Alarm Keypads Posts

Alarm Grid offers the latest wireless keypads, compatible with IQ4 and IQ Pro panels. The Qolsys IQ Keypad-PG is a simple capacitive touch keypad, while the Qolsys IQ Keypad Prox-PG adds a prox tag reader for easy use. Both keypads offer PowerG's impressive range for reliable communication.

Below is the IQ Keypad Prox-PG. The bullseye symbol in the lower right denotes the proximity reader:

As wonderful as a big, beautiful touchscreen interface is, sometimes you just need to arm or disarm the system and don't want to walk to the panel to do it. Maybe you're entering or exiting through a seldom-used basement door or planning to hang out in the garage when you arrive home. A secondary arming and disarming station can come in handy, for a wide variety of reasons.

Enter the two (2) new PowerG keypads available from Qolsys. The Qolsys IQ Keypad-PG is a basic wireless keypad that allows you to disarm by entering a valid code through the number pad. It has icons for single-touch Night, Away, and Stay arming when secure arming is disabled. When secure arming is enabled, arm using any valid user code.

If you can arm through the touchscreen without entering a code, then Secure Arming is disabled. You can change this setting by tapping the gray menu bar at the top of the screen, above the date and time, then tapping Settings > Advanced Settings > Enter Installer or Dealer Code (1111 or 2222 respectively, by default) > Installation > Security & Arming > Secure Arming. This feature is disabled by default. That means, by default, you can arm the system without entering a valid code.

When we talk about the IQ4 panels, we're talking about the IQ Panel 4, the Qolsys flagship, top-of-the-line, feature-rich touchscreen panel. Also included is the IQ4 Hub, another touchscreen panel with a slightly trimmed-down feature set. And finally, the IQ4 NS rounds out this panel lineup. The IQ4 NS is a budget-friendly option with nearly identical features as the IQ4 Hub, minus the touchscreen interface. All these panels support the IQ Keypad-PG and the IQ Keypad Prox-PG and prox tag arming/disarming. Just be sure the panel has the latest firmware.

IQ Keypad-PG

The IQ Keypad-PG is a stylish capacitive-touch numerical keypad. It has PowerG wireless transmitting capability and offers superior range, military-grade, 128-bit AES encryption, and bi-directional communication with the panel. Four (4) AA batteries are used to power the unit. Only Energizer AA 1.5 Volt Alkaline batteries should be used. The expected battery life is three (3) years. Each alarm system can support up to five (5) keypads.

IQ Keypad Prox-PG

The IQ Keypad Prox-PG has the same features and specifications as the IQ Keypad-PG, with one exception. It supports prox tags. If you're unfamiliar with prox tags, they're small, hand-held devices that allow you to easily arm and disarm the system by presenting the tag to the keypad in the designated space. When you present your valid tag to the keypad while the system is armed, it will toggle the system to a disarmed state. If you present your tag to the keypad when the system is disarmed, it will attempt to arm the system.

Prox tags come in packs of four (4). The included clip allows them to connect easily to a key ring:

If Force Arm is enabled when you present your prox tag to arm the system, any faulted zones will automatically be bypassed and then the system will arm. If Force Arm is disabled the system will refuse to arm until all zones are restored and the prox tag is presented again. Also, when you present a prox tag to the keypad while the system is disarmed, it will first attempt to arm Stay, then if you present the tag again, it will arm Away.

You can verify the Force Arm setting by tapping the gray menu bar at the top of the screen, above the time and date. Then tap Settings > Advanced Settings > Enter Installer or Dealer Code (1111 or 2222 respectively, by default) > Installation > Security & Arming > Force Arm. This feature is enabled by default. That means, if you attempt to arm and any zones are open or faulted, they will automatically be bypassed so the system can arm.

Specifications:

• Models: IQ Keypad-PG, IQ Keypad Prox-PG (4 Prox Tags Included)
• Interface: Capacitive touch keypad (0-9, *, #, Arm Stay, Arm Away, Arm Night options)
• Available Frequency: PowerG 912 - 919 MHz
• Status Indicator: Status LEDs (Trouble, Arming, Status)
• Sounder: One (1) for key presses, chirps, and alarms.
• Tamper: Yes, Wall and Enclosure Tamper.
• Power Source: 4 x AA – Use only Energizer AA 1.5V Alkaline Batteries.
• Dimensions (H x W x D): 6.1” x 4.6” x .91” (155mm x 117mm x 23mm)
• Mounting Options: Back plate, wall mount only.
• UL/cUL/ULC Certification: UL/cUL Residential Fire and Burglary and UL/ULC Commercial Burglary Alarm Control Unit. Compliant with standards: UL985, UL1023, UL2610, ULC-S545, ULC-S304.
• FCC/IC Certification: FCC ID: 2AAJXQS-IQKP IC: 11205A-QSIQKP.
• Operating Temperature: 14°F - 131°F (-10°C - +55°C) With up to 93% relative humidity, indoor, dry, climate-controlled use only (*)

*UL has only verified operation in 32°F - 120.2°F (0°C - +49°C) and 93% Relative Humidity.

Alarm Grid offers the latest wireless keypads, compatible with IQ4 and IQ Pro panels. The Qolsys IQ Keypad-PG is a simple capacitive touch keypad, while the Qolsys IQ Keypad Prox-PG adds a prox tag reader for easy use. Both keypads offer PowerG's impressive range for reliable communication.

Below is the IQ Keypad Prox-PG. The bullseye symbol in the lower right denotes the proximity reader:

As wonderful as a big, beautiful touchscreen interface is, sometimes you just need to arm or disarm the system and don't want to walk to the panel to do it. Maybe you're entering or exiting through a seldom-used basement door or planning to hang out in the garage when you arrive home. A secondary arming and disarming station can come in handy, for a wide variety of reasons.

Enter the two (2) new PowerG keypads available from Qolsys. The Qolsys IQ Keypad-PG is a basic wireless keypad that allows you to disarm by entering a valid code through the number pad. It has icons for single-touch Night, Away, and Stay arming when secure arming is disabled. When secure arming is enabled, arm using any valid user code.

If you can arm through the touchscreen without entering a code, then Secure Arming is disabled. You can change this setting by tapping the gray menu bar at the top of the screen, above the date and time, then tapping Settings > Advanced Settings > Enter Installer or Dealer Code (1111 or 2222 respectively, by default) > Installation > Security & Arming > Secure Arming. This feature is disabled by default. That means, by default, you can arm the system without entering a valid code.

When we talk about the IQ4 panels, we're talking about the IQ Panel 4, the Qolsys flagship, top-of-the-line, feature-rich touchscreen panel. Also included is the IQ4 Hub, another touchscreen panel with a slightly trimmed-down feature set. And finally, the IQ4 NS rounds out this panel lineup. The IQ4 NS is a budget-friendly option with nearly identical features as the IQ4 Hub, minus the touchscreen interface. All these panels support the IQ Keypad-PG and the IQ Keypad Prox-PG and prox tag arming/disarming. Just be sure the panel has the latest firmware.

IQ Keypad-PG

The IQ Keypad-PG is a stylish capacitive-touch numerical keypad. It has PowerG wireless transmitting capability and offers superior range, military-grade, 128-bit AES encryption, and bi-directional communication with the panel. Four (4) AA batteries are used to power the unit. Only Energizer AA 1.5 Volt Alkaline batteries should be used. The expected battery life is three (3) years. Each alarm system can support up to five (5) keypads.

IQ Keypad Prox-PG

The IQ Keypad Prox-PG has the same features and specifications as the IQ Keypad-PG, with one exception. It supports prox tags. If you're unfamiliar with prox tags, they're small, hand-held devices that allow you to easily arm and disarm the system by presenting the tag to the keypad in the designated space. When you present your valid tag to the keypad while the system is armed, it will toggle the system to a disarmed state. If you present your tag to the keypad when the system is disarmed, it will attempt to arm the system.

Prox tags come in packs of four (4). The included clip allows them to connect easily to a key ring:

If Force Arm is enabled when you present your prox tag to arm the system, any faulted zones will automatically be bypassed and then the system will arm. If Force Arm is disabled the system will refuse to arm until all zones are restored and the prox tag is presented again. Also, when you present a prox tag to the keypad while the system is disarmed, it will first attempt to arm Stay, then if you present the tag again, it will arm Away.

You can verify the Force Arm setting by tapping the gray menu bar at the top of the screen, above the time and date. Then tap Settings > Advanced Settings > Enter Installer or Dealer Code (1111 or 2222 respectively, by default) > Installation > Security & Arming > Force Arm. This feature is enabled by default. That means, if you attempt to arm and any zones are open or faulted, they will automatically be bypassed so the system can arm.

Specifications:

• Models: IQ Keypad-PG, IQ Keypad Prox-PG (4 Prox Tags Included)
• Interface: Capacitive touch keypad (0-9, *, #, Arm Stay, Arm Away, Arm Night options)
• Available Frequency: PowerG 912 - 919 MHz
• Status Indicator: Status LEDs (Trouble, Arming, Status)
• Sounder: One (1) for key presses, chirps, and alarms.
• Tamper: Yes, Wall and Enclosure Tamper.
• Power Source: 4 x AA – Use only Energizer AA 1.5V Alkaline Batteries.
• Dimensions (H x W x D): 6.1” x 4.6” x .91” (155mm x 117mm x 23mm)
• Mounting Options: Back plate, wall mount only.
• UL/cUL/ULC Certification: UL/cUL Residential Fire and Burglary and UL/ULC Commercial Burglary Alarm Control Unit. Compliant with standards: UL985, UL1023, UL2610, ULC-S545, ULC-S304.
• FCC/IC Certification: FCC ID: 2AAJXQS-IQKP IC: 11205A-QSIQKP.
• Operating Temperature: 14°F - 131°F (-10°C - +55°C) With up to 93% relative humidity, indoor, dry, climate-controlled use only (*)

*UL has only verified operation in 32°F - 120.2°F (0°C - +49°C) and 93% Relative Humidity.

Here at Alarm Grid, we recently learned that the Qolsys IQ Panel 4 supports the Qolsys IQ Remote, but only the most recent iteration. Older Qolsys IQ Remotes are not compatible. If you plan to replace a Qolsys IQ Panel 2 with an IQ Panel 4, read on to see how you can tell the keypads apart.

As of now, only the Qolsys IQ Panel 4 AT&T LTE, Interlogix/GE Compatible version, and the Qolsys IQ Panel 4 Verizon LTE, Interlogix/GE Compatible version are available. The other iterations of the panel will become available in the next couple of months. The only touchscreen keypad that is currently compatible with these panels is the Qolsys IQ Remote, and only the latest version with P/N QW9104-840, at that. Keypads with a P/N of QW9103-840 or below are not compatible. The sticker showing the part number should be on the back of the keypad.

Below, you can see the back of an IQ Remote with the P/N: QW9103-840. This keypad is not compatible with a Qolsys IQ Panel 4:

Looking at the sticker on the back of the keypad is the first way to easily determine whether the IQ Remote will work with the IQ Panel 4 or not. But, what if the sticker has been removed, or the touchscreen keypad has been mounted to the wall and the back side is difficult to access? There is another easy way to tell whether the IQ Remote you have is the older or newer version.

When the IQ Remote was re-designed, the front-facing camera was moved from the upper right corner to the center of the keypad. This was done, in part to better match the look of the Qolsys IQ Panel 2/2 Plus. Checking the location of the camera is the easiest way to determine whether it is a newer or an older Qolsys IQ Remote.

Below you can see one of the original Qolsys IQ Remotes. You can see that the camera is located in the upper right corner of the keypad.

Below is an image of the newer Qolsys IQ Remote, P/N QW9104-840. You can see the camera has been moved to the front center, and in the upper right corner you can see that a microphone has been added:

Checking the camera location is by far the easiest and quickest way to determine if the IQ Remote you have is compatible with the Qolsys IQ Panel 4. It's rumored that a PowerG Touchscreen Keypad is in the works, which, if true will likely make the IQ Remote obsolete given the superior wireless range of the PowerG protocol.

The Qolsys IQ Panel 4 can support up to three (3) IQ Remotes, but it also supports the use of up to five (5) Wireless PowerG Keypads (WS9LCDWF9, HS2LCDWF9, and HS2LCDWF9ENG) and up to two (2) Hardwired DSC Keypads (HS2LCD, HS2ICN) per DSC PG9WLSHW8 PowerG Wired to Wireless translator module. Up to two (2) modules are currently supported per panel, so up to four (4) of the wired keypads can be used. This gives a total of up to 12 remote keypads.

Have comments, questions, suggestions? Leave a comment below and we'll be happy to respond. Our support hours are from 9:00 am - 8:00 pm Eastern Time, Monday - Friday, and our support email is support@alarmgrid.com. We always look forward to hearing from you.

Here at Alarm Grid, we recently learned that the Qolsys IQ Panel 4 supports the Qolsys IQ Remote, but only the most recent iteration. Older Qolsys IQ Remotes are not compatible. If you plan to replace a Qolsys IQ Panel 2 with an IQ Panel 4, read on to see how you can tell the keypads apart.

As of now, only the Qolsys IQ Panel 4 AT&T LTE, Interlogix/GE Compatible version, and the Qolsys IQ Panel 4 Verizon LTE, Interlogix/GE Compatible version are available. The other iterations of the panel will become available in the next couple of months. The only touchscreen keypad that is currently compatible with these panels is the Qolsys IQ Remote, and only the latest version with P/N QW9104-840, at that. Keypads with a P/N of QW9103-840 or below are not compatible. The sticker showing the part number should be on the back of the keypad.

Below, you can see the back of an IQ Remote with the P/N: QW9103-840. This keypad is not compatible with a Qolsys IQ Panel 4:

Looking at the sticker on the back of the keypad is the first way to easily determine whether the IQ Remote will work with the IQ Panel 4 or not. But, what if the sticker has been removed, or the touchscreen keypad has been mounted to the wall and the back side is difficult to access? There is another easy way to tell whether the IQ Remote you have is the older or newer version.

When the IQ Remote was re-designed, the front-facing camera was moved from the upper right corner to the center of the keypad. This was done, in part to better match the look of the Qolsys IQ Panel 2/2 Plus. Checking the location of the camera is the easiest way to determine whether it is a newer or an older Qolsys IQ Remote.

Below you can see one of the original Qolsys IQ Remotes. You can see that the camera is located in the upper right corner of the keypad.

Below is an image of the newer Qolsys IQ Remote, P/N QW9104-840. You can see the camera has been moved to the front center, and in the upper right corner you can see that a microphone has been added:

Checking the camera location is by far the easiest and quickest way to determine if the IQ Remote you have is compatible with the Qolsys IQ Panel 4. It's rumored that a PowerG Touchscreen Keypad is in the works, which, if true will likely make the IQ Remote obsolete given the superior wireless range of the PowerG protocol.

The Qolsys IQ Panel 4 can support up to three (3) IQ Remotes, but it also supports the use of up to five (5) Wireless PowerG Keypads (WS9LCDWF9, HS2LCDWF9, and HS2LCDWF9ENG) and up to two (2) Hardwired DSC Keypads (HS2LCD, HS2ICN) per DSC PG9WLSHW8 PowerG Wired to Wireless translator module. Up to two (2) modules are currently supported per panel, so up to four (4) of the wired keypads can be used. This gives a total of up to 12 remote keypads.

Have comments, questions, suggestions? Leave a comment below and we'll be happy to respond. Our support hours are from 9:00 am - 8:00 pm Eastern Time, Monday - Friday, and our support email is support@alarmgrid.com. We always look forward to hearing from you.

The leading keypad option for the Qolsys IQ Panel 2 Plus is unquestionably the Qolsys IQ Remote. This innovative touchscreen keypad mimics the screen of an IQ2 or IQ2+, and it allows for security and automation control from a second on-site location. But sadly, it lacks a replaceable battery!

To be clear, the Qolsys IQ Remote does have a backup battery. When AC power for the IQ Remote is lost (either due to the transformer being unplugged or an electrical outage), the backup battery will keep it running for several hours. But like any rechargeable battery, the one inside the Qolsys IQ Remote has a limited useful life. And once that useful life is up, the battery cannot be replaced with a new one. This means that the IQ Remote Keypad will need to be plugged in at all times in order to be used. If AC power becomes lost for any reason once this happens, then the IQ Remote will immediately power down. Also, the keypad will then always show a low-battery warning that can never be cleared. While not completely debilitating, it is an unfortunate aspect of the Qolsys IQ Remote device.

When we spoke with Qolsys about this issue, they assured us that the IQ Remote battery is "very long lasting", and a user shouldn't encounter this issue for at least ten (10) years from the initial manufacture date, assuming that the battery is cared for properly. Additionally, the company has stated that they have not received any excessive reports of IQ Remote battery failures since its release more than five (5) years ago. But it's fair to expect that Qolsys might be hearing about this issue more frequently in about five year's time when a large number of Qolsys IQ Remote batteries begin failing! At least most IQ Remote Keypads are not carried or transported around, and most users just leave them mounted in a single location. If a user gets a backup generator for the device, then the issue might not cause serious problems.

Still, this is definitely a disappointing limitation of the Qolsys IQ Remote Keypad. We hope that Qolsys will see this message and consider updating the IQ Remote to support an end-user replaceable battery. A well-constructed device can certainly be used for more than 10 years, but it needs a replaceable battery option so that it can truly go the maximum distance. Also, for anyone considering the IQ Remote for use with an IQ Panel 2 or IQ Panel 2 Plus, we still think it's a great keypad option, and we still recommend using it. Just be aware that after ten (10) years or so, the battery will probably stop holding a charge and will begin not working as intended. The keypad will need to be plugged in and receiving power at all times once this happens, or else it will power down immediately. Our hope is that Qolsys redesigns the IQ Remote Keypad to put an end to this issue. Then a user can buy a new battery once the original reaches its end-of-life, install the new one, and keep using this great keypad!

For now, we would love to hear what you have to say about the Qolsys IQ Remote lacking a replaceable battery. Does this issue influence your decision in buying this keypad? Or do you think that it's not a major concern? Please let us know your thoughts in a comment down below. We're sure that many users who buy this keypad, and also those who have bought it in the past, may be surprised to learn that the device's backup battery cannot be replaced. And if we ever learn of Qolsys updating the IQ Remote to fix this issue, or releasing a successor keypad with a replaceable battery, then we will be sure to let you know in the Alarm Grid Blog so that you can make an informed buying decision. Please stay tuned for more security news and updates coming real soon!

And before we forget, we wish everyone in the United States a Happy Independence Day (4th of July) over this upcoming weekend! We are open today, Friday, July 2nd, and we will also be open for business as usual on Monday, July 5th. We look forward to serving you!

The leading keypad option for the Qolsys IQ Panel 2 Plus is unquestionably the Qolsys IQ Remote. This innovative touchscreen keypad mimics the screen of an IQ2 or IQ2+, and it allows for security and automation control from a second on-site location. But sadly, it lacks a replaceable battery!

To be clear, the Qolsys IQ Remote does have a backup battery. When AC power for the IQ Remote is lost (either due to the transformer being unplugged or an electrical outage), the backup battery will keep it running for several hours. But like any rechargeable battery, the one inside the Qolsys IQ Remote has a limited useful life. And once that useful life is up, the battery cannot be replaced with a new one. This means that the IQ Remote Keypad will need to be plugged in at all times in order to be used. If AC power becomes lost for any reason once this happens, then the IQ Remote will immediately power down. Also, the keypad will then always show a low-battery warning that can never be cleared. While not completely debilitating, it is an unfortunate aspect of the Qolsys IQ Remote device.

When we spoke with Qolsys about this issue, they assured us that the IQ Remote battery is "very long lasting", and a user shouldn't encounter this issue for at least ten (10) years from the initial manufacture date, assuming that the battery is cared for properly. Additionally, the company has stated that they have not received any excessive reports of IQ Remote battery failures since its release more than five (5) years ago. But it's fair to expect that Qolsys might be hearing about this issue more frequently in about five year's time when a large number of Qolsys IQ Remote batteries begin failing! At least most IQ Remote Keypads are not carried or transported around, and most users just leave them mounted in a single location. If a user gets a backup generator for the device, then the issue might not cause serious problems.

Still, this is definitely a disappointing limitation of the Qolsys IQ Remote Keypad. We hope that Qolsys will see this message and consider updating the IQ Remote to support an end-user replaceable battery. A well-constructed device can certainly be used for more than 10 years, but it needs a replaceable battery option so that it can truly go the maximum distance. Also, for anyone considering the IQ Remote for use with an IQ Panel 2 or IQ Panel 2 Plus, we still think it's a great keypad option, and we still recommend using it. Just be aware that after ten (10) years or so, the battery will probably stop holding a charge and will begin not working as intended. The keypad will need to be plugged in and receiving power at all times once this happens, or else it will power down immediately. Our hope is that Qolsys redesigns the IQ Remote Keypad to put an end to this issue. Then a user can buy a new battery once the original reaches its end-of-life, install the new one, and keep using this great keypad!

For now, we would love to hear what you have to say about the Qolsys IQ Remote lacking a replaceable battery. Does this issue influence your decision in buying this keypad? Or do you think that it's not a major concern? Please let us know your thoughts in a comment down below. We're sure that many users who buy this keypad, and also those who have bought it in the past, may be surprised to learn that the device's backup battery cannot be replaced. And if we ever learn of Qolsys updating the IQ Remote to fix this issue, or releasing a successor keypad with a replaceable battery, then we will be sure to let you know in the Alarm Grid Blog so that you can make an informed buying decision. Please stay tuned for more security news and updates coming real soon!

And before we forget, we wish everyone in the United States a Happy Independence Day (4th of July) over this upcoming weekend! We are open today, Friday, July 2nd, and we will also be open for business as usual on Monday, July 5th. We look forward to serving you!

We recently came across an article from Bonka Bird Toys expressing their satisfaction with Alarm Grid and their new security system and security camera setup. Bonka Bird Toys is a local business, located right down the road from Alarm Grid. Thank you Bonka for your continued support!

Bonka Bird Toys has quite an intricate setup, centered around a Qolsys IQ Panel 2 Plus Security System. It is a dual-path system, complete with encrypted PowerG Sensors, and four (4) IQ Remote Keypads. Bonka says that they opted to not mount their IQ Remote Keypads, and instead carry them around loose like small tablets, and keep them at their desks. They particularly love being able to check their security cameras right from their IQ Remote devices. Having an IQ Remote at each workstation is really convenient!

According to Bonka Bird Toys, their favorite part of their setup is their security cameras. They used two (2) types of commercial grade Alarm.com Security Cameras, including the Alarm.com ADC-VC736 and the Alarm.com ADC-VC836. They even added the Alarm.com ADC-CSVR126 Commercial Streaming Video Recorder to facilitate a continuous 24-hour recording schedule. In addition to their IQ Panel 2 Plus and their IQ Remote Keypads, Bonka also set up a dedicated monitor that shows their camera feeds. They placed it up in a prominent spot where they can check it any time. We think this is a fantastic example of what kind of setup you can achieve with a security system and Alarm.com Cameras!

Bonka Bird Toys also set up a complete automation network of Z-Wave Plus devices, including lights, door locks, and thermostats. They love being able to control these devices locally from their alarm panel and keypads, and remotely from the Alarm.com platform on their phones and computers. Bonka Bird Toys also states that it was really easy to install their equipment. It took them just a single afternoon to get everything ready and going, and they saved thousands of dollars by doing it themselves rather than hiring a professional installer. This is the same type of robust setup that you can achieve for your home or business. And you can easily install everything yourself to save money,

If you are looking for the best bird toys, birdcages, aviaries, and accessories, then be sure to check out the Bonka Bird Toys website. And if you have any questions about how you can get started with Alarm Grid monitoring service, then reach out to us by emailing our support team and security system planners at support@alarmgrid.com. We're here to check your emails from 9am to 8pm ET M-F. We look forward to hearing from you!

We recently came across an article from Bonka Bird Toys expressing their satisfaction with Alarm Grid and their new security system and security camera setup. Bonka Bird Toys is a local business, located right down the road from Alarm Grid. Thank you Bonka for your continued support!

Bonka Bird Toys has quite an intricate setup, centered around a Qolsys IQ Panel 2 Plus Security System. It is a dual-path system, complete with encrypted PowerG Sensors, and four (4) IQ Remote Keypads. Bonka says that they opted to not mount their IQ Remote Keypads, and instead carry them around loose like small tablets, and keep them at their desks. They particularly love being able to check their security cameras right from their IQ Remote devices. Having an IQ Remote at each workstation is really convenient!

According to Bonka Bird Toys, their favorite part of their setup is their security cameras. They used two (2) types of commercial grade Alarm.com Security Cameras, including the Alarm.com ADC-VC736 and the Alarm.com ADC-VC836. They even added the Alarm.com ADC-CSVR126 Commercial Streaming Video Recorder to facilitate a continuous 24-hour recording schedule. In addition to their IQ Panel 2 Plus and their IQ Remote Keypads, Bonka also set up a dedicated monitor that shows their camera feeds. They placed it up in a prominent spot where they can check it any time. We think this is a fantastic example of what kind of setup you can achieve with a security system and Alarm.com Cameras!

Bonka Bird Toys also set up a complete automation network of Z-Wave Plus devices, including lights, door locks, and thermostats. They love being able to control these devices locally from their alarm panel and keypads, and remotely from the Alarm.com platform on their phones and computers. Bonka Bird Toys also states that it was really easy to install their equipment. It took them just a single afternoon to get everything ready and going, and they saved thousands of dollars by doing it themselves rather than hiring a professional installer. This is the same type of robust setup that you can achieve for your home or business. And you can easily install everything yourself to save money,

If you are looking for the best bird toys, birdcages, aviaries, and accessories, then be sure to check out the Bonka Bird Toys website. And if you have any questions about how you can get started with Alarm Grid monitoring service, then reach out to us by emailing our support team and security system planners at support@alarmgrid.com. We're here to check your emails from 9am to 8pm ET M-F. We look forward to hearing from you!

Many users consider adding keypads to their alarm systems so that they can control their systems from multiple on-site locations. And for wired panels, at least one keypad is required for on-site operation. Today, we will briefly cover some of the alarm keypads that you might encounter.

First, it is important to understand that a keypad is NOT an actual alarm system. It is merely an input and output device for an alarm system. A user will input commands through the alarm keypad. The system will also provide information about security panel status through the keypad. Nearly all keypads will provide basic functionality, such as arming and disarming and bypassing zones. Some more advanced keypads may offer additional capabilities, such as system programming and performing home automation functions.

If you have a wired system, then you will absolutely need at least one keypad. This is because the panel will need some means for on-site operation. When adding your first keypad to a wired system, it is usually recommended that you get an alphanumeric keypad with a built-in wireless receiver. Alphanumeric means that the keypad will display full language text, which is important for successfully programming the system. Having a built-in wireless receiver will allow you to start pairing wireless sensors with the system, which will give you more flexible installation options. Examples of alphanumeric keypads with integrated wireless receivers include the Honeywell 6160RF for Honeywell VISTA Systems and the DSC HS2LCDRF9 N for DSC PowerSeries NEO Systems. For additional keypads, you should just use standard keypad models, without integrated wireless receiver modules.

But for a wireless system, adding a keypad is almost always optional. This is because a wireless panel is consider "all-in-one", and you can control the system directly from the panel itself. Some wireless panels like the Honeywell Lyric and the Qolsys IQ Panel 2 Plus have built-in touchscreen controllers for this purpose. Other wireless panels like the Honeywell LYNX Plus L3000 have a less fancy, but still perfectly functional, numeric touchpad for this task. Most wireless system users don't bother adding an external system keypad.

That being said, you can still choose to add a keypad to a wireless system if you want. The benefit to adding a keypad is that you will have an additional physical device for controlling your system while you are on-site. This can be very useful if you have multiple entrances for coming and going, such as a front door, back door, and garage door. You might also consider putting a keypad in an easily accessible location, such as by the bed in your master bedroom so that you can conveniently operate your security system from that location as well.

Many systems will provide you with multiple keypad options to choose from. Depending on your needs, you may be selecting between a numeric touchpad keypad and a touchscreen keypad. A numeric touchpad keypad is operated by pressing various buttons on the device to enter specific codes and command sequences. These keypads are relatively basic, but they can be convenient for performing simple system functions. On the other hand, a touchscreen keypad will provide a colorful touchscreen display with intuitive menu icons. This can be more cheerful and inviting for someone who isn't used to operating an alarm system. The downside with a touchscreen keypad is that they are often much more expensive than numeric touchpad keypads. And it's also important to understand that your selection of keypad choices may be limited based on the panel you are using.

But before you navigate our site to start purchasing new keypads for your system, you should really consider if you actually need one. The most common alternative to a secondary system keypad is an interactive service platform that can be accessed through your phone or a web browser. If your system is monitored, then there's a good chance that you already have access to one of these platforms. Most Alarm Grid monitored customers have access to either Total Connect 2.0 or Alarm.com, depending on the system they are using. Both platforms can be conveniently accessed remotely to offer the same functionality that you would get from a physical on-site keypad. So instead of going to your secondary system keypad, you might just pull up your phone to access Total Connect 2.0 or Alarm.com and control your system from there! Check out our monitoring plans to see which ones offer access to these exciting platforms.

Another option is to get a key fob for your system. A key fob is a small handheld device that enrolls with a security system wirelessly to perform various inputs and commands. You can easily carry a key fob around in your pocket or purse, or you can put it on a key ring for easy access. Then, with a press of a button, you can arm or disarm, trigger an automation device, or activate an alarm on your system. Key fobs are often more limited than fixed-location keypads, but they can be very convenient for performing quick commands. Just make sure to not lose your key fob. The devices are quite small, and they can easily become misplaced or lost. The same usually cannot be said for a keypad mounted on your wall!

If you are interested in learning more about alarm system keypads, or if you want to find out which keypads are compatible with your system, then we are happy to help! We offer a wide selection of keypads for use with many types of security systems. The best way to contact us is to email support@alarmgrid.com. If you are trying to determine system compatibility, then you may want to include a picture of your panel so that we know what brand and model you are working with. Remember that our hours for checking email run from 9am to 8pm ET M-F. We look forward to hearing from you!

Many users consider adding keypads to their alarm systems so that they can control their systems from multiple on-site locations. And for wired panels, at least one keypad is required for on-site operation. Today, we will briefly cover some of the alarm keypads that you might encounter.

First, it is important to understand that a keypad is NOT an actual alarm system. It is merely an input and output device for an alarm system. A user will input commands through the alarm keypad. The system will also provide information about security panel status through the keypad. Nearly all keypads will provide basic functionality, such as arming and disarming and bypassing zones. Some more advanced keypads may offer additional capabilities, such as system programming and performing home automation functions.

If you have a wired system, then you will absolutely need at least one keypad. This is because the panel will need some means for on-site operation. When adding your first keypad to a wired system, it is usually recommended that you get an alphanumeric keypad with a built-in wireless receiver. Alphanumeric means that the keypad will display full language text, which is important for successfully programming the system. Having a built-in wireless receiver will allow you to start pairing wireless sensors with the system, which will give you more flexible installation options. Examples of alphanumeric keypads with integrated wireless receivers include the Honeywell 6160RF for Honeywell VISTA Systems and the DSC HS2LCDRF9 N for DSC PowerSeries NEO Systems. For additional keypads, you should just use standard keypad models, without integrated wireless receiver modules.

But for a wireless system, adding a keypad is almost always optional. This is because a wireless panel is consider "all-in-one", and you can control the system directly from the panel itself. Some wireless panels like the Honeywell Lyric and the Qolsys IQ Panel 2 Plus have built-in touchscreen controllers for this purpose. Other wireless panels like the Honeywell LYNX Plus L3000 have a less fancy, but still perfectly functional, numeric touchpad for this task. Most wireless system users don't bother adding an external system keypad.

That being said, you can still choose to add a keypad to a wireless system if you want. The benefit to adding a keypad is that you will have an additional physical device for controlling your system while you are on-site. This can be very useful if you have multiple entrances for coming and going, such as a front door, back door, and garage door. You might also consider putting a keypad in an easily accessible location, such as by the bed in your master bedroom so that you can conveniently operate your security system from that location as well.

Many systems will provide you with multiple keypad options to choose from. Depending on your needs, you may be selecting between a numeric touchpad keypad and a touchscreen keypad. A numeric touchpad keypad is operated by pressing various buttons on the device to enter specific codes and command sequences. These keypads are relatively basic, but they can be convenient for performing simple system functions. On the other hand, a touchscreen keypad will provide a colorful touchscreen display with intuitive menu icons. This can be more cheerful and inviting for someone who isn't used to operating an alarm system. The downside with a touchscreen keypad is that they are often much more expensive than numeric touchpad keypads. And it's also important to understand that your selection of keypad choices may be limited based on the panel you are using.

But before you navigate our site to start purchasing new keypads for your system, you should really consider if you actually need one. The most common alternative to a secondary system keypad is an interactive service platform that can be accessed through your phone or a web browser. If your system is monitored, then there's a good chance that you already have access to one of these platforms. Most Alarm Grid monitored customers have access to either Total Connect 2.0 or Alarm.com, depending on the system they are using. Both platforms can be conveniently accessed remotely to offer the same functionality that you would get from a physical on-site keypad. So instead of going to your secondary system keypad, you might just pull up your phone to access Total Connect 2.0 or Alarm.com and control your system from there! Check out our monitoring plans to see which ones offer access to these exciting platforms.

Another option is to get a key fob for your system. A key fob is a small handheld device that enrolls with a security system wirelessly to perform various inputs and commands. You can easily carry a key fob around in your pocket or purse, or you can put it on a key ring for easy access. Then, with a press of a button, you can arm or disarm, trigger an automation device, or activate an alarm on your system. Key fobs are often more limited than fixed-location keypads, but they can be very convenient for performing quick commands. Just make sure to not lose your key fob. The devices are quite small, and they can easily become misplaced or lost. The same usually cannot be said for a keypad mounted on your wall!

If you are interested in learning more about alarm system keypads, or if you want to find out which keypads are compatible with your system, then we are happy to help! We offer a wide selection of keypads for use with many types of security systems. The best way to contact us is to email support@alarmgrid.com. If you are trying to determine system compatibility, then you may want to include a picture of your panel so that we know what brand and model you are working with. Remember that our hours for checking email run from 9am to 8pm ET M-F. We look forward to hearing from you!