Qolsys Announces End of Life for Qolsys IQ Panel 2 Plus

Qolsys TSB #211022 indicates that the Qolsys IQ Panel 2 Plus, PowerG and 319.5 MHz version with any communicator has been discontinued. All kits containing these versions have also been discontinued. The IQ Panel 4 PowerG and 319.5 MHz panel is the appropriate replacement in this instance.

Currently Alarm Grid offers the Qolsys IQ Panel 4 Verizon LTE, Interlogix/GE Compatible 319.5 MHz Wireless Alarm Panel w/ PowerG, and the Qolsys IQ Panel 4 AT&T LTE, Interlogix/GE Compatible 319.5 MHz Wireless Alarm Panel w/ PowerG. Both versions will eventually be offered in Black or White color variations, but at this time only the White variation is available.

This announcement is only for the Interlogix/GE compatible panels that support legacy RF in the 319.5 MHz frequency. The other variations of the IQ Panel 2 Plus, those that support 345 MHz Honeywell and 2GIG legacy RF, and 433 MHz DSC legacy RF sensors are still available at this time. This is because production for the IQ Panel 4 versions of these panels has not yet begun.

Per Qolsys, the IQ Panel 4 PowerG and Honeywell/2GIG compatible panels that support 345 MHz legacy RF sensors are beginning production this week. As supply ramps up, the Qolsys IQ Panel 2 Plus that supports this legacy RF frequency will be phased out. We expect this to begin happening in the near future. Production of the IQ Panel 4 for the DSC compatible panels that support 433 MHz legacy RF sensors will begin production in early December, with a similar phase out of those IQ Panel 2 Plus models soon to follow.

As with the IQ Panel 2 Plus, each Qolsys IQ Panel 4 will support PowerG in addition to one (1) legacy RF frequency. In addition to choosing a panel based on the RF frequency to be used, the user will also want to choose the panel with the built-in cellular communicator that will have the best signal strength and quality in the location where the panel will be installed. This can match the carrier for the user's cell phone, but that is not a requirement. When deciding which cellular carrier to choose, base the decision solely on cellular coverage. Billing for the panel's cellular communicator will be included in the monthly monitoring service charges.

The legacy RF frequency built-in to the IQ Panel 4 is intended to make it easy to replace an existing alarm panel from a different manufacturer. By choosing the IQ Panel 4 that supports the wireless frequency for sensors that are already installed in a location, a user can save a lot of money by not having to buy all new sensors. You get the benefit of an all new, feature-rich alarm panel without the expense, not to mention the time and trouble saved, of replacing existing sensors that still work.

Were you thinking of purchasing a Qolsys IQ Panel 2 Plus in the 319.5 MHz "flavor"? If you were, you can purchase the IQ Panel 4 instead. This panel currently has the exact same User Interface (UI) as the IQ Panel 2 Plus, so the user experience will not differ. We expect the IQ Panel 4 to get a facelift in the near future, with the end-user having the choice of whether they want to use the new interface, or stick with the legacy one. The new UI is supposed to be very similar to the Alarm.com layout. If you have any comments, please leave them below. As always, we look forward to hearing from you!