Alarm.com Is Offering a New Burglary Deterrence Feature

Alarm.com now offers a new burglary deterrence feature available from some of its cameras. Alarm Triggered Warning Sounds, once configured, will cause selected cameras to emit a siren when an alarm is triggered. This feature can be activated based on sensors, partitions, or the entire panel.

One crucial note about this feature is that it is only compatible with non-doorbell Alarm.com cameras that support the two-way audio feature. A full list of compatible cameras, with links, is available in our FAQ that walks you through setting up this new deterrence feature.

The requirements for this feature are fairly simple:

• A security service package with Panel/InApp panics enabled by your alarm dealer.
• A video service package with the Audio for Non-doorbell Cameras add-on enabled by your alarm dealer.
• At least one camera compatible with the MTWS feature.
• An IQ4 Panel (IQ Panel 4, IQ4 Hub, or IQ4 NS). You can't do this with a video-only account.

See? Easy peasy! If you have an Alarm.com camera that supports two-way audio, and it's not a doorbell camera, then it likely supports this feature. On general principle, be sure your camera is updated to the latest firmware. For most cameras, the minimum firmware to support this feature is Firmware Version 0.6.7.852+. The exception is the ADC-V515, which requires Firmware Version 0.0.5.476+.

This feature is easy to set up. Just use the Smart Rules Builder through either the customer website or the Alarm.com app available from Google or Apple. Once you log into your account it takes about two minutes to create the rule needed to utilize this feature.

The Alarm Triggered Warning Sounds (ATWS) feature works hand-in-hand with the Manually Triggered Warning Sounds (MTWS) feature. If you have any MTWS capable cameras, then you know you will be able to configure the ATWS feature and vice versa. Manually Triggered Warning Sounds are not automated. Instead, a user must manually trigger the sound while logged into either the app or the website. You can check out how to use MTWS here.

When you manually trigger a warning sound from one or more cameras, the sound duration is 30 seconds, unless you manually turn the warning sound off sooner. When the warning sound is alarm triggered, the duration is five (5) minutes, or until the alarm is canceled by a user disarming the system where the alarm occurred.

Scenario 1: Manual Trigger

You're away from your home or business. You receive an alert that motion has been detected by one of your cameras. You log into the app and, pulling up the live view for your camera see a person or animal in an area of your property where they don't belong. While you're viewing the live video, and assuming this is a compatible camera, you can choose to trigger a warning sound that will hopefully scare the person or animal away. In this scenario the Manually Triggered Warning Sound can be used to great effect.

Scenario 2: Alarm Trigger

You're at home, and your system is armed in the Home mode. While you're asleep an intruder attempts to enter your home by breaking a first floor window. They may have triggered an alert from one of your outdoor cameras, but you slept through it. The window they're attempting to enter through has a glass break detector associated with it and this detector is active when the system is armed in Home mode. The intruder breaks the window, but the alarm goes off. This causes not only the alarm panel, but also your outdoor cameras to begin sounding a siren. The would-be intruder hears the sirens and leaves, preventing an actual break in.

One limitation of all-in-one panels is that they aren't high-current siren friendly. That's not to say that you can't add one of these sirens, but it takes some work and it can get expensive. Not to mention, where do you put the equipment for it? By allowing the cameras that offer siren sounds to use those sirens in an alarm situation you're adding extra sirens to the system at no additional cost, assuming you planned to have compatible cameras anyway. In my opinion, this is a great new feature. It's also an example of how Alarm.com continues to add value to their products without requiring additional investment.