News Posts

Alarm Grid is now fully re-opened after closing yesterday due to Hurricane Dorian. The team at the main Alarm Grid Florida headquarters is now back to work answering phones and emails and activating systems. Our shipping department has also resumed processing and shipping out orders.

We know that Hurricane Dorian was a stressful experience for many people out there, us included. Many of our team members spent the past few days boarding up their homes and making preparations for family members. We are very happy that this hurricane has finally passed and that any impact in Florida has been minimal. Our thoughts go out to the people in the Bahamas whose lives have been drastically affected due to the storm.

Our Florida team would like to thank our remote team members who worked very hard to answer calls and emails in our place while we were dealing with the storm. Indeed, a lot of people contacted Alarm Grid during our absence. We apologize for any longer-than-usual wait times you may have experienced as a customer during this time. We can now assure you that it will be back to business as usual.

We would also like to thank Criticom Monitoring Services for their work during the hurricane. Our monitoring partner did a fantastic job, and all incoming signals and alarms were dealt with according to usual procedure. Remember, CMS operates three (3) separate monitoring centers across the country. Even when one monitoring center goes down, the others remain active to pick up the slack. This is very important during emergency situations like Hurricanes.

Remember, the best way to reach us at Alarm Grid for assistance is to email support@alarmgrid.com. Our team will check the email at their earliest convenience and reply back as soon as possible. You may also call us at (888) 818-7728 during our normal business hours of 9am to 8pm EST. We look forward to hearing from you. We appreciate your understanding and patience during this most recent event. The Alarm Grid team is happy to be back to work!

The Alarm Grid main headquarters in South Florida is closed due to Hurricane Dorian. At this time, only our remote offices are operational. The technicians at these remote offices will still be working to check your calls and emails. Please understand that we are short-staffed at this time.

Remember that the best way to reach us is to email support@alarmgrid.com. You may also call us at (888) 818-7728 during our business hours of 9am to 8pm EST M-F. Wait times may be slightly longer than usual due to our limited number of staff. Additionally, there may be shipping delays on certain products.

Keep in mind that our main headquarters closing does not affect your monitoring service. Our monitoring partner, Criticom Monitoring Services, operates three (3) monitoring stations. Even if one goes offline, the other two will still be there to pick up the slack. This redundancy is a major reason why we selected Criticom as our monitoring partner.

To everyone affected by Hurricane Dorian, we hope that you are safe and alright during these difficult times. We look forward to reopening our main headquarters as soon as possible. We appreciate your understanding during this time.

Update: Our plan is to re-open fully Wednesday, September 4th. We will provide an update as soon as news is available.

In observance of Labor Day, Alarm Grid is closed Monday, September 2, 2019. We will not be answering phone calls or checking support emails during this time. Any customer who needs to reach us during this time should email support@alarmgrid.com. We will reply back as soon as possible.

We would also like to use this opportunity to provide an update on Hurricane Dorian. As you may know, the main headquarters for Alarm Grid is located in South Florida. It is very likely that we will experience at least some of the effects of the hurricane. As a result, it is possible that our main headquarters may be closed Tuesday, September 3, 2019. It is impossible for us to make that determination at this time. We just want to make you aware of that possibility.

Alarm Grid has a couple of smaller offices further north in the United States that will not be affected by the hurricane. These offices will maintain business as usual Tuesday, September 3rd, regardless of what happens to our main headquarters. These technicians will still be around to answer your calls and reply to your emails. But please understand that we may be working with a limited staff. Additionally, it's possible that there may be shipping delays on orders. Again, we cannot confirm anything at this time. We are only making you aware of what might happen. We appreciate your understanding.

We also want to make it very clear that Hurricane Dorian will NOT affect your monitoring service. As you know, Alarm Grid is partnered with Criticom Monitoring Services for alarm monitoring. Criticom operates three (3) stations - one in Florida, one in California, and one in New Jersey. It is possible that the Florida station may go offline during the storm. If that happens, any incoming signals will be rerouted to one of the other monitoring centers. A central station will still be alerted to any alarm that may occur on your system, and action will be taken. This redundancy is a big reason why we chose Criticom as our monitoring partner.

Again, we are not saying that the Criticom Florida monitoring station will go offline. We are just making you aware of that possibility. And even if it does, it will have no impact on any of our monitored customers. To anyone being affected by Hurricane Dorian, we understand what you are going through. We wish you nothing but safety for yourself and your loved ones. Please stay safe and take proper precaution during this storm. We all hope to be back tomorrow to provide you with outstanding service and support. And if circumstances prevent that, we will be back as soon as possible.

If you need to reach us by phone, you can contact us at (888) 818-7728 tomorrow, Tuesday, September 3. Remember that our office hours are 9am to 8pm EST. Thank you for your support, and have a happy and safe Labor Day.

Alarm Grid is very happy to announce that the Lutron Caseta Smart Bridge PRO 2 is now available for purchase from our website. This device serves as the central hub for a Lutron Smart Lighting setup. It offers a brand-new integration with Alarm.com for added flexibility and control.

It's funny, we were just talking about Lutron the other day and how great their lighting products are. We didn't know that just a few days later we would be talking about the exciting Lutron Caseta Smart Bridge PRO 2. This hub supports all of the same great integrations and features as the original Lutron Caseta Smart Bridge. These integrations include Apple HomeKit, Amazon Alexa, Google Home, Nest, Sonos Sound, and more.

But the Lutron Caseta Smart Bridge PRO 2 adds the ability to integrate your Lutron Lights with Alarm.com. This is huge news for anyone with an Alarm.com Security System. Now you can control your Lutron devices and your security system from the super convenient Alarm.com App. You can even include your Lutron Lights with smart scenes for automatic operation based on a schedule or with certain system events!

If you are not familiar with Lutron Lights, then prepare to have your life brightened! These smart lights offer a multitude of great features that help them outshine similar products. By using the free-to-download Lutron App, you can create smart schedules to have your lights turn ON and OFF at set times of the day.

The Lutron App also supports Geofencing features to have your lights respond based on the location of your smartphone. This is great if you want to have your lights turn ON automatically when you arrive home, or shut OFF when you leave for the day. There is also a cool feature called "Smart Away" that will have your lights turn ON and OFF at random times during the evening to make it look like you are home. This is perfect for when you are traveling.

Remember, you will need a monitoring plan that includes Alarm.com if you want to integrate your Lutron Caseta Smart Bridge PRO 2 with that platform. For Alarm Grid customers, this includes any Gold or Platinum Level Plan. More information about our monitoring services is available on our alarm monitoring page.

The Lutron Caseta Smart Bridge PRO 2 is compatible with all of the existing Lutron Caseta devices that were already sold on our site. We have all the resources you need to create complete smart lighting network based around Lutron. If you have any questions about Lutron or the new Lutron Caseta Smart Bridge PRO 2, please reach out to us by emailing support@alarmgrid.com. We look forward to hearing from you!

Hi DIYers! Today, we are very excited to talk about the all-new Z-Wave Plus lighting products from Resideo. These lights are very easy to use, and they will work with nearly any security system that supports Z-Wave. They will certainly make a great addition to any growing smart home.

Resideo (formerly Honeywell and Ademco) has been long-known for their alarm control panels, sensors, and thermostats. But they really haven't made much of a splash in terms of smart lighting equipment. But that should change with these brand-new lights. The lineup has everything you need to create a robust and capable lighting setup.

All of these products use Z-Wave Plus technology to communicate with a central hub. We strongly recommend making sure your Z-Wave controller is certified for Z-Wave Plus so that you get the maximum wireless signal range. Some systems that support Z-Wave Plus include the Qolsys IQ Panel 2 Plus and the 2GIG GC3e. If you have monitoring service and access to Total Connect 2.0 or Alarm.com, then you can control your lights remotely and use them with smart scenes.

These devices are all super easy to program with your alarm system or other Z-Wave hub. When enrolling, you should always make sure to exclude the device from the network first. This will clear out any information and ensure that the device can be enrolled successfully. Then enroll the device by putting the controller into its inclusion mode and activating the inclusion function on the light. It should successfully pair with the network.

Now that you know a little bit about the lights in general, let's take a quick look at all of the new products individually:

• Resideo Z5SWITCH - An in-wall light switch that is used to control hardwired lights or a ceiling fan. Replaces the existing in-wall switch.
• Resideo Z5DIMMER - An in-wall dimmer switch that is used to control hardwired lights. The light bulbs must support dimming to be used in that manner. Replaces the existing in-wall switch.
• Resideo Z53WSWITCH - An in-wall 3-way switch that is used with the Z5SWITCH and Z5DIMMER. You can use multiple Z53SWITCH devices to achieve up to a 6-way lighting configuration. Please note that a traveler wire is required for use.
• Resideo Z5SWPID - A plug-in switch that is used for controlling a lamp or other connected device. It features a manual ON/OFF switch and a pass-through "non-Z-Wave" outlet.
• Resideo Z5DIMPID - A plug-in dimmer module that is used for controlling a lamp. The light bulbs must support dimming to be used in that manner. It features a manual ON/OFF switch and a pass-through "non-Z-Wave" outlet.
• Resideo Z5SWPIO - A plug-in switch that is suitable for outdoor use. Great for operating holiday lights or other outdoor lighting fixtures. It does not include a pass-through outlet.
• Resideo Z5OUTLET - An in-wall AC outlet that provides Z-Wave Plus control to the connected device. The bottom port uses Z-Wave Plus, while the top port is always active. Replaces an existing outlet.

All of these smart lighting products are available right now from Alarm Grid! They're great for anyone looking to create a new smart lighting network or expand upon an existing one. If you have any questions about these new Resideo Lights, please reach out to us by emailing support@alarmgrid.com. We look forward to hearing from you!

We have learned that the LYNX Connect App has been discontinued. The app can no longer be downloaded from the Apple App Store or the Google Play Store. Users wanting a second on-site option for controlling a LYNX Touch should use either a keypad or Total Connect 2.0, or upgrade to the Lyric.

The LYNX Connect App is a handy tool for many LYNX Touch users, It allows users to control a LYNX Touch System from a separate on-site device, all while enjoying the same user interface as the LYNX Touch System itself. The LYNX Touch Panel must have an L5100-WIFI Card installed and be on the same WIFI network as the device that is using the app to control the system. The app is designed for use with the L5100, L5200, L5210, and L7000 systems.

A very common application of the LYNX Connect App is to use it on a tablet that is mounted to the wall. By doing this, you can essentially have the tablet operate as a touchscreen keypad for the system. Many users find this to be a desirable option, as it is really the only way to obtain a secondary touchscreen controller for a LYNX Touch. By using a cheap tablet, you can readily establish a great secondary keypad for your system. Unfortunately, the discontinuation of the app means that this is no longer an option for many LYNX Touch users.

It turns out that all Firmware Versions 9 and higher for the LYNX Touch Systems does not work with the LYNX Connect App. In order to support the LTE communicators, a LYNX Touch System will need to be on some Firmware Revision that is higher than Firmware Version 9. The minimum Firmware Revision required depends on which LTE module you are using.

The LTE-L57A requires Firmware Revision 9.00.209 or higher, while the LTE-L57V requires Firmware Revision 9.00.201 or higher. Rather than update the app to make it compatible with the newer versions, Resideo made the decision to discontinue support. As a result, it is no longer possible to get the app for an Android or iOS device. Remember that the latest LYNX Touch Firmware Version is only available for the L5200, L5210 and L7000 Systems. If you have an L5100, then your system is running a lower Firmware Version, and it will still work with the app.

If you already have the LYNX Connect App downloaded, and your LYNX Touch System is running less than Firmware Version 9, then you can still continue to use the app. Many L5210 and L7000 users who use IP-only monitoring never upgraded to the latest Firmware Version. This is because the newer Firmware Versions only really benefit users with cellular connectivity. Just be aware that if you ever need to replace your Android or iOS device, you will not be able to re-download the app. And if you ever upgrade to Firmware Version 9 or higher on your panel, then the app will no longer work.

Remember that Firmware Version 9.00.201 or higher is needed to use the LTE-L57V, and Firmware Version 9.00209 or higher is needed to use an LTE-L57A. These updates are very important, as LTE is so crucial. If you want to replace a tablet that served as a secondary keypad using the LYNX Connect App, then you have a couple of options available. One possibility is to get a Honeywell 5828 or Honeywell 5828V Keypad. Both keypads will pair nicely with any LYNX Touch System.

You might also consider using Total Connect 2.0. This is an interactive monitoring platform that you can use to control your system from anywhere. TC2 is even more versatile and beneficial than the LYNX Connect App. This platform can be used to access the alarm system from virtually anywhere using the Total Connect 2.0 Mobile App. Since you can access it on a smartphone, many users find that it is even more convenient than setting up a second keypad.

Another option is to upgrade to the Resideo Lyric Alarm System. The Lyric has its own app called the MyHome Controller App that works in the same manner as the LYNX Connect App. The MyHome Controller app is still actively supported by Resideo, and it allows a tablet or smartphone to serve as a reliable secondary keypad. Other benefits for the Lyric include HomeKit compatibility, increased zone support, and its encrypted sensor options.

We apologize for any inconvenience that this may have caused. If you have any questions or concerns about the loss of the LYNX Connect App, or if you want to learn more about Total Connect 2.0, then we invite you to reach out to us. Our team is happy to help you determine the best replacement keypad option for your needs. The best way to contact us is by email at support@alarmgrid.com. You may also call us at (888) 818-7728 during our regular business hours of 9am to 8pm EST. We look forward to hearing from you!

Hi DIYers! We are happy to announce that the first 2GIG Encrypted Sensors are available on our site. The lineup includes two contacts, a motion, a key fob, and a glass break. Anyone with a 2GIG GC2e or 2GIG GC3e System will absolutely want to make use of these powerful new sensors.

The new 2GIG eSeries Encrypted Sensors represent perhaps the biggest selling point of the new 2GIG Alarm Systems. These sensors are designed exclusively for use with the 2GIG GC2e and 2GIG GC3e. When enrolled, they will make use of encryption in all their wireless communication. This makes these sensors virtually impervious to any wireless hacking or takeover attempts. This is the best way to ensure that your system is always protected.

It is important to note that you cannot bring these sensors over to the older 2GIG Go!Control GC2 and 2GIG GC3 Systems and expect them to work as non-encrypted wireless sensors. These new sensors can only be utilized as encrypted devices on the GC2e and GC3e Systems. However, you can bring over the older 2GIG Sensors and the Honeywell 5800 Sensors and use them with the GC2e and GC3e as standard 345 MHz sensors.

With that out of the way, let's start checking out the new encrypted sensors!

2GIG DW10e

The 2GIG DW10e is a surface-mounted door and window contact sensor. It offers a super thin profile, with dimensions of 2.59"L x 1.03"W x 0.49"D. This makes the sensor practically invisible when mounted flat on a white surface. There are two programmable loops for the DW10e. One loop will have the sensor operate as a standard contact with a reed switch. The other loop allows you to connect a single Normally Closed (NC) hardwired contact to the DW10e and have it communicate with the panel wirelessly.

2GIG DW20e

The 2GIG DW20e is a recessed door and window contact that is perfect for users who want to achieve a more aesthetically pleasing installation. The sensor and its accompanying magnet need to be inserted into holes that are drilled into the door or window and its frame. The only way to see the sensor after installation is to look at the door or window frame from the side when the door or window is already opened. The DW20e has an impressive 450-foot wireless range when used with direct line of sight.

2GIG PIR1e

The 2GIG PIR1e is a wireless PIR motion detection sensor. The device works by looking for the changes in IR energy that occur with movement. It uses a quad-element PIR sensor for superb reliability. The trustworthy and reliable motion detecting sensor offers a coverage area of 30' by 50'. This is perfect for a home or small business. There are three different sensitivity settings you can choose from. When used on low sensitivity, the device will provide pet immunity for small animals weighing up to 55 pounds.

2GIG GB1e

The 2GIG GB1e is a wireless glass break sensor. The device will effectively monitor plate, tempered, and sealed insulating glass that measures between 1/8 and 1/4 of an inch thick. The sensor listens for both the low-pitched "thud" of an object striking the glass and the higher-pitched "shattering" of the glass itself. This dual-detection process helps to ensure that false alarms do not occur. It is great for monitoring windows for forced entry, but it can also be used with protective glass casings that display products.

2GIG KEY2e

The 2GIG KEY2e is a wireless 4-button key fob that gives you a convenient way to control your GC2e or GC3e while you are on-site. There are dedicated buttons for Arming Away, Arming Stay, Disarming, and activating a relay device. You can also program a dual-button press of the top two buttons (Arm Away and Disarm) to trigger an instant panic. Any button must be held down for a full 2 seconds for the command to go through. This helps to prevent accidental inputs. It has a wireless range of 350 feet.

If you have questions about any of these new 2GIG eSeries Sensors or the 2GIG GC2e and GC3e, or if you just want to learn more about our monitoring service, please reach out to us! We are here to make sure you get the perfect equipment for your needs. The best way to contact us is always to email support@alarmgrid.com. If you want to speak by phone, you can reach us at (888) 818-7728 during our regular business hours of 9am to 8pm EST. We look forward to hearing from you!

Hi DIYers! We are happy to announce that there are new firmware updates available for the Qolsys IQ Panel 2 Plus and the 2GIG GC3e & GC3 Systems. Qolsys users can apply the firmware update locally at the panel. 2GIG users can apply from USB or have it pushed from Alarm.com for a small fee.

Qolsys IQ Panel 2 Plus Version 2.3.4

Starting with the Qolsys IQ Panel 2 Plus, Firmware Update 2.3.4 is now available. This is a relatively minor upgrade to the system that improves recognition of the PowerG daughterboard for supporting wireless PowerG Sensors. Although you can technically apply this update to an original Qolsys IQ Panel 2 System, it won't make a difference, because that system does not have a PowerG daughtercard. Since you can apply this update locally at the panel, there is no fee required to receive this update. Remember, your system must be actively monitored and connected with Alarm.com for the update to go through.

In order to apply this update, you must have your Qolsys IQ Panel 2 Plus connected to WIFI. The panel should be plugged into AC power, and it should not have a low-battery condition. To begin, start from the main screen of the system. Press the small grey bar at the top of the screen. Choose Settings > Advanced Settings> Installer Code (default 1111) > Upgrade Software > Patch Tag > enter iqpanel2.3.4 > OK > Upgrade Using Network. The system should begin downloading the update. Once the download is complete, the update will be applied. This process should take about five (5) minutes. The panel will reboot at this time. The process is complete after the reboot finishes.

2GIG GC3e & GC3 Firmware Version 3.2.3

The 2GIG GC3e System just became available very recently. This Firmware Update Version 3.2.3 is a great way to get your new GC3e System up and running. Additionally, existing users of the original 2GIG GC3 System can also apply this same update. The update provides support for the new AT&T LTE Communicator (coming soon!) and allows for 6-digit user codes with both the panel and compatible Z-Wave locks. It also provides various fixes and helps the system run smoother overall. It is recommended that every GC3e and GC3 user receives this update so that they can continue to get the most out of their system.

The easiest way to receive Firmware Version 3.2.3 is to simply have it pushed down from Alarm.com. To do this, the system must have an Alarm.com Cellular Communicator installed and activated. You must contact your alarm company and ask them to push the update. There will be a small fee for this service. If you don't have Alarm.com, you can get more information on our monitoring page. The latest update can also be applied directly at the panel. To do this, you must download the update file onto a USB flash drive and insert the drive into the panel. You will then be able to apply the update locally at no cost. More information on this process can be found in this helpful FAQ. Although that FAQ is specific to the original 2GIG GC3 System, the 2GIG GC3e will follow the same process. Remember, there is no cost required to update via USB.

If you have questions about either of these firmware updates, or if you would like to learn more about our monitoring services, please reach out to us! The best way to contact us is always to email support@alarmgrid.com. We will check your email at our earliest convenience and reply back as soon as possible. You may also call us at (888) 818-7728 during our normal business hours of 9am to 8pm EST M-F. We look forward to hearing from you and answering your questions!

Hi DIYers! We have exciting news today, as the Honeywell LTE-IA for VISTA Series Panels is now available! This has been eagerly anticipated by VISTA users with strong service from the AT&T LTE Network. We are sure that many of you will want to take advantage of this great new communicator!

As a dual-path communicator, the Honeywell LTE-IA can send signals thorough both a local IP network and a cellular network. It uses a hardwired ethernet connection for IP service, and it works across the AT&T LTE Network for cellular service. The communicator will use IP as its primary path, and cellular will serve as the backup.

Being able to connect with the AT&T LTE Network is the best feature of this communicator. AT&T has stated that they will support their LTE network well into the very distant future. The network will remain in-service even as newer networks like 5G are made available many years from now. AT&T invested huge amounts of money into their LTE infrastructure. Their LTE network is not going anywhere anytime soon. The result is that this communicator will keep your VISTA Panel monitored in the long-run.

The importance of reliable cellular backup cannot be stressed enough. Internet outages, and it is highly likely that your system will need to rely on its cellular connection at some point or another. As long as the cellular path is still available, your VISTA System will remain connected with the AlarmNet360 Servers. This means that you will still be able to take advantage of all the great features from Total Connect 2.0.

Speaking of Total Connect 2.0, a proper AlarmNet Communicator like the Honeywell LTE-IA is required if you want to use this service. If you didn't know, TC2 is an interactive monitoring and automation platform that you can access from anywhere. This is possible using the Total Connect 2.0 Mobile App on Android and iOS devices.

By accessing TC2, you can arm and disarm your system, check its status, control Z-Wave devices (Tuxedo Touch or VAM required), view TC2 Cameras (video plan needed), and more. All you need is a compatible Honeywell System with an AlarmNet Communicator, and an appropriate alarm monitoring plan.

For the VISTA P-Series Panels, the VISTA 15P, VISTA 20P, and VISTA 21iP can all support TC2. There are just some firmware requirements you need to keep in mind. A 15P or 20P must be running firmware 9.12 or higher. A 21iP must be running firmware 3.13 or higher. If you aren't sure of the firmware, just check the PROM Chip. This is a small black chip on the panel's main board. It will have a code that begins with the letters "WA". This code will tell you the firmware version.

If you find that the PROM Chip is not high enough, don't worry! We sell new 15P PROM Chips, 20P PROM Chips, and 21iP PROM Chips. Just be aware that a 15P or 20P System will need to be at least firmware 2.0 or higher to receive a PROM Chip upgrade. Any VISTA 21iP can receive a PROM Chip upgrade.

To replace the PROM Chip, start by powering down the panel by disconnecting the backup battery and unplugging the transformer. Carefully pry off the old PROM Chip with the metal end of a binder clip. Then apply the new one by putting it in the same place and pressing it down until it clicks. Just be careful not to bend the metal prongs on the new PROM Chip! You can then power up your system by plugging the transformer back in and reconnecting the backup battery.

If you actually have better service from the Verizon LTE Network than the AT&T LTE Network, you should also know that a similar Verizon LTE Dual-Path Communicator called the Honeywell LTE-IV has been available for quite some time. Remember, the service provider for your alarm system has nothing to do with the service provider for your phone. Just go with whichever service works best in your area, regardless of which service you use for your smartphone.

If you have any questions about the Honeywell LTE-IA, please reach out to us. The best way to contact us is to email support@alarmgrid.com. Another option is to call us during our normal business hours of 9am to 8pm EST M-F at (888) 818-7728. We look forward to hearing from you!

Hi DIYers! We are pleased to announce that the Interlogix Simon XTi-5i is now available for purchase from the Alarm Grid website. This is a capable wireless panel, all available at an affordable price. It is perfect for homes and small businesses looking for an effective security solution.

Although the Simon XTi-5i is considered a "budget" alarm system, it still offers the same great performance you would expect out of any modern alarm system. The system is essentially an upgrade over the current Simon XTi-5, but it has been revamped to enhance the end user experience. The 5" full-color touchscreen has been improved from the older models, and it feels more satisfying to control. We tested the touchscreen at ISC West 2019, and we gotta say, it's a major improvement.

New to the Simon XTi-5i is the ability to adjust the user interface (UI). You can have the color schemes for the system menus match those from Alarm.com. You will get the same great orange and white color scheme for the Simon XTi-5i as what you have on Alarm.com. This should help you feel more comfortable, whether you are controlling your system from the panel or from the Alarm.com Mobile App on Android and iOS devices. By using the mobile app, you can access your system from almost anywhere!

In order to access Alarm.com, you will need an Alarm.com Communicator. Both LTE cellular and dual-path options are available. Getting your Simon XTi-5i connected with Alarm.com will provide you with the most reliable alarm monitoring service possible. You will also be able to access Alarm.com through the mobile app to control your system in a variety of ways. This includes arming and disarming, checking system status, controlling Z-Wave devices, viewing Alarm.com Cameras, and more. Please note that you will need a Self Gold Plan or higher from Alarm Grid to access Alarm.com, and a Self Platinum level plan or higher is required for remote viewing of Alarm.com cameras. More information can be found on our alarm monitoring page.

The Simon XTi-5i will actually support the same communicators as all of the previous Simon Panels. We recommend using one of the following communicators:

• Alarm.com XT-511-US-AT (AT&T LTE)
• Alarm.com XT-511-US-VZ (Verizon LTE)
• Alarm.com XT-511-CA-TL (Telus LTE - Canada Only)
• Alarm.com XT-511-US-DP-AT (AT&T LTE & IP)
• Alarm.com XT-511-US-DP-VZ (Verizon LTE & IP)
• Interlogix 600-1048-XT-LTE-AT (AT&T LTE) (Must be FW 191C or higher)
• Interlogix 600-1048-XT-LTE-VZ (Verizon LTE) (Must be FW 191C or higher)
• Interlogix 600-1048-XT-LTE-TL (Telus LTE - Canada Only) (Must be FW 191C or higher)

Each of these communicators also doubles as a perfectly functional Z-Wave controller. This will allow you to start building a complete smart home network of Z-Wave devices. You can create scenes to have your Z-Wave devices activate automatically with certain system events or on a set schedule. This can definitely help you save money on energy costs and make your life more convenient. There are all sorts of Z-Wave devices you can add, including lights, locks, thermostats, water valves, and more!

In addition to a better touchscreen and revamped menus, the Interlogix Simon XTi-5i also packs some more power under the cover. The zone count has doubled up to 80 wireless zones. This is perfect for virtually any home or any small to medium sized business. You can even use two (2) hardwired Normally Closed (NC) contacts with the system and connect them to the main board. Just be aware that these hardwired contact sensors will still cut into the maximum 80 zone limit.

As far as sensor support goes, the Simon XTi-5i facilitates the same great 319.5 MHz sensors that its predecessors supported. This includes the wireless sensors from Interlogix and Qolsys. You can also use the Qolsys S-Line Sensors with the system, though they will not utilize encryption with the Simon XTi-5i. If you want encrypted sensors for the system, you will have to wait for the exclusive lineup of Interlogix Encrypted Sensors, which should be made available soon. It is unknown which form of encryption these sensors will utilize, but it is expected that they will work exclusively with the Interlogix Simon XTi-5i System.

You can now purchase the Interlogix Simon XTi-5i from Alarm Grid! If you have any questions about this exciting new system, please reach out to us! The best way to contact us is to email support@alarmgrid.com. We will check your email at our earliest convenience and respond back as soon as possible. If you prefer to call us, you can reach us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F. We look forward to hearing from you and telling you all about this great new panel!