Alarm Grid Video Recap: November 11th - 13th

Our video team had a decent time last week, as five (5) new videos were released. This time, the videos feature myself and Jarrett. As always, we hope that you find them to be helpful, informative, and interesting. Remember, we make these videos to help you! Let's check out the videos.

Finding the Date Code On the FF345

I show you how to find the date code on the Encore FF345. The FF345 is a listening module for smoke detectors and CO detectors that alerts the system upon hearing the unique sound of an activated smoke detector or carbon monoxide sensor. The device is designed to be used with 2GIG Panels and Honeywell Panels. However, FF345 units from a certain batch had an error that prevented them from working with Honeywell Systems. Checking the date code is useful for determining if your unit is affected.

Cameras that Work w/ the Lyric and Total Connect

Jarrett explains which security cameras are compatible with the Honeywell Lyric and the Total Connect 2.0 platform. The only cameras that can work with TC2 are Honeywell IP Cameras. Of these cameras, only the legacy models that are no longer sold are able to interface with the Lyric for live-streaming on the panel. None of the current Honeywell HD Cameras can be streamed on the Lyric. One important note about the legacy IP cameras from Honeywell is that they had to be online to receive a critical firmware update to continue being used to this day.

The Lyric Built-In Camera Disarm Pictures Cannot be Used With HomeKit

Jarrett explains how the disarm photos that are taken using the front camera on the Honeywell Lyric will not appear on the Apple HomeKit platform. While there is a nice integration between the Lyric and HomeKit, it is only used for automation purposes and a very limited selection of security functions. Disarm photos are considered to be a security function, and they will not appear in HomeKit. The only platform that allows you to view disarm photos taken by the Lyric is Total Connect 2.0.

Night Stay On Qolsys IQ Panel 2 Plus

I explain how there is no Night Stay option for a Qolsys IQ Panel 2 Plus. Night Stay is a special type of Arm Stay. Normally, when you Arm Stay, interior zones are automatically bypassed. But when you Night Stay, motion sensors that are designated for Arm Night will remain active, instead of being bypassed. The feature is available on most Honeywell Panels, but it is not supported on the IQ2+. But there is an okay workaround for the IQ2+ that involves using specific Sensor Groups for programmed motion sensors that you want to remain active when Arming Stay.

Number of Zones On a Hardwired System Cannot be Increased

I explain why the number of zones on a hardwired alarm panel cannot be increased. The maximum number of zones that a system can support is built into its logic, and it cannot be increased. For a wired panel, only the on-board zones are initially accessible. You will need to add one or more wired expansion modules and/or a wireless receiver to open up the other zones. This will allow sensors to connect with the zones and interface with the system.