Honeywell 5800PIR-OD Posts

Last week, we took a look at three of the best alarm panels in the industry. These were the Honeywell Lyric, the Qolsys IQ Panel 2 Plus, and the 2GIG GC3e. Today, we are checking out the sensors that you can add to support these systems. Here is our 2020 Security Sensor Buying Guide!

Sensors are accessories that are added to alarm systems to report specific activity. Each sensor has its own job of looking for a certain type of activity in its designated location. All of the sensors on a system communicate with a single centralized panel or hub. This panel is actively listening for any sensor that is triggered due to a potentially important system event. Adding new sensors is perhaps the best way to expand upon an existing system, and they make awesome gifts and stocking stuffers for the security enthusiast in your life.

Broadly speaking, sensors can be split into two main categories, which are security and life safety/environmental. Security sensors look for activity that suggests potentially unauthorized entry into a monitored and protected location, such as a door being opened, movement in a room where nobody is supposed to be present, or a window being broken. Life safety/environmental sensors look for activity associated with unwanted or potentially harmful conditions that affect the well-being of those in the area, such as a flood, an extreme temperature, a fire, or the presence of CO gas. We'll be taking a look at life safety/environmental sensors another time. Today, our focus is on security sensors.

Wireless Sensor Basics

Before we dive into specific security sensors for our top panel picks, we're going to start by giving you some general, generic information that can be applied to any sensor out there. First, understand that this post is focusing only on wireless sensors. These are almost always the sensors chosen for use with wireless alarm systems. Wired sensors can also technically be used with wireless panels but a converter module is almost always needed. Not to mention the fact that wireless sensors are significantly easier to install, especially for DIY users. The only time you will realistically see wired sensors used with a wireless panel is if a user is upgrading from an older wired system and bringing over their old wired sensors, or in new construction where a user wants to integrate the sensors in with the building. But if you're expanding upon a wireless system by getting new sensors, then the new sensors will almost certainly be wireless.

The important thing to remember when choosing wireless sensors for a wireless alarm panel is making sure the sensor is compatible with the system. It doesn't matter if a sensor has all the specs and features if it doesn't work with your panel! The way to determine compatibility is to look at the lineup that the sensor is from. Petty much every wireless sensor out there is part of a larger grouping of sensors that will all have the same compatibility.

To make it easier for you, we have the three panels we mentioned before (well, make that five, as the Qolsys IQ Panel 2 Plus actually comes in three versions), and all their compatible sensor lineups conveniently listed. We hope that this sheds some light on your options. The only caveat is that for any panel listed here that supports the Honeywell 5800 Sensors, we must be clear that this is only for the uni-directional sensors with one-way communication in the lineup. Any bi-directional Honeywell 5800 Sensors with two-way communication will not work with any of the aforementioned systems. The bi-directional Honeywell 5800 Sensors are only compatible with the Honeywell LYNX Touch and VISTA Systems, which were not included in our buying guides.

With that out of the way, here are compatible sensor lineups by system:

• Honeywell Lyric - Honeywell SiX Series, Honeywell 5800 Series, 2GIG 345 MHz Series
• 2GIG GC3e - 2GIG eSeries Encrypted Sensors, 2GIG 345 MHz Series, Honeywell 5800 Series
• Qolsys IQ Panel 2 Plus 319.5 MHz - DSC PowerG Sensors, Qolsys S-Line Sensors, Qolsys Legacy 319.5 MHz Sensors, Legacy Interlogix Sensors, Legacy GE Sensors
• Qolsys IQ Panel 2 Plus 345 MHz - DSC PowerG Sensors, Honeywell 5800 Sensors, 2GIG 345 MHz Sensors
• Qolsys IQ Panel 2 Plus 433 MHz - DSC PowerG Sensors, Legacy DSC 433 MHZ Sensors

You will notice that some of the sensor groups listed above are italicized and underlined. That is done to identify the lineups of encrypted sensors. These encrypted sensors have special protection measures put in place to make them more secure and less prone to being hacked or defeated by malicious attacks. Encrypted sensors tend to have more restricted compatibility. They may follow a special enrollment process. Encrypted sensors often use bi-directional communication so that the sensor knows that it is actively paired with the system. Many encrypted sensors may only be paired with a single system at any given time, and the sensor will need to be deleted from its existing system before it will work with a new one.

It's okay to use non-encrypted sensors with your system, especially in zones that are less likely to trigger an alarm, like a second story window. Many users will opt to use a mixture of both encrypted and non-encrypted sensors. Other users feel comfortable using entirely non-encrypted sensors. It really comes down to your level of comfort. Non-encrypted sensors are secure in most situations, and they are still tricky to defeat. But going fully encrypted is recommended for anyone seeking maximum security. One tip if you do decide to go with some non-encrypted sensors is to avoid letting others know what wireless frequency your sensors use or what type of system you have installed. Knowing the frequency and the system being used makes it much easier for a savvy intruder to defeat a sensor.

Door & Window Alarm Sensors

Now that you know some basics that apply to almost all wireless sensors, let's start talking about specific types and models. Door and window sensors will let a system know when a door or window has been opened or closed. These are some of the most basic and easy to use sensors on a security system. These devices work by using a larger sensor portion and a smaller magnet portion. The sensor is placed on or inside the door or window frame, and the magnet is placed on or inside the moving portion of the door or window. When the door or window is opened, the magnet will move away from the sensor. This will trip a metal reed switch inside the sensor, which will tell the sensor to alert the system to the opened door or window. All of the sensors we've listed here follow that same method of operation.

Door and window sensors can be split into two (2) main categories. Surface-mount door and window sensors are mounted outside the door or window and its accompanying frame on the surface. The advantage to surface-mount door and window sensors is that they are very easy to install, and they can usually be mounted using double sided foam tape. But some users may not like how they are visible on the outside of the door or window. If you don't like the appearance of visible surface-mount door and window sensors, then you might instead consider recessed door and window sensors. A recessed door or window sensor is installed inside a door or window and its frame, so that it is hidden and cannot be seen from the outside. Recessed door and window sensors are more difficult and time-consuming to install, because you must drill holes in both the door or window and its accompanying frame. Whether you decide to use surface-mount door and window sensors, or recessed door and window sensors is up to you. Most DIY users and Alarm Grid customers in general will use surface-mount door and window sensors.

Now let's look at some door and window sensors.:

Sensor Name	Product Lineup	Compatibility	Range	Encryption	Installation	Notes
Honeywell SiXMINICT	Honeywell SiX Series	Lyric	200 Nominal Feet	128-bit AES	Surface-Mount	Premier mini encrypted door/window Sensor for Lyric.
DSC PG9303	PowerG	All IQ Panel 2 Plus	2,000 Feet Open Air	128-bit AES	Surface-Mount	PowerG encrypted surface mount door/window sensor.
DSC PG9307	PowerG	All IQ Panel 2 Plus	2,000 Feet Open Air	128-bit AES	Recessed	PowerG encrypted recessed door/window sensor.
2GIG DW10e	2GIG eSeries	2GIG GC3e	350 Nominal Feet	2GIG eSeries Encryption	Surface-Mount	Encrypted surface-mount sensor for 2GIG
2GIG DW20e	2GIG eSeries	2GIG GC3e	350 Nominal Feet	2GIG eSeries Encryption	Recessed	Encrypted recessed sensor for 2GIG
Qolsys IQ DW Mini-S	Qolsys S-Line	319.5 MHz IQ2+	600 Feet Open Air	Qolsys S-Line Encryption	Surface-Mount	Encrypted surface-mount sensor for 319.5 MHz systems.
Qolsys IQ Recessed Door-S	Qolsys S-Line	319.5 MHz IQ 2+	600 Feet Open Air	Qolsys S-Line Encryption	Recessed	Encrypted recessed sensor for 319.5 MHz systems.
Honeywell 5818MNL	Honeywell 5800 Series	Lyric, GC3e, 345 MHz IQ2+	200 Nominal Feet	None	Recessed	Non-Encrypted recessed door/window sensor for 345 MHz systems.
VERSA-2GIG	2GIG 345 MHz	Lyric, GC3e, 345 MHz IQ2+	200 Nominal Feet	None	Surface-Mount	Non-encrypted surface-mount sensor for 345 MHz systems.
VERSA-GE	Legacy GE	319.5 MHz IQ2+	200 Nominal Feet	None	Surface-Mount	Non-encrypted surface-mount sensor for 319.5 MHz systems.
VERSA-DSC	Legacy DSC	433 MHz IQ2+	200 Nominal Feet	None	Surface-Mount	Non-encrypted surface-mount sensor for 433 MHz systems.

We also want to share a selection of outdoor door and window sensors with you. These surface-mount contact sensors are specifically designed to withstand the conditions of an outdoor environment, including intense rain, wind, dust, and sunlight. You can see them listed below.

Sensor Name	Product Lineup	Compatibility	Range	Encryption	Installation	Notes
Honeywell 5816OD	Honeywell 5800 Series	Lyric, GC3e, 345 MHz IQ2+	200 Nominal Feet	None	Surface-Mount	Outdoor contact sensor from 5800 Series.
DSC PG9312	PowerG	All IQ Panel 2 Plus	2,000 Feet Open Air	128-bit AES	Surface-Mount	PowerG Outdoor Contact Sensor.
2GIG DW30-345	2GIG 345 MHz	Lyric, GC3e, 345 MHz IQ2+	350 Nominal Feet	None	Surface-Mount	Outdoor contact sensor from 2GIG 345 MHz series.

Motion Sensors

Motion sensors use passive infrared (PIR) technology to detect movement within the sensor's coverage area. This is done by looking for the changes in infrared (IR) energy that occur when a person, animal, or object comes within the sensor's field of view. Standard motion sensors are typically PIR only. These are appropriately called PIR motion sensors.

Some motion sensors will also use microwave technology in addition to PIR technology. This involves having the sensor send out microwave signals and seeing how the signals bounce off of objects in the area. Movement will change the pattern of these microwave signals, and the sensor will be able to detect this. These motion sensors that use both microwave and PIR are called Dual-Tech motion sensors. The purpose of using both PIR and microwave together is to prevent false alarms. A Dual-Tech motion sensor will only activate and alert the system if both its PIR sensor and its microwave sensor are triggered. A microwave sensor is not vulnerable to the same environmental issues that may cause a false activation on a PIR. You will not find a motion sensor that uses microwave technology without PIR detection, as microwave alone would result in too many false alarms without having PIR to confirm movement.

One feature that you will often see listed on a motion sensor is pet-immunity. A motion sensor that has been set up for pet immunity can be configured to not "look" in the areas close to the ground where pets and small animals walk. Instead, the motion sensor only looks in the areas higher up, where humans move while walking upright. A pet immune motion sensor is not impervious to small animals, and you must position it carefully so that it works as intended. Pet immune motion sensors normally have a weight limit, where animals under that weight limit should avoid triggering the sensor, assuming that the sensor is installed properly. Please note that most pet friendly motion sensors will require you to set the sensitivity for the sensor to the lowest possible setting.

When it comes to motion sensors, mounting them carefully is very important. A motion sensor may cause false alarms on the system if it is not installed properly. These sensors should not be facing any vents, air ducts, ceiling fans, or curtains that may cause the sensor to activate without any movement. If you are using the motion sensor for pet immunity, then it should also not be facing any furniture or stairwells that your pet could use to get within the sensor's field of view. You will likely want to perform a Walk Test of your motion sensor to make sure that it responds properly when movement is present, and does not respond due to other external factors when there is no movement. You should also have any pets participate in the Walk Test to ensure that pet immunity is working properly.

We recommend reading the following FAQs to learn more about motion sensors:

• What is a PIR Motion Sensor?
• What are Microwave Motion Sensors?
• What is a Pet-Immune Motion Sensor?

Below are some of the most popular motion sensors for our recommended systems:

Sensor Name	Product Lineup	Compatibility	Range	Encryption	Coverage Area	Detection Type	Pet Immunity	Notes
Honeywell SiXPIR	Honeywell SiX Series	Lyric	300 Nominal Feet	128-bit AES	40 by 56 Feet	PIR	Up to 80 lbs	Encrypted PIR Motion for Lyric.
DSC PG9914	PowerG	All IQ Panel 2 Plus	2,000 Feet Open Air	128-bit AES	Up to 39 Feet	PIR	Up to 85 lbs	PowerG Encrypted PIR Motion.
DSC PG9984P	PowerG	All IQ Panel 2 Plus	2,000 Feet Open Air	128-bit AES	Up to 50 Feet	Dual-Tech	Up to 40 lbs	PowerG Encrypted Dual-Tech Motion.
2GIG PIR1e	2GIG eSeries	2GIG GC3e	350 Nominal Feet	2GIG eSeries Encryption	30 by 50 Feet	PIR	Up to 55 lbs	Encrypted PIR Motion for 2GIG.
Honeywell 5800PIR-RES	Honeywell 5800 Series	Lyric, GC3e, 345 MHz IQ2+	200 Nominal Feet	None	35 by 40 Feet	PIR	Up to 80 lbs	Non-encrypted residential PIR motion for 345 MHz systems.
Honeywell 5800PIR-COM	Honeywell 5800 Series	Lyric, GC3e, 345 MHz, IQ2+	200 Nominal Feet	None	60 by 80 Feet	PIR	None	Non-encrypted commercial PIR motion for 345 MHz systems.
Honeywell 5898	Honeywell 5800 Series	Lyric, GC3e, 345 MHz IQ2+	200 Nominal Feet	None	35 by 40 Feet for Pet Immunity	Dual-Tech	Up to 100 lbs	Non-encrypted Dual-Tech motion for 345 MHz systems.
Qolsys IQ Motion-S	Qolsys S-Line	319.5 MHz IQ2+	600 Feet Open Air	Qolsys S-Line Encryption	30 by 40 Feet	PIR	Up to 40 lbs	Non-encrypted PIR motion for 319.5 MHz systems.

There are also certain outdoor motion detection sensors that are better-suited for use in an outdoor environment. These outdoor motion sensor models are typically more expensive than indoor variants. You can see some of our most popular ones listed below:

Sensor Name	Product Lineup	Compatibility	Range	Encryption	Coverage Area	Detection Type	Pet Immunity	Notes
DSC PG9994	PowerG	All IQ Panel 2 Plus	2,000 Feet Open Air	128-bit AES	Up to 30 Feet	PIR	Up to 40 lbs	PowerG Outdoor PIR Motion Sensor
Honeywell 5800PIR-OD	Honeywell 5800 Series	Lyric, GC3e, 345 MHz IQ2+	200 Nominal Feet	None	40 by 30 Feet	PIR	None	Honeywell 5800 Series Outdoor Motion, 1st ed.
Honeywell 5800PIR-OD2	Honeywell 5800 Series	Lyric, GC3e, 345 MHz IQ2+	200 Nominal Feet	None	40 by 30 Feet	PIR	None	Honeywell 5800 Series Outdoor Motion, 2nd ed.
Optex FTN-RRIX	Legacy Interlogix	319.5 MHz IQ2+	200 Nominal Feet	None	Up to 16.5 Feet	PIR	None	Optex Fitlink Outdoor Motion Sensor for 319.5 MHz Systems
Optex FTN-RR2G	2GIG 345 MHz	Lyric, GC3e, 345 MHz IQ2+	200 Nominal Feet	None	Up to 16.5 Feet	PIR	None	Optex Fitlink Outdoor Motion Sensor for 345 MHz Systems.
Optex FTN-RRDS	Legacy DSC	433 MHz IQ2+	200 Nominal Feet	None	Up to 16.5 Feet	PIR	None	Optex Fitlink Outdoor Motion Sensor for 433 MHz Systems.

Glass Break Sensors

The last type of security sensors we will be discussing are glass break sensors. These sensors include built-in microphones, and they actively listen for the unique sound of glass breaking. Most of these sensors will need to hear both the high-pitched shattering sound of the glass breaking, as well as the low-pitched sound of an object striking against the glass in order to activate. This design choice is to prevent false alarms caused by similar sounds. Most users will use glass break sensors to monitor windows, but they have also been known to work effectively on protective glass display cases that store valuables, such as what you might find in jewelry stores or gun shops. Most types of glass will work with glass break sensors, though there are some exceptions. For example double and triple pane glass windows won't work reliably. The same is true for coated or "safety" glass. Refer to the manual for the exact glass break detector you are using to determine compatibility.

A single glass break detector can monitor multiple windows or display cases, as long as the glass it is monitoring is within its detection range, which is typically 15 to 25 feet. Any glass that is being monitored must have a direct line of sight with the sensor, with no obstacles blocking the path that sound will travel through. When testing your glass break sensors, it is strongly recommended that you us a glass break simulator. These devices will mimic the sound of the glass breaking and activate your glass break sensors without actually breaking any glass. Remember to refer the instructions of your glass break simulator for more information. When choosing a glass break simulator, it is best to use a simulator from the same manufacturer, if possible. We have a Honeywell Glass Break Simulator and a DSC Glass Break Simulator available on our website. If you get one of the 2GIG Glass Break Sensors mentioned in this buying guide, then the Honeywell Glass Break Simulator is best for testing. Otherwise, just match the manufacturer.

• Honeywell FG701 Glass Break Simulator
• DSC AFT-100 Glass Break Simulator

Below are some of our most popular glass break sensors:

Sensor Name	Product Lineup	Compatibility	Range	Encryption	Notes
Honeywell SiXGB	Honeywell SiX Series	Lyric	300 Nominal Feet	128-bit AES	SiX Series Glass Break Sensor for Lyric
DSC PG922	PowerG	All IQ Panel 2 Plus	2,000 Feet Open Air	128-bit AES	PowerG Glass Break Sensor
2GIG GB1e	2GIG eSeries	2GIG GC3e	350 Nominal Feet	2GIG eSeries Encryption	Encrypted glass break sensor for 2GIG.
Honeywell 5853	Honeywell 5800 Series	Lyric, GC3e, 345 MHz IQ2+	200 Nominal Feet	None	Non-encrypted glass break sensor for 345 MHz systems.
Qolsys IQ Glass-S	Qolsys S-Line	319.5 MHz IQ2+	600 Feet Open Air	Qolsys S-Line Encryption	Encrypted glass break sensor for 319.5 MHz systems.

Reach Out to Us!

Remember that you can reach out to us with any questions you might have about planning your system and determining sensor compatibility. The best way to contact us is to email support@alarmgrid.com. This is also a good email to use if you are interested in starting new alarm monitoring service with Alarm Grid. Our team checks for new email from 9am to 8pm ET M-F. We look forward to hearing from you!

A great way to build out your Honeywell Lyric is with Honeywell 5800 Sensors. These are simple, 345 MHz wireless sensors that you can easily enroll with the system for security, life-safety, and environmental monitoring. They are perfect for expanding your system and making it more robust.

When you want to pair a Honeywell 5800 Sensor with the Lyric, the process is very straightforward. Put the Lyric in its auto-enrollment mode by choosing Security > Tools > enter Installer Code (default 4112) > Program > Zones > Add New > Serial Number. Make sure the RF Type on the right-hand side is set to 5800. Then activate the sensor either by faulting it or triggering its cover tamper switch. The Lyric should beep to confirm that it received a signal transmission. Then activate the sensor a second time to have the Lyric display the Serial Number. The third activation will confirm the Serial Number and return you to the screen where you can configure the zone settings.

Programming the zone settings for the sensor is actually quite simple. Depending on how you enrolled the sensor, you may need to adjust the Loop Number. This is almost always the case if you enrolled the sensor by activating its tamper switch. Refer to the instruction manual for the 5800 Sensor to determine which Loop Number to use.

The two (2) Zone Descriptors and the Device Type serve as the name for the sensor. You should choose a name that will help you identify the sensor, e.g. "Front Bedroom Motion Sensor", "South Hallway Door", etc. The Response Type determines how the system responds when the sensor is faulted. See our list of Lyric Response Types for more info.

Alarm Report should be set to Yes if you want the system to report out through AlarmNet to a Central Station if the zone causes an alarm on the system. That is an essential component of alarm monitoring services. Chime is optional, and it has the panel emit any one of several available sounds when the zone is faulted. Supervision tells the panel to look for an RF check-in signal from the sensor periodically to ensure that it is online. Click Save in the bottom-right after you finish adjusting the settings.

Keep in mind that only uni-directional (one-way) sensors from the Honeywell 5800 Series can be used with the Lyric. This leaves out bi-directional devices like the Honeywell 5800WAVE Siren, the Honeywell 5828 Keypad, and the Honeywell 5800RL Relay Module, so make sure you do not buy those for the Lyric. But you still have a lot of excellent sensors and security devices to choose from.

Below is a list of the Honeywell 5800 Sensors that you can use with the Honeywell Lyric:

Sensor Name	Notes
Honeywell 5800MINI	Door/Window sensor. Uses Loop 1.
Honeywell 5800PIR-RES	PIR motion sensor. Uses Loop 1. Coverage Area: 35' x 40'
Honeywell 5816	Door and window sensor. Loop 1 = Terminal Block for NC Contact Loop 2 = Reed Switch
Honeywell 5811	Door and window sensor. Uses Loop 1.
Honeywell 5800C2W	9-zone wired to wireless converter. Allows hardwired sensors to communicate with the Lyric as wireless devices. All zones use Loop 1 and a unique Serial Number ID.
Honeywell 5800CO	Carbon monoxide sensor. Loop 1 = CO Detection Loop 2 = End of Sensor Life (separate programming only required on TURBO and other V-Plex panels)
Honeywell 5800COMBO	Combination, smoke, heat, CO, and low-temperature sensor. Uses up to five (5) zones on the Lyric Panel. Has two (2) Serial Numbers for enrollment purposes. Loop 1, SN 1 = Smoke/Heat Detection Loop 2, SN 1 = Smoke/Heat Maintenance Loop 3, SN 1 = Low Temperature Detection Loop 1, SN 2 = CO Detection Loop 2, SN 2 = End of Sensor Life (separate programming required only on TURBO and other V-Plex panels)
Honeywell 5800FLOOD	Flood and temperature sensor. Loop 1 = Low Temperature Detection Loop 2 = High Temperature Detection Loop 3 = Flood Detection
Honeywell 5800MICRA	Recessed window sensor. Uses Loop 1.
Honeywell 5800PIR	PIR motion sensor. Loop 1 = Low Sensitivity Motion. Loop 2 = High Sensitivity Motion. Loop 3 = Low Temperature Detection Coverage Area: 35' x 40'
Honeywell 5800PIR-COM	Commercial PIR motion sensor. Loop 1 = Low Sensitivity Motion Loop 2 = High Sensitivity Motion Loop 3 = Low Temperature Detection Coverage Area: 60' x 80'
Honeywell 5800PIR-OD	Outdoor PIR motion sensor. Uses Loop 1.
Honeywell 5800PIR-OD2	Outdoor PIR motion sensor. Uses Loop 1.
Honeywell 5800RP	Wireless repeater for Honeywell 5800 Sensors. Does not require enrollment, but can be assigned a single zone for RF supervision, low-battery, AC loss, and RF jam detection. This is done using Serial Number 1 with Loop 1, with DIP Switch 2 set in the OFF position. Can also use up to four (4) separate zones for supervision when DIP Switch 2 is set to ON. This is required for UL installations.
Honeywell 5800RPS	Recessed door/window sensor. Uses Loop 1.
Honeywell 5800SS1	Shock sensor. Uses Loop 1.
Honeywell 5802MN	Medical alert button. Uses Loop 1.
Honeywell 5802MN2	Medical alert button. Uses Loop 1.
Honeywell 5802WXT	Panic button. Uses Loop 1.
Honeywell 5802WXT-2	Panic button. Uses Loop 1.
Honeywell 5806W3	Smoke detector. Uses Loop 1.
Honeywell 5808W3	Smoke and heat detector. Loop 1 = Smoke & Heat Detection Loop 3 = Low Temperature Detection
Honeywell 5809	Fixed temperature and rate-of-rise heat detector. Uses Loop 1. Alarm occurs when the temperature exceeds 135 degrees Fahrenheit, or when the temperature rises more than 15 degrees Fahrenheit per minute.
Honeywell 5809FXT	Fixed temperature heat detector. Uses Loop 1. Alarm occurs when the temperature exceeds 135 degrees Fahrenheit.
Honeywell 5809SS	Fixed temperature and rate-of-rise heat detector. Uses Loop 1. Alarm occurs at 135 degrees Fahrenheit or when the temperature rises more than 15 degrees Fahrenheit per minute.
Honeywell 5814	Door and window sensor. Uses Loop 1.
Honeywell 5815	Door and window sensor. Loop 1 = Terminal Block for NC Contact Loop 2 = Reed Switch
Honeywell 5816MN	Door and window sensor. Loop 1 = Terminal Block for NC Contact Loop 2 = Reed Switches
Honeywell 5816OD	Outdoor door and window sensor. Loop 1 = Terminal Block for NC Contact Loop 2 = Reed Switch
Honeywell 5817	Three (3) zone door and window sensor & transmitter. Loop 1 = NC or NO (DIP Switch Selectable) unsupervised. It does not use an End of Line Resistor (EOLR) Loop 2, 3 = NC Only. Both are unsupervised with no EOLR used
Honeywell 5817CBXT	Three (3) zone commercial transmitter. Loop 1 = Two (2) Terminals; Primary Loop supervised by 470k Ohm (yellow, purple, yellow, gold) EOLR. Resistor must ALWAYS be installed, even if Loop 1 is not programmed. If Loop 1 is used as a burglary zone, then Loop 4 must be programmed as a separate zone for Cover Tamper protection. Loop 2 = NC Reed Switch Loop 3 = Two (2) Terminals; NC Loop unsupervised, no EOLR required
Honeywell 5817XT	Three (3) zone door and window sensor & transmitter. Loop 1 = NC or NO (DIP Switch Selectable) unsupervised with no EOLR required Loop 2, 3 = Two (2) Terminal Blocks, NC Only
Honeywell 5818MNL	Recessed door and window sensor. Uses Loop 1. Not suitable for use in metal doors
Honeywell 5819	Three (3) zone shock processor. Loop 1 = NC for Inertia Style External Shock Sensor. This input provides a suitable fast loop response of from 1ms to 20ms, based on dip switch setting Loop 2 = Reed Switch Loop 3 = NC for Wired Contact, unsupervised with no EOLR required
Honeywell 5819S	Shock sensor and contact sensor. Loop 1 = Built-in Inertia Style Shock Sensor Loop 2 = Reed Switch Loop 3 = NC for Wired Contact
Honeywell 5819WHS	Three (3) zone shock processor. Loop 1 = NC, Built-in Inertia Style Shock Sensor Loop 2 = Reed Switch Loop 3 = NC for Wired Contact
Honeywell 5820L	Slimline door and window sensor. Uses Loop 1.
Honeywell 5822T	Garage tilt sensor. Loop 1 = NC for Wired Contact, unsupervised, no EOLR used Loop 3 = Tilt Switch
Honeywell 5834-2	Two (2) button key fob. Dual-button inputs allowed. Uses three (3) loops total, for a possible three (3) inputs. Can only be used with the Lyric in Low-Security Mode (Green LED)
Honeywell 5834-4	Four (4) button key fob. Dual-button inputs allowed. Uses two (2) Serial Numbers, which both use Loops 1, 2, 3, 4. Up to eight (8) inputs possible. Can only be used with the Lyric in Low-Security Mode (Green LED)
Honeywell 5834-4EN	Four (4) button key fob. Dual-button inputs allowed. Uses two (2) Serial Numbers, which both use Loops 1, 2, 3, 4. Up to eight (8) inputs possible. Can only be used with the Lyric in Low-Security Mode (Green LED)
Honeywell 5853	Glass break sensor. Uses Loop 1.
Honeywell 5869	Commercial panic switch. Uses Loop 1. Latches when tripped, key (provided) needed to reset it after it is tripped
Honeywell 5878	Six (6) button key fob. Uses two (2) Serial Numbers, which both use Loops 1, 2, 3, 4. Up to eight (8) inputs possible.
Honeywell 5898	Dual-tec motion sensor. Loop 1 = Low Sensitivity Motion Sensor. Pet immunity is available for this loop. 50lb or 100lb pet immunity, selectable via DIP Switch 1 Loop 2 = High Sensitivity Motion Sensor. Loop 3 = Temperature Sensor (High or Low, DIP Switch Selectable)

Resideo (formerly Honeywell) has made a change to Total Connect 2.0 that now prevents Sensor Activity for motion sensors from being displayed in the Activity Log. The purpose of this change is to prevent the TC2 Activity Log from being flooded with "Sensor Open" events from motions.

If you aren't aware, the Activity Log on Total Connect 2.0 shows various activity affecting a Honeywell Security System. This includes sensor open and close events. Previously, motion sensor activity (namely, the sensor detecting movement) could be displayed in this Activity Log. However, Resideo found that many users had setup activity logs for motion zones without realizing what the feature really did. They were therefore flooding their TC2 Activity with "Sensor Open" and "Sensor Close" events as they walked around their property in the disarmed state.

To curb this issue, Resideo has disabled the Sensor Activity toggle switch on Total Connect 2.0 for all motion detection sensors with the Response Type of Interior Follower. This makes it impossible to enable Sensor Activity logging for motion sensors with the Interior Follower Response Type, meaning that motion sensor activity will no longer be displayed in the activity log. In addition, the sensor will not be displayed on the TC2 security card when faulted. The user must access the Sensors List to see the faulted motion sensor zone.

Most users will likely not mind this, as they wouldn't want to have the activity logs for their systems constantly being flooded with motion sensor activity. And fortunately, there are a couple of workarounds for this issue if you do want to be alerted regarding motion sensor activity on a particular sensor. Arguably the easiest solution is to change the Response Type for a motion sensor from Interior Follower to Interior w/ Delay.

The similar Response Type of Interior w/ Delay does not have the same restriction regarding Activity Logs as Interior Follower. The only major change with Interior w/ Delay is that it will always trigger an Entry Delay countdown, rather than an immediate alarm if the motion sensor is the first zone faulted while the system is in an Armed Away state. For more information on Honeywell System Response Types, please see this helpful FAQ.

Another option if you just want to be notified regarding sensor activity is to manually create a notification for the Interior Follower Motion Sensor within Total Connect 2.0. Luckily, we recently made an FAQ that outlines this very process. It will teach you all about text and email notifications for Total Connect 2.0. If you want to take a look, you can check it out here. We also recommend checking out this other guide that is more specific to Sensor Open/Close and Sensor Left Open Notifications.

If you are an Alarm Grid monitored customer and you need any additional help setting up your motion sensor for alerts, please reach out to us by emailing support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

With a new year comes reduced pricing on many of our great existing products. We have just dropped the prices on 73 of our existing offerings. You can certainly find something great to upgrade your existing system or use with a new installation. Let's check out these awesome products!

Before we go through and list each and every reduced price product, we figured we'd go through and talk about some of the ones that excite us the most. After all, sorting through a list of 73 products is pretty daunting. Our initial "best-of" list may help you find exactly what you're looking for. These products are great if you have an existing system, or if you are building a new system and want to add some cool accessories.

These products are presented in alphabetical order:

Alarm.com ADC-V723 Outdoor Camera

The ADC-V723 is the current flagship outdoor security camera for use with the Alarm.com platform. This simple, yet powerful camera makes the perfect addition to any home or small business. It can capture video at up to 1080p quality, and it makes use of High Dynamic Range (HDR) to improve image depth and luminosity.

Alarm.com T2000 Smart Z-Wave Thermostat

If you are still looking for a smart Z-Wave thermostat, then the ADC-T2000 is an outstanding entry-level option. It conveniently wires in place of your existing thermostat to give you smart control over your HVAC system. It can pair nicely with both the Alarm.com and Total Connect 2.0 platforms. You just need a compatible Z-Wave hub to get started.

DSC PG9312 Outdoor Door/Window Sensor

The DSC PG9312 is the premier outdoor contact sensor for any user with a PowerG-compatible security system. It offers a maximum magnet spacing gap of 1.75", which gives you more flexibility in choosing a location for the sensor and magnet. Like all PowerG Sensors, it offers a wireless range of up to 2 km away from the panel, as well as 128-bit AES encryption.

DSC PG9914 Motion Sensor

Anyone with a PowerG Security System looking to add a basic indoor motion sensor should turn to the DSC PG9914. This is a simple, yet effective motion sensor that is great for use in nearly any home or business. It offers a modest coverage area of 39 feet, and the sensor provides pet immunity for small animals weighing up to 85 lbs.

Encore FireFighter FF345 Smoke/CO Listening Module

The Encore FireFighter FF345 is perfect if you have existing high-voltage smoke detectors that you want to integrate into a 345 MHz wireless system. The module can detect both the Temporal 3 sound of an activated smoke detector and the Temporal 4 sound of an activated CO detector. And if your high-voltage devices are one-go-all-go, then a single FF345 can takeover your entire network.

Honeywell 5822T Garage Door Tilt Sensor

Also for 345 MHz system users, the Honeywell 5822T allows your system to monitor your garage door to see if it's opened or closed. This wireless sensor works great for security and automation purposes alike. You might even create a special smart scene that activates as soon as the 5822T detects that you garage door has been opened!

Honeywell IPCAM-WIC1 Indoor Camera

The Honeywell IPCAM-WIC1 Indoor Camera is for anyone with an existing Total Connect 2.0 Video Monitoring service plan that they want to expand upon. This is a simple and straightforward camera that captures video at up to 720p quality. It can be easily rested on a desk or table, and no hard-mounting is required.

Qolsys IQ DW MINI-S Door/Window Sensor

The Qolsys IQ DW MINI-S can be used by anyone with a 319.5 MHz wireless system, including the Qolsys IQ Panel 2 Plus w/ Legacy Interlogix & Qolsys Daughtercard. This is a straightforward door and window contact sensor that makes a nice addition to any compatible system. Its small and compact design allows for a tidy installation.

Please see our complete list of reduced price products in the table below, organized by product type:

If you have any questions about these products or any of the other products on our site, including product compatibilities, please reach out to us. You may also contact us if you want to learn more about our monitoring services. The best way to reach us is to email support@alarmgrid.com. Or you may call us at (888) 818-7728. Remember that our support hours run from 9am to 8pm ET M-F. We look forward to helping you find the perfect product for your needs!

With the holiday season quickly approaching us, we thought it was a good time to present some holiday buying guides for various security systems. Today, we are focusing on the Honeywell Lyric. This guide will help whether you are considering a new Lyric or adding upon an existing one.

The Honeywell Lyric is currently the flagship all-in-one wireless security system from Resideo. It has been one of the most highly regarded alarm systems for the past few years for several reasons. The system supports up to 128 wireless zones, making it suitable for applications big and small. It has a built-in Z-Wave controller, and you can pair up to 72 Z-Wave devices for home automation purposes. The Lyric is also one of the very few alarm panels that can support Apple HomeKit, making it perfect for iOS users looking to expand upon their HomeKit Network. In fact, we believe that the Lyric is the top HomeKit Security System on the market at this time.

The other major appeal of the Lyric is the fact that it can technically be monitored using an IP only communication path. This is because it connects with AlarmNet360 and the Total Connect 2.0 platform. Unlike most other monitoring platforms like Alarm.com which require cellular connectivity, Resideo allows IP only monitoring for panels connected with TC2. The Lyric has a built-in WIFI card, so you can connect with a local network right out of the box. Although we always recommend cellular communication for optimal reliability, we do understand that many users will want to use IP only service as a cost-cutting measure. Additionally, you can always add a cellular communicator to the Lyric System if you decide that you want to go cellular later on. Both the Honeywell LYRICLTE-A (AT&T LTE) and the Honeywell LYRICLTE-V (Verizon LTE) are great options.

Building a Lyric System from Scratch

For new users starting from scratch, the best option is typically to buy a complete Honeywell Lyric Security System Kit. This will include everything you need to get started with alarm monitoring. Whether you plan to use IP only monitoring service, or you intend on setting up cellular service, there is a perfect kit for you. For those planning to go IP only, no cellular communicator is needed, and you should choose a kit labeled "WIFI Only". If you intend to use the system for cellular monitoring, then both AT&T and Verizon system kits are available. Whether you go with a 3-1 kit (3 contacts and 1 motion) or a 10-1 kit (10 contacts and 1 motion) should depend on the size of the building you are monitoring. You will need more contacts to cover more doors and windows.

We recommend going through the Lyric System Kit Page linked above and finding the perfect Lyric Kit for your needs. In addition to the system, sensors, and optional communicator, you will also get a Honeywell LT-Cable with every kit. This makes it super easy to get the system up and running without having to prepare any standard alarm wiring.

Sensors for New and Existing Lyric Systems

One of the best aspects of the Lyric is that it has one of the most diverse and complete lineup of supported sensors in the entire security industry. Resideo created a sensor lineup designed exclusively for their Lyric System in the Honeywell SiX Series Sensors. These powerful sensors offer an impressive communication range of up to 300 feet indoors and 128-bit AES encryption for enhanced wireless protection. The lineup includes the following products:

• SiXCT Door/Window Contact
• SiXMINICT Mini Door/Window Contact
• SiXPIR Motion Sensor
• SiXGB Glass Break Detector
• SiXSMOKE Smoke Detector
• SiXCOMBO Combination Smoke/CO Detector
• SiXSIREN Wireless Siren
• SiXFOB Wireless Key Fob

With this great lineup, you can achieve a total and complete Lyric Security System by only using SiX Series devices. And for most Lyric users, that is the best option. But these are not the only sensors you can use with the Lyric System. The Lyric is also compatible with nearly any uni-directional 345 MHz sensor, which includes most devices from the Honeywell 5800 Series and the 2GIG 345 MHz lineup. Additionally, these lineups are both a little more fleshed out than the SiX lineup. There are certain sensor types (e.g. outdoor sensors) where you will need to turn to one of these product lineups.

Many users will also supplement their SiX Series devices with Honeywell 5800 Sensors and 2GIG 345 MHz Sensors as a cost-saving measure. These 345 MHz sensors will work just as well as the SiX Series devices on the Lyric. The only difference is that the 345 MHz sensors will not utilize any encryption, making them more susceptible to wireless attacks. The Lyric does have protection against 345 MHz RF jamming, but it can offer some users better peace of mind to know that their wireless sensors are encrypted. But if you are comfortable using non-encrypted wireless devices, then 345 MHz sensors can save you a lot of money when designing your Lyric System.

Some of our favorite Honeywell and 2GIG 345 MHz Sensors for use with the Lyric include:

• VERSA-2GIG Door/Window Contact
• 2GIG DW20R Recessed Door/Window Contact
• Honeywell 5816OD Outdoor Door/Window Contact
• Honeywell 5800PIR-OD Outdoor Motion Sensor
• Optex FTN-RRHW Outdoor Motion Sensor
• Honeywell 5822T Garage Tilt Sensor

Other Accessories for Your Lyric

We have already covered the sensors you will use with your Lyric System. However, there are still other devices you may want to add to your setup. The biggest attraction are Z-Wave devices like lights, door locks, and smart thermostats. One admitted weakness of the Lyric is that its automation controller is only a standard Z-Wave controller. The Lyric does not offer a Z-Wave Plus controller, and Lyric users cannot take advantage of the extended range and increased battery life of Z-Wave Plus. You can still use Z-Wave Plus devices with the Lyric System, but they will only offer the functionality of classic Z-Wave peripherals.

With that limitation in mind, you can still use the Lyric as a perfectly capable smart home automation hub. You can even pair the system as a secondary controller to other automation hubs (e.g. Samsung SmartThings) for added flexibility in your smart home. Nearly any Z-Wave automation device can be used with the system, so feel free to explore your options. We have plenty of devices on our website. Just remember that the Lyric System cannot support Z-Wave security devices. The Lyric Z-Wave controller is for automation purposes only. Alarm Grid does not sell Z-Wave security sensors on its website.

If you want to use your Lyric to control your garage door, then you will want to invest in a Honeywell 5877GDPK. This kit includes everything you need to get started with garage door operation for your Lyric System. Inside the kit there is a Honeywell 5877 Z-Wave Garage Door Relay, a Honeywell 5822T Garage Door Tilt Sensor, and a FortrezZ Z-Wave Siren/Strobe. You can purchase these items separately, but this convenient kit makes things easier.

The Lyric has only one compatible wireless keypad option, which is the Honeywell LKP500. This is a fairly standard push-button keypad with an LCD screen. You might also consider getting a cheap tablet and mounting it to the wall and using that as a keypad. You can download the Honeywell My Home Controller App to the tablet and essentially make the device a permanently mounted touchscreen keypad for your Lyric.

Lastly, you might want to get a desk mount for your Lyric System. This will eliminate the need for mounting the panel to the wall. Desk mounts are great for people living in apartments or rental homes, as well as users who simply do not want to drill holes. Using a desk mount sure beats laying the system flat on a counter! The Lyric Desk Mount is called the Honeywell LCP500-DK. There is also a desk mount for the Honeywell LKP500 Lyric Keypad called the Honeywell LKP500-DK.

Ask Us Questions!

Don't be afraid to reach out to us at Alarm Grid if you have any questions about the Lyric, or if you need any help choosing a system and accessories. The best way to reach us is to email support@alarmgrid.com. You may also reach us over the phone at (888) 818-7728. Remember that our support hours run from 9am to 8pm ET M-F. We look forward to hearing from you!

Installing an outdoor motion detector is an excellent way to keep the perimeter of your home safe. These devices will allow you to know if anyone has trespassed on your property, and they can help ensure that the appropriate authorities are sent if needed. Outdoor motion detectors can also be used for home automation purposes as well. For example, you can set your system so that your lights turn on and your thermostat is adjusted automatically when your outdoor motion detector is triggered.

Choosing the best outdoor motion detector can seem like a daunting process. You’ll want a motion detector that can provide an acceptable range of detection, maintain a proper level of sensitivity, stand-up to inclement weather and communicate with your security system effectively. Each of these factors should be considered very carefully before deciding on which outdoor motion detector to purchase. You will also need to think about the type of security panel you own and its compatibility with the motion detector that you choose. Additionally, you may need to purchase an add-on, such as a signal translator or a wireless receiver so that your panel will work with the detector.

When considering which outdoor motion detector to use, it’s usually easiest to start by thinking about which type of panel you own. In this guide, we will cover some common security panels and discuss what we believe is the best motion detector for each system.

Outdoor Motion Sensors for the Honeywell Lyric Controller & LYNX Touch Panels

Honeywell’s wireless security systems are generally some of the easiest panels to use and set up with with security devices like outdoor motion detectors. Honeywell even makes its own outdoor motion detector, the Honeywell 5800PIR-OD, that is part of its 5800 Series of wireless devices. With its outstanding features, performance and reliability, not to mention its easy connectivity, the 5800PIR-OD is a great device to use with these Honeywell panels.

The 5800PIR-OD uses passive infrared (PIR) technology to detect the presence of motion. This means that the device looks out for infrared energy that is given off by a person. When the sensor detects a significant change in infrared energy, an alarm will be triggered. A user can configure the pulse count of the sensor to adjust its sensitivity. This will affect how large of a change in infrared energy is needed to activate the device. A higher pulse count will decrease the sensitivity of the sensor and require a larger change in infrared energy to be detected for an alarm to occur. In other words, adjusting the device to a low-sensitivity setting by increasing its pulse count will make a false alarm less likely to happen. The opposite is true for setting the device to a high-sensitivity setting with a low pulse count.

To further prevent false alarms, the 5800PIR-OD comes equipped with two different PIR detectors. Each detector must be tripped in order for the sensor to become triggered. This prevents things like small animals or falling leaves from setting off the device and triggering an alarm. However, a person is almost always large enough that they will activate both sensors and cause an alarm event to occur on your security system.

The Honeywell 5800PIR-OD is effective at detecting motion at a range of up to 40 feet. This range can also be reduced if desired. At this range, the device should be able to detect any events that are happening at important areas outside your home, while also not responding to occurrences that do not concern you. The 5800PIR-OD also features high, medium and low sensitivity settings, making it great for all applications.

As an outdoor motion detector, the Honeywell 5800PIR-OD is ready for almost anything that nature can dish out. The device includes a weather-resistant casing that prevents the detector from being damaged by heavy rain or moisture. This casing also ensures that fine particles such as dust or sand will not be able enter the inner-workings of the sensor and cause problems. The 5800PIR-OD is highly-effective in virtually any type of climate, being able to function properly in temperatures ranging from -4° to 122 ° Fahrenheit.

Setting up the 5800PIR-OD for use with the Lyric and LYNX panels is extremely easy. Like every other 5800 Series wireless device, the 5800PIR-OD can connect with these panels right out of the box. Just simply enroll the sensor with the panel through the system’s programming menu, install the detector in a desired location and it will be ready to use. The process is incredibly straight-forward, and it can typically be fully completed by almost any end-user.

Compatible Outdoor Motion Detectors for 2GIG GC3 and GC2 Panels

While 2GIG makes many fantastic devices for its security panels, the company does not offer any viable sensors for outdoor motion detection. However, just like the wireless Honeywell panels, both the 2GIG GC3 and GC2 function with the 5800PIR-OD with no additional add-ons needed. Because the 5800PIR-OD is such a phenomenal outdoor motion detector, we recommend it for use with these panels as well. Again, it’s as simple as enrolling the device within the panel’s programming menu and then installing the sensor.

Compatible Outdoor Motion Sensors for a Qolsys IQ Panel 2

Qolsys is a relatively young company whose IQ Panel 2 has received rave reviews from security experts. As a newer company, Qolsys is still working on improving its own in-house lineup of security devices. Keeping this in mind, we actually recommend looking to companies outside of Qolsys for an outdoor motion detector. With its amazing features and proven performance, the Honeywell 5800PIR-OD is actually an excellent device to pair with the Qolsys IQ Panel 2. The motion will require an external wireless translator to be utilized with the IQ Panel 2, but the 5800PIR-OD is still the best outdoor motion detector to use with the system.

Alarm Grid offers the Resolution Products RE524X, a great wireless translator that will allow the 5800PIR-OD to function with the Qolsys IQ Panel 2. The RE524X converts the signal sent by the 5800PIR-OD into one that is accepted by the IQ Panel 2. All you have to do is set up the RE524X with the IQ Panel 2 and then learn-in the motion detector with the RE524X. Once complete, you will be able to use the fantastic 5800PIR-OD with your innovative Qolsys panel.

Compatible Outdoor Motion Sensors for Honeywell Vista Panels

For wired systems like the Vista panels, it is usually desired to use a wireless receiver with in conjunction with a wireless outdoor motion detector. This because the sensor will typically be located far away from the system. A wireless receiver will allow a Vista panel to work with wireless devices.

Most owners of Vista Panels find that using a keypad with an integrated wireless receiver is the easiest solution for using wireless device with their Vista system. This way, they can have a keypad for controlling their security system and a much-needed wireless receiver in just one device. Our favorite keypad for this purpose is the Honeywell 6160RF keypad. The keypad can be easily hard-wired into any Vista panel, and it will serve as an excellent tool for controlling the system. Once connected, a wireless outdoor motion detector can be programmed with the panel. And just like the other Honeywell systems, we are strong supporters of using the 5800PIR-OD with any panel in the Vista lineup due to its great performance and general ease of use.