope that is also done within reason. One possibility is to give a warning for the first false alarm on a registered system, and then fining users for repeated offenses, or for those who fail to register their systems. Alarm Grid takes false alarm prevention very seriously, and we would expect other monitoring companies to do the same. We do our part to make sure that our customers are properly trained in this aspect of using their systems, and we highly doubt that anyone monitored through Alarm Grid is repeatedly making the same mistake. However, we do realize that mistakes happen, so we ask any city considering a false alarm policy to consider the issue with some leniency and understanding. Remember, the overwhelming majority of end users are not intentionally causing false system alarms.

If you want to learn more about false alarm prevention, we strongly recommend checking out these tips to prevent false alarms. That link is a great resource whether you are monitored through Alarm Grid, are considering signing-up for alarm monitoring, or even if you are monitored through a different company. We also invite any Alarm Grid monitored customers, as well as those who are still exploring their options for alarm monitoring, to email our team at support@alarmgrid.com to learn more about false alarm prevention. We are here to check your emails during our usual business hours of 9am to 8pm ET M-F. As always, we look forward to hearing from you!

Nortek has announced discontinuing various 2GIG products, likely in an effort to make room for bigger and brighter things. The end of sale date for these products is November 30, 2020. This news comes after Nortek just recently discontinued a large selection of 2GIG products in September.

Starting November 30, 2020, it will no longer be possible to order the 2GIG products listed below. The last possible shipment date for these products is December 14, 2020. We will likely be discontinuing these products on our website when this happens, and we would expect other retailers to do the same. The complete list of products is outlined below, along with any appropriate replacement options, when applicable. Please note that many of these products were for use with overseas 2GIG equipment and not sold by Alarm Grid.

If you have any questions about 2GIG products, including those set for discontinuation and/or their replacements (when applicable), please reach out to our team by emailing support@alarmgrid.com. We check our email during our usual business hours of 9am to 8pm M-F. We look forward to hearing from you!

Alarm Grid is here again with its latest video recap! We have a lot of videos featuring touchscreen keypads this week, though some other topics are covered as well. As usual, Jorge, Jarrett, and yours truly are all represented. Let's check out the latest Alarm Grid videos from the team!

Pairing a 2GIG SP2 with the 2GIG GC3e

Jarrett helps you pair a 2GIG SP2 Keypad with a 2GIG GC3e Security System. Adding the SP2 Keypad will provide you with a secondary on-site location for controlling your GC3e System. You might consider installing it by your front door, by your garage door, by your back door, or in your master bedroom. Remember that the SP2 is for security functions only, and it cannot perform automation commands. The wireless keypad pairs with the GC3e through WIFI or by using an Access Point (AP).

How to Tell If a Keypad Has an RF Receiver Built-In

Jorge explains how you can determine if your alarm system keypad has a built-in RF receiver. It can be easy to confuse a keypad like the Honeywell 6160RF, which has an integrated receiver, with a similar-looking keypad that does not, such as the Honeywell 6160. If you have a hardwired alarm system, then the benefit of adding a wireless receiver is that you will be able to begin pairing compatible wireless sensors with the system. And if your keypad has a built-in receiver, then you won't need to add a standalone receiver unit.

Remove a PG9914 From its Mounting Bracket

Jarrett shows you how to remove a DSC PG9914 PowerG Motion Detection Sensor from its mounting bracket. Like all motion sensors, properly positioning and mounting the PG9914 is very important for achieving the results you want. If it is positioned improperly, then it may cause false alarms, or it may not activate when movement is present in the area. Proper mounting is also crucial if you intend to use the motion sensor for pet immunity. The PG9914 supports pet immunity of up to 85 pounds.

Determining if Your Keypad is Alphanumeric

Jorge explains the difference between an Alphanumeric Keypad like the Honeywell 6160 and a Fixed English Keypad like the Honeywell 6150. Both keypad types are good for arming and disarming and bypassing sensors. But only an Alphanumeric Keypad is good for menu-driven programming. This is because an Alphanumeric Keypad will display the relevant information as you move through the menus. If you try to program on a Fixed English Keypad, you will basically be operating blindly.

Checking the ECP and RIS Address on the Tuxedo Touch

Jorge teaches you how to check the ECP Address and the RIS Address for a Honeywell Tuxedo Touch Keypad. These settings are important when you go to set up the Tuxedo Touch with a Honeywell VISTA Security System and Total Connect 2.0. The ECP Address is used for setting up the Tuxedo Touch as a keypad controller on the VISTA System, and the RIS Address is used for setting up the Tuxedo Touch as an automation controller on Total Connect 2.0.

Disarming Using the Tuxedo Touch Keypad

Jorge shows you how to disarm your Honeywell VISTA Alarm System by using a connected Honeywell Tuxedo Touch Keypad. Since the Tuxedo Touch is a wired touchscreen keypad controller for the system, it needs to be able to perform all the standard security functions. These include arming and disarming the system. When you are disarming, you are taking the system out of a secured state so that burglary/intrusion zones are unable to cause alarms on the system.

Bypassing Zones Using a Honeywell Tuxedo Touch Keypad

Jorge explains how to bypass zones using a Honeywell Tuxedo Touch Keypad. When the zone associated with a sensor is bypassed, that sensor is ignored by the system. In other words, the system will not provide any response if that sensor is faulted. You must bypass or restore any faulted zones prior to arming the system. Bypassing is often preferred over deleting a zone entirely, as you do not have to reprogram a zone after bypassing. You can just unbypass the zone later on and use it as normal.

Providing AC Power to an Alarm System

I explain how AC power is provided to an alarm system. AC power comes from a plug-in transformer that connects to an alarm panel using wire. The transformer takes the high-voltage power provided from the outlet, and it transforms it into low-voltage power that is suitable for powering a security system. The power travels down the wire and reaches the panel. This represents the primary power source for an alarm system. If AC power is lost, then a backup battery can keep the system running temporarily until AC power is restored.

Resideo, which trades on the New York Stock Exchange (NYSE) under the acronym REZI, saw its stock price increase by more than 40% during market trading on November 5, 2020. The substantial price boost occurred thanks to an excellent third quarter (Q3) that greatly exceeded expectations.

In the company's most recent earnings report, Resideo stated that it had achieved roughly $1.36 billion in revenue for Q3. This is much higher than the consensus estimate of $1.15 billion. Resideo has enjoyed a 10% increase in revenue year over year. The company says that it expects Q4 revenue to be between $1.36 billion and $1.41 billion.

Thanks to this positive news, REZI opened Thursday at $14.20 after closing at just $11.35 the day prior. REZI enjoyed further increases throughout most of Thursday trading, as the stock price soon rose above $15. The price stayed in the $15 range during most of the day, though it did exceed the $16 threshold at times.

Resideo President and CEO Jay Geldmacher said in a recent press release, "Our revenue performance and the progress with our ongoing transformation and cost reduction initiatives enabled us to strengthen our liquidity position, and in late October we made all outstanding reimbursement agreement payments to Honeywell... While we are closely monitoring our operations and supply chain for impacts related to the COVID-19 pandemic, we are encouraged by the strong demand trends we are seeing across our end markets as we close out 2020.”

The reimbursement agreement payments that Geldmacher is referring to come from an agreement between Honeywell and Resideo after Resideo was spun-off from Honeywell in late 2018. At the end of October 2020, Resideo paid Honeywell $35 million for a payment that was deferred on April 30, 2020, as well as an additional $35 million for a regularly scheduled payment.

Resideo also mentioned some highlights in its earnings report. Their ADI Global Distribution segment saw an 11% revenue increase to $790 million. Their Products & Solutions segment enjoyed a 12% revenue increse to $572 million. Their gross margin rate increased by 200 basis points (BPS) to 27.2%. Operating income for the company is up 122% year over year, with net income up 838% year over year, and diluted earnings per share (EPS) up 900% year over year. And their adjusted EBITDA increased by 65% to $188 million.

Alarm Grid supports many Resideo Security Systems for alarm monitoring service. If you want to learn how you can monitor your home or business, please contact our team via email at support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

Network security is more important than ever, as hackers constantly strive to expose vulnerabilities and steal personal information. If your alarm system is associated with an interactive platform, then a flaw in network security could give an intruder easy access to your home or business.

The key to protecting your network and your personal information is to have multiple layers of security in place. You shouldn't just rely on one single security method, even if that one method is known for being very secure. If a vulnerability or an opening is ever exposed within that method's framework, then you could be left vulnerable.

An example of this can be seen in a vulnerability that was discovered in SonicWall Network Security Appliance (NSA) devices last month. This left more than 800,000 VPN appliances vulnerable. A patch has since been applied to these affected SonicWall devices, but that doesn't change the fact that many users were running unsecured VPNs for quite some time. Another example occurred last September, when it was found that FortiGate VPNs are vulnerable to Man-In-The-Middle (MITM) attacks when used in their default configuration.

This doesn't mean that using a VPN is a bad idea. Having a VPN in place is a great way to protect your network and your personal information. But it's important to understand that a VPN should be one of multiple protection layers keeping you safe. That way, even if your VPN fails, you will still have other mechanisms providing protection.

Network vulnerabilities can have severe consequences. Hackers can use vulnerabilities to access your personal information, including your passwords, credit card info, browsing history, and virtually all other data that you have shared with your network. In the context of a monitored security system, this can include information associated with an interactive service platform, such as Total Connect 2.0 or Alarm.com. Keep in mind that if an intruder accesses your TC2 or ADC account, they can disarm your system at-will and freely access your home or business. Having access to TC2 or ADC is basically the same as having a system code!

Fortunately, there are multiple security provisions you can set up to protect yourself. A strong VPN is a nice start. You should also set up firewalls as an added layer of security. And of course, always use secure, difficult-to-guess passwords, and never share them across different websites. You may also want to consider using two-factor authentication when available. Just yesterday, we made a post about two-factor authentication on Alarm.com. That is also an excellent way to keep your account protected.

Remember, protecting your network is your responsibility. Nobody else will do it for you. But we're here to help you. If you're monitored with Alarm Grid, feel free to reach out to us for more tips on keeping your private data safe. You may also contact us if you are interested in starting new monitoring service. Emailing our team at support@alarmgrid.com is the best way to get a prompt response. Keep in mind that we check our email from 9am to 8pm M-F. We look forward to hearing from you!

We have learned that Alarm.com now allows users to receive two-factor authentication (2FA) links via email when logging into the Alarm.com website. This is in addition to the two-factor authentication via text message when accessing the Alarm.com platform. You can set up the feature in ADC.

When two-factor authentication is enabled for your Alarm.com account, your login process will have an added layer of security. Upon logging into your Alarm.com account via the website or mobile app on a device that you haven't saved, you will need to verify yourself by providing a secret access code. You will get this code via text message or email, depending upon how you have set up the 2FA feature. In other words, accessing your Alarm.com account on a new device will require your username, password, and access to either your phone or email. This is great for keeping your Alarm.com account as secure as possible.

Remember, 2FA will only be required when you access Alarm.com from a new device. For example, if you frequently access Alarm.com using the same web browser on your computer, and you tell Alarm.com that the device can be safely trusted, then you will only need to perform 2FA the first time you login, as well as anytime you login after clearing your cookies. Some users are hesitant to enable 2FA, because they don't want to have to go through the inconvenience of entering a secret code every time. Fortunately, that isn't a concern, as Alarm.com can remember your usual devices and skip the process for these trusted devices. You can also tell Alarm.com to trust your phone so that you will only need to perform 2FA if you get a new phone or if you are using a different mobile device than usual to access your account. Whenever you access Alarm.com through a new device, after completing the 2FA process, Alarm.com will ask you if you want to save that device so that you do not have to complete 2FA every time. This protects your account, while still maximizing convenience.

If you want to enable two-factor authentication for your Alarm.com account, start by logging into the Alarm.com website. Choose Settings on the left-hand side of the screen, then choose Login Information, and then Two-Factor Authentication. Then set up the feature through email address or text message by following the on-screen prompts. If you have questions, email us at support@alarmgrid.com. This email is also great if you are interested in starting new monitoring service for access to Alarm.com. We look forward to hearing from you!